+ Post new Ad
Central Tools Telescoping Guage Set of 6 68400, US $32.00 – Picture 0
Central Tools Telescoping Guage Set of 6 68400, US $32.00 – Picture 0

Central Tools Telescoping Guage Set Of 6 68400

US $32.00

  • Niceville, Florida, United States
  • Feb 14th
Open on mobile:
QR code
Often called snap gauges, fit them in a cylinder bore or other hole. rock back and forth and tighten up then measure with micrometer. These have a little surface corrosion.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Central Tool
Country/Region of Manufacture United States
MPN 68400

Directions

Similar products from Multidetectors & Inspection Gauges

MACHINIST'S STARRETT #832 WIGGLER CENTER FINDER

MACHINIST'S STARRETT #832 WIGGLER CENTER FINDER

  • Golden Valley, Arizona, United States
  • Feb 14th
TORQUE GAUGE ATTACHMENT TKM-0027-000 NSC10278

TORQUE GAUGE ATTACHMENT TKM-0027-000 NSC10278

  • Cedar Falls, Iowa, United States
  • Feb 14th
Mitutoyo 6 piece Telescoping Gage Set 155-903 from 5/16-6"

Mitutoyo 6 piece Telescoping Gage Set 155-903 from 5/16-6"

  • Alhambra, California, United States
  • Feb 14th
Sunnen PG 400 Gage

Sunnen PG 400 Gage

  • Columbia, Tennessee, United States
  • Feb 14th
3 FEDERAL GAGES Dial indicators

3 FEDERAL GAGES Dial indicators

  • Newark, New York, United States
  • Feb 14th
MACHINIST'S STARRETT #229A TELESCOPE TELESCOPING SNAP GAGE NEW IN BOX

MACHINIST'S STARRETT #229A TELESCOPE TELESCOPING SNAP GAGE NEW IN BOX

  • Golden Valley, Arizona, United States
  • Feb 14th
NDT Ultrasonic Slide Plotter

NDT Ultrasonic Slide Plotter

  • Liberal, Missouri, United States
  • Feb 14th
MACHINIST TOOLS LATHE MILL 2 Boxes of Deltronic Pin Plug Gage s Gauge s s

MACHINIST TOOLS LATHE MILL 2 Boxes of Deltronic Pin Plug Gage s Gauge s s

  • Newark, New York, United States
  • Feb 14th
Starrett machinist tool lot

Starrett machinist tool lot

  • Cornwall, New York, United States
  • Feb 14th
Standard Gage Company Dial Snap Gage 2"-3" With Calibration and Wooden Case .

Standard Gage Company Dial Snap Gage 2"-3" With Calibration and Wooden Case .

  • Utica, New York, United States
  • Feb 14th
Antique machinist tool lot

Antique machinist tool lot

  • Cornwall, New York, United States
  • Feb 14th
INTERTEST 75 2.0-2.8" .001" Gauge. German made (The Dyer Company)W/CASE

INTERTEST 75 2.0-2.8" .001" Gauge. German made (The Dyer Company)W/CASE

  • Beverly Hills, California, United States
  • Feb 14th
Center finder

Center finder

  • Robstown, Texas, United States
  • Feb 14th
1" 8 UNC 2B THREAD PLUG GAGE GO NO GO 1.0 P.D.'S= .9188 AND .9276. New Made USA

1" 8 UNC 2B THREAD PLUG GAGE GO NO GO 1.0 P.D.'S= .9188 AND .9276. New Made USA

  • Temecula, California, United States
  • Feb 14th
Greenfield GTD #G151516 8-32 UNC-2B Thread Plug Gage Go NoGo Gauge No-Go ~ New

Greenfield GTD #G151516 8-32 UNC-2B Thread Plug Gage Go NoGo Gauge No-Go ~ New

  • West Bloomfield, Michigan, United States
  • Feb 14th
VINTAGE INSPECTION GAUGE MADE IN GERMANY WORKING ORDER

VINTAGE INSPECTION GAUGE MADE IN GERMANY WORKING ORDER

  • Hudson, Ohio, United States
  • Feb 14th
VINTAGE AMINCO BRENNER MAGNE-GAGE METAL COATING THICKNESS GAUGE

VINTAGE AMINCO BRENNER MAGNE-GAGE METAL COATING THICKNESS GAUGE

  • Crestline, Ohio, United States
  • Feb 13th
GO NOGO Plug Gages Thead gages gage sets Ring gages

GO NOGO Plug Gages Thead gages gage sets Ring gages

  • Newark, New York, United States
  • Feb 13th
STARRETT NO. S154LZ SET OF SIX Adjustable Parallels IN CASE/box 3/8"-2 1/4"

STARRETT NO. S154LZ SET OF SIX Adjustable Parallels IN CASE/box 3/8"-2 1/4"

  • Jacksonville, Alabama, United States
  • Feb 13th
STARRETT NO. 55 ZZ-3 IN WOOD CASE/box 3" Precision Square Nice

