US $100.00
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Country/Region of Manufacture | Taiwan |
| MPN | 98-446-8 | ||
| Featured Refinements | Parallel Set | ||
| Brand | SPI (Swiss Precision Instruments) |
Directions
Similar products from Supporting Blocks & Sets
Jewelers 14 Pcs Dapping Punch Set with Wooden Stand 1" Square Doming Block
Ultimate Vee V Block All Angle Toolmakers Universal & Clamp Set (Hardened) New
Precision Magnetic Vee Blocks Size 85 x 70 x 60mm V Block Matched Pair Heavy New
New Dapping Doming Punch & Block Set - 8 Pieces 5mm to 27mm - HARDENED
Abbott Workholding Mill Tombstone Aluminum Milling Fixture Box Block bidadoo
Mill Tombstone Steel Workholding Milling Fixture Box Block w/8" Vise bidadoo
Precision Machinist Steel V Blocks 13-3/4L X 2"W X 6-1/4”H, 142° Vee, 42 lbs.
V Block Pair 6” Machinist Milling Angle Plate, Right Angle, Cast Iron
Large Double V Block Machinist Work Holding
Machinist Unusual, Double V, set up Block with clamps
Brown & Sharpe Ultra Precision Ground 1-2-3 Block Sets 599-750-10
2 QTY 23 Holes Precision 25mm x 50mm x 75mm Blocks Gauge
PAIR OF CAST IRON V BLOCKS 3-1/4" V WIDTHS 2-1/2" X 3-1/2" X 6"
Cast Iron V Blocks 3" x 1 5/16" x 2 3/8" Vee Block 75MM Set 2 Pc New Old Stock
Armstrong No. 1 Machinist Screw Jack Milling Machine Lathe Leveling Jack Vintage
Machinist Set Up Fixture Block 4 X 4 X 4
custom ma Vee Blocks Machinist Tool Maker
V-Block and Clamp Set Hardened Steel 1 5/8" x 1 1/4" x 1 1/4"
Two Machinist Grinding Long Swivel Clamps Blocks with Holes Holding Tools T61 MS
People who viewed this item also vieved
LARGE 6" Wide Bullnose LIVE CENTER LATHE OLD WORKS
LIVE CENTER 3MT SHANK IN AS-IS CONDITION
BUCK MANUAL LATHE CHUCK 10 INCH ADJUST TRU with PLAIN BACK
TONGUE AND GROOVE T&G CHUCK JAWS , 6 SETS
Kitagawa BB-210 10" Power Jaw Lathe Chuck
(347) CARR LANE 4BLPT2. 50C QUANTITY 5 NEW IN PACKAGE
DE-STA-CO 807-U Pneumatic 375 lb. Hold Down Clamp New
Billings heavy duty Service c-clamp
GEDORE 98-100mm SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING
68-72 SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING
NIKKEN HC SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING
Parlec ER11-0039 Spring Collet - 11 mm - Size Range .5 - 1 mm -
SYIC ER20 Spring Collet 7/32" Machinist Lathe Mill Chuck holder Tools collets
HEAVY DUTY 5C 6" OD FIXTURE MOUNT
8-3/4" HEAVY DUTY BACK PLATE W/ 2-1/4"-8 THREADED MOUNT
8-1/4" HEAVY DUTY FACE PLATE W/ 2-1/4"-8 THREADED BACK PLATE
Magnetic Lifter 600 KG - 1320 Lb Lifting Magnet Steel Mag Hoist - Crane - Lift
MACHINISTS/TOOLMAKERS LIFT SWING by Accurate Bushing.C0. Model 3220A
BIG Kaiser 15.260.160 Turbo Unilock Zero-Point Clamping System Workholding Chuck
Hansford Davis Keyseater / Keyway Indexing Table
08 CAMCO FERGUSON 90 800RDH56 120-60-120-60 OSCILLATOR INDEX DRIVE 7300C REDUC
Rotary Table 16" Pratt & Whitney
Wilton AC-326 90 Degree Steel Clamp
Vintage Palmgren No.30 Machinist Vise
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies