US $26.95
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Shape | V Block |
| Block Material | Cast Iron | ||
| Country/Region of Manufacture | India | ||
| MPN | Does Not Apply | ||
| Sold As | Set Of 2 Pcs In Matching Pair | ||
| Block Type | V-Block | ||
| L X W X H | 3"x 1-5/16" x 2-3/8" | ||
| Brand | Unbranded | ||
| Packing | Hard Board Box | ||
| UPC | Does not apply |
Directions
Similar products from Supporting Blocks & Sets
Abbott Workholding Mill Tombstone Aluminum Milling Fixture Box Block bidadoo
Mill Tombstone Steel Workholding Milling Fixture Box Block w/8" Vise bidadoo
Precision Machinist Steel V Blocks 13-3/4L X 2"W X 6-1/4”H, 142° Vee, 42 lbs.
V Block Pair 6” Machinist Milling Angle Plate, Right Angle, Cast Iron
Large Double V Block Machinist Work Holding
Machinist Unusual, Double V, set up Block with clamps
Parallel Set 10 Pair 1/8” Thick 6” long +/-.0002” w/Case SPI 98-446-8
Brown & Sharpe Ultra Precision Ground 1-2-3 Block Sets 599-750-10
2 QTY 23 Holes Precision 25mm x 50mm x 75mm Blocks Gauge
PAIR OF CAST IRON V BLOCKS 3-1/4" V WIDTHS 2-1/2" X 3-1/2" X 6"
Armstrong No. 1 Machinist Screw Jack Milling Machine Lathe Leveling Jack Vintage
Machinist Set Up Fixture Block 4 X 4 X 4
custom ma Vee Blocks Machinist Tool Maker
V-Block and Clamp Set Hardened Steel 1 5/8" x 1 1/4" x 1 1/4"
Two Machinist Grinding Long Swivel Clamps Blocks with Holes Holding Tools T61 MS
INA GZ W9 KWSE45 G2-V2 FA520/OS Linear Carriage Block 4"x5"x2" Machinist Tool
Magnetic v block 65X65X50mm HARDENED & GROUNDED high power set of 2 piece
Magnetic v block 150X95X75mm HARDENED & GROUNDED high power set of 2 piece
Steel V Block 50 x 30 x 30mm With Set Of 2 Clamp Premium Quality
People who viewed this item also vieved
NICE!! BULLNOSE LIVE CENTER MT 3
MAIER 8" 4 JAW INDEPENDENT LATHE CHUCK w/ 1-3/4" HOLE THRU AND D1-4 MOUNT 6419
Collis Tool Milling Chuck Collet 1/4" to 5/8" Universal Chucks Collets Lathe
Chevalier Walker Kent Okamoto Brown & Sharp Magnetic Chuck
1 Pcs T-Slot Nut 1/2Inches M12 Slot Nuts Clamping Undersized Machine Table Slot
AIRCRAFT TOOLS 3/32"100pcs used KWIK-LOK SPRING CLECOS MIX WITH LONG SPRING BODY
Armstrong C Clamp 78-406 Made In The USA Rare
WILLIAMS 460 SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING
ASAHI 45-48 SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING
Quick Change Tool Post Turning And Facing Holder 250-101
LOT OF ASSORTED UNIVERSAL FLEX COLLETS
Mhc 5C Collet - Lot Of 4 - All Are New - Size: 3/4
424.2-420-11 1 11/16" Collet Sandvik Brand 1pc
8-1/4" HEAVY DUTY FACE PLATE W/ 2-1/4"-8 THREADED BACK PLATE
COMPOUND SINE PLATE 12 X 12 WITH 10 INCH BAR
KEARNEY & TRECKER CAST TAIL STOCK ADJUSTABLE CENTER HEIGHT
Lifting Magnet - Magnetic Lifter 300 KG - 660 Lbs Lifting Capacity with 2" Steel
LATHE DOG SET / LATHE / MACHINIST TOOLS
Rotary Table 16" Pratt & Whitney
Camco # 601RDM2-20-330 Index Drive
NEW SHOP FOX M1076 4" ROTARY TABLE-WITH CLAMPS.
Speedy Pneumatic Air Vise ~ American Gator ~ Great for Drill Press
Vintage Fowler 52-466-000 Steel Toolmaker Vise Made In Japan
Grinding Vise Toolmaker Machinist 2.8 x 7.5 x 2.68 CLAMPING 2.8 x 3.68 x 1.25
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies