NEW STAR 3/4" LINEAR BALL BEARING OPEN PILLOW BLOCK 1753-212-00 This is a Fixed Auction for a New Star 3/4" Linear Ball Bearing Open Pillow Block with Super Linear Bushing, Model 1753-212-00. Rigid cast iron block Self-aligning sleeve Standard bushing insert Fully sealed both ends Adjustable open bore Load capacities Static - 308 lbf Measures 1 9/16" Long For more Information see: http://www.airlinehyd.com/Images/ElectroControls/Bosch_Rexr
This Martin 1610 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel.
This is a new, old stock, cast iron V-Belt pulley. It measures 5.75 inches in diameter and the max belt width is 5/8. It has a tapered split bushing with it and the bore is 1 inch with a 1/4" wide key slot.
Listed for your consideration is a vintage cast iron or steel banding tool or strapping machine. There are no markings of any kind to indicate manufacturer or country of origin. It is very well made and operates smoothly.
2 Heavy Duty Flange 1 3/8 Bearings (used in very good condition) The bearings have a small amount of sufface rust. This doesn't effect the bearing. The used bearing turn smoothly These are 2 used but still very good Flange bushing.
This is a real nice original cast iron pulley for an International Harvester Tom Thumb or 1hp Famous or Titan gas engine. It may also be correct for the 1hp Titan engines. It is part number G-6618 and is in excellent condition with no cracks, breaks, or repairs of any kind except for a small chip on one edge.
This is a real nice original cast iron pulley for an International Harvester 1 1/2-2 1/2 or 3-5hp LA or LB gas engine. It is part number 3591-D and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 4 3/4 inches in diameter.
This is a real nice original cast iron pulley for an International Harvester 1 1/2hp Type M engine or a 1 3/4hp International Harvester Mogul engine. It is part number 969T and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 6 inches in diameter.
One set of 8" x 2" V-GROOVED Cast Iron Wheel casters. Set includes 2x rigid casters. Plate size: 3-15/16" x 4-1/2" Bolt Hole Spacing: 2-5/8" x 3-5/8" Bolt Hole Size: 3/8" Bearing Type: steel roller bearing (1-7/8"-L 1-3/16"O.D 3/4"I.D) Axle Diameter: 1/2"
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.