CBN (Cubic Boron Nitride), SGN1 NR-3078 L Grooving Insert .078 Radius NIB, US $40.00 – Picture 0

CBN (Cubic Boron Nitride), SGN1 NR-3078 L Grooving Insert .078 Radius NIB, US $40.00 – Picture 1

Cbn (cubic Boron Nitride), Sgn1 Nr-3078 L Grooving Insert .078 Radius Nib

US $40.00

Collegeville, Pennsylvania, United States
Jan 30th

Open on mobile:
QR code

CBN (Cubic Boron Nitride), SGN1 NR-3078 L Grooving Insert .078 Radius NIB Cubic Boron Nitride (CBN) can be used to Groove a variety of standard and exotic materials Advantages of CBN Cutting Tools The advantages that CBN cutting tools offer the metalworking industry more than offset there higher initial costs. Primarily designed to machine very hard and difficult-to grind (DTG) metals, CBN tools are capable of greatly improving productivity, reducing scrap parts, and increasing the quality of the product. Long Tool Life CBN: cutting tools have properties which resist chipping and cracking and provide uniform hardness and abrasion resistance in all directions. They may outperform conventional cutting tools by as much as 50 times. Reduced tool wear results in closer tolerances on work pieces, and fewer tool adjustments keep machine down-time to a minimum. The increased reliability of CBN cutting tools makes them a major factor in automating machining operations. High Material-Removal Rates: Because CBN cutting tools are so hard and resist abrasion so well, cutting speeds in the range of 250 to 400 ft/min are possible on hardened steels and speeds of 5000 ft/min are possible in pearlitic cast iron. CBN cutting tools can with stand the high temperatures created by increased speeds and feeds. This results in higher material-removal rates with less tool wear, which reduces the total machining cost per piece. Cutting Hard, Tough Materials: CBN cutting tools are so hard that they can efficiently machine steel with hardness of Rc 45 and above. CBN is also used for machining cobalt-base and nickel-base high-temperature alloys with hardness of Rc 35 and above. Uniform Surface Finish: Surface finishes of less than 10 micron. are possible, which often eliminate the need for relatively slow finishing operations such as conventional grinding Lower Cost per Piece: CBN cutting tools stay sharp and cut efficiently through long production runs. These results in better control over work piece shape and size and fewer cutting-tool changes. This lowers manufacturing costs per piece by reducing inspection time and increasing machine uptime.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	NR-3078 L
MPN	NR-3078 L