chuck machine for sale, brand-new and used.

Model: 618 Micromaster BROWN & SHARPE 6" X 18" Hydraulic Surface Grinder, S/N: 523-61819329 (New 1983) Specifications: Width and length of work ground Height of work ground with 8" diameter wheel Range: longitudinal (maximum) cross vertical Feeds: longitudinal

Model: SH-920 SHARP 9" x 20" Hydraulic Surface Grinder, S/N: 90905-04 (New 1999) Specifications: Table travel: longitudinal cross Spindle center to table surface Table working surface Longitudinal hydraulic table feed Intermittent cross feed Continuous cross feed Cross feed graduations Cross feed per revolution of handwheel Vertical feed gradu

Model: Micromaster BROWN & SHARPE, 6" x 18" Hydraulic Surface Grinder, S/N 523-6181-7382 (New 1978) Specifications: Width and length of work ground Height of work ground with 8" diameter wheel Range: longitudinal (maximum) cross vertical Feeds: longitudinal cross Grinding wheel speed Grinding wheel size,

A local company is in the process of re-locating its machine shop facility. In doing so, the maintenance shop is being liquidated along with any surplus tools and accessories from the machine shop. As the pieces are released for disposition they will be listed for sale.

This BUCK 10" 3 jaw chuck with D1-6 spindle mount came in as industrial surplus. Has removable jaws. It was sold at the same location as the lathe so it was not gotten rid of because bad but due to no longer being needed.

Used Columbia Metal lathe 18"X40" with 2 3/4" spindle bore. Includes 12" reversible 3 jaw chuck with bolt on mount, carriage stop, thread dial, chip pan, and lantern toolpost. It is missing the thread chart, amp gage broke, and an electrical box cover.

UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-

TAKE ADVANTAGE OF SECTION 179 BAILEIGH Metal Lathe – PL-1860E (http://metal.baileighindustrial.com/metal-lathe-pl-1860e) This machine is wired for 220V, 3-phase, but the package includes a 5 HP phase converter (Phase Perfect model PT355) that allows it to run on single phase. Swing over bed: 18.0 in. Cross slide travel: 11.365 in.

Tailstock Accessories for Tabletop Lathes from LatheCity

Sherline Lathe Accessory from LatheCity Connects a standard Jacobs drill chuck to Sherline tailstock 1/2”-20 to Morse Taper #0

1982 Mori Seiki SL-2 CNC Lathe 2 Axis S/N: 12022006 Centroid CNC Retrofit S/N: 30096, included new servo motors, spindle motor controller, and more. Specifications:Swing Over Bed: 22.4inSwing Over Cross Slide: 13.7inX Axis Travel: 6inZ Axis Travel: 16inSuggested Chuck Size: 8inSpindle Motor: 15HP12 Station TurretCentroid T-400 Control

Up for immediate sale is a Mazak M5 x 1500 CNC lathe it has twin turrets for tool holders. Equipped with 12" SMW Hydraulic chuck, Fanuc 6t control with a Greco 3.5 floppy drive for loading programs. Machine is under power and can be viewed in Midlothian, IL to schedule a viewing I can be reached at 708-288-2678.

THIS AUCTION IS FOR A USED CLAUSING MODEL 4900 10" X 36" TOOL ROOM ENGINE LATHE. MACHINES DATA TAG HAS BEEN REMOVED! MACHINE IS A 4900 SERIES LATHE.

7/16 TOOL STEEL HEX Lathe Chuck Key Shaft is 3- 5/8 Long with 1/4" handle, 4-3/4 long Shipping by USPS to USA only with tracking, NO international I value my feedback so please leave positive feedback. If you are unhappy in any way please contact me prior to feedback. Its better to correspond and work out issues before finalizing anything other &nbs

Hardinge CRIB-28-3 Adjustable offset lathe chuck. Input shaft is 1/2" and output hole is 5/16". Offset is adjustable from 0 - 7/8".

Clausing Model 4904 10 x 24" lathe with 3 and 4 jaw chucks, faceplate, Burnard collet chuck and a set of collets, 4 way and rocker toolposts, live centers, and a tailstock chuck. Ways are not bad and the screws are fairly tight. Machine is 230v 3 phase but you could always change the motor if you need single phase.

Parlec cat40 collet chuck with 4 collets. See pics of exactly what you will receive. Single angle TG/PG 100 collet series.

3 JAW CHUCK , quick change tool holder,BEDWAYS ARE IN EXCELLENT SHAPE ON THIS MACHINE NO BACKLASH MACHINE IS GOOD AND TIGHT CAME OUT OF A TOOLROOM PROTOTYPE SHOP 3 PHASE 220/208/440 Live center drill chuck and more just email me for more details runs great.

good used Acura-Flex straight shank collet chuck shank is 3/4" dia x 7" OAL please check my other auctions and happy bidding! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!