Hewlett Packard HP 54120B Digitizing Oscilloscope Mainframe 20 GHz, 4 Channel, S/N 290900101 Color display 0.25ps time interval resolution Sweep speed: 1s/div to 10ps/div 32µV resolution 4% vertical accuracy Time and voltage histograms HP-IB interface 115/230Vac +15% -25%; 48-66Hz operatio WYSIWYG We ne
CDM 1550 LS, UHF, 450 to 512 Mhz range, 25 watt, 16 channel, 12.5 and 25 kHz channel spacing. Used but in good condition Note: Im cutting back on my inventory and i'll let these go at a good price, no reserve.
Genuine U.S. Military Issue Surplus Incom International – Aluminum Air Conditioning Filter Element - P/N: 125749-004 (NOS) (NOS) = New Old Stock P/N: 125749-004 This item cross-references to the following.... Falls Filtration Technologies Inc.
WE ARE DOWNSIZING OUR WAREHOUSE AND HAVE 145 EACH OF THESE FORK ENTRY BARS OR PALLET SUPPORTS FOR 42" DEEP ROLL FORMED STEP BEAMS OR CHANNEL BEAMS. THEY ARE WELDED TOGETHER FROM 3" STRUCTURAL CHANNEL WITH THE TOP BEING 42" LONG AND EACH HOLDING PIECE 3 1/2" LONG. WEIGHT IS 14 1/2# EACH.
Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.
Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