STARRETT NO. 55 ZZ-3 IN WOOD CASE/box 3" Precision Square Nice

  • Jacksonville, Alabama, United States
  • Feb 13th

People who viewed this item also vieved

Miltex Dental Caliper

Miltex Dental Caliper

  • Pompano Beach, Florida, United States
  • Jan 30th
Mitutoyo 500-474 Solar Powered 6" Caliper

Mitutoyo 500-474 Solar Powered 6" Caliper

  • Clover, South Carolina, United States
  • Jan 30th
Hexagon Tesa Sheffield DCC Servo Board CMM Renishaw Tesa Probe 90 Day Warranty

Hexagon Tesa Sheffield DCC Servo Board CMM Renishaw Tesa Probe 90 Day Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
Brown Sharpe CMM Coordinate Measuring Machine CMM Validator

Brown Sharpe CMM Coordinate Measuring Machine CMM Validator

  • Dayton, Ohio, United States
  • Jan 30th
METRIC DIAL INDICATOR 0.01 GRADUATION, APPROX 1/4 TRAVEL ( C-4-6-6-3-R)

METRIC DIAL INDICATOR 0.01 GRADUATION, APPROX 1/4 TRAVEL ( C-4-6-6-3-R)

  • Mitchell, Indiana, United States
  • Jan 30th
Starrett 2-3" blade micrometer factory refurbished, excellent condition

Starrett 2-3" blade micrometer factory refurbished, excellent condition

  • Madison, Ohio, United States
  • Jan 30th
Mitutoyo Micrometer No 103-226 Range 11" to 12" with Standards .0001

Mitutoyo Micrometer No 103-226 Range 11" to 12" with Standards .0001

  • Milton Freewater, Oregon, United States
  • Jan 30th
Starrett Micrometer No 224 Set D Range 12" to 16" with Standards .001

Starrett Micrometer No 224 Set D Range 12" to 16" with Standards .001

  • Milton Freewater, Oregon, United States
  • Jan 30th
Starrett No. 66 Thickness Gage With 26 Leaves L@@K No Reserve Machinist Tool....

Starrett No. 66 Thickness Gage With 26 Leaves L@@K No Reserve Machinist Tool....

  • Connersville, Indiana, United States
  • Feb 13th
MICROMETER MEASUREING RODS ONE SET 1" TO 5"

MICROMETER MEASUREING RODS ONE SET 1" TO 5"

  • Painesville, Ohio, United States
  • Feb 13th
VINTAGE MACHINIST RULE STAND RIGHT ANGLE BASE W/ ADJUSTABLE HEIGHT

VINTAGE MACHINIST RULE STAND RIGHT ANGLE BASE W/ ADJUSTABLE HEIGHT

  • Waterford, Michigan, United States
  • Feb 16th
Rigging Plate Set Vane Angle NSN 4920-01-142-3701 GE P/N 3C3175G01

Rigging Plate Set Vane Angle NSN 4920-01-142-3701 GE P/N 3C3175G01

  • Pickens, South Carolina, United States
  • Feb 16th
Starrett 578B Hardened Steel Clamp W/ Two Screws

Starrett 578B Hardened Steel Clamp W/ Two Screws

  • Richmond Hill, New York, United States
  • Mar 2nd
Brown&Sharpe No.540 Master Square 12"

Brown&Sharpe No.540 Master Square 12"

  • Encino, California, United States
  • Mar 2nd
Lot Of Surface Gage Guage Base Parts Bases Machinist Magnet Steampunk Lamp Base

Lot Of Surface Gage Guage Base Parts Bases Machinist Magnet Steampunk Lamp Base

  • Rockford, Illinois, United States
  • Mar 11th
Magnetic Base Stand Holder for Dial Test Indicator Gauge

Magnetic Base Stand Holder for Dial Test Indicator Gauge

  • Kalamazoo, Michigan, United States
  • Mar 11th
Starrett Center Finder and Protractor

Starrett Center Finder and Protractor

  • Boaz, Alabama, United States
  • May 2nd
Combination Square Protractor Head Only and Rule Depth Gage

Combination Square Protractor Head Only and Rule Depth Gage

  • Long Beach, California, United States
  • May 3rd
Standridge Granite Machine Base Table Stand 24"x24"x6" 3' Surface Plate Height

Standridge Granite Machine Base Table Stand 24"x24"x6" 3' Surface Plate Height

  • Mountain View, California, United States
  • May 23rd
V BLOCKS PRECISION PAIR MACHINIST BLOCKS

V BLOCKS PRECISION PAIR MACHINIST BLOCKS

  • Arlington, Texas, United States
  • May 24th
Surface Plate Inspection Layout 10 inch x 14 inch x 2 inch 5/16 tapped holes

Surface Plate Inspection Layout 10 inch x 14 inch x 2 inch 5/16 tapped holes

  • Palos Hills, Illinois, United States
  • May 24th
Gage blocks (36 piece set)

Gage blocks (36 piece set)

  • San Jose, California, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies