chuck machine for sale, brand-new and used.

This auction is only for the Quill, Spindle, 1/2" Drill Chuck For A Walker Turner Radial Drill Press.The photo of the drill press is only to show which model it came from.DRILL PRESS NOT INCLUDEDQuill Diameter 1-13/16", The od of the spline shaft is 5/8".The drill chuck has been welded on to the spindle. Please visit our website, lostcreekmachine.com

This auction is for an Acra Tap tapping Chuck made by TSD Universal Engineering. It uses Acra-Tap collets up to 1-1/2" capacity. The collets are available in sizes from 3/4" to 1-1/2" hand taps and 1/2" to 1-1/2" pipe taps.

  FLOATING TAPPING CHUCK FOR ER COLLETS - MT2 SHANK WITH TANG #L76  

FLOATING TAPPING CHUCK FOR ER COLLETS - STRAIGHT SHANK #L67

  FLOATING TAPPING CHUCK FOR ER COLLETS - BT ARBOR #L77  

FLOATING TAPPING CHUCK FOR ER COLLETS - MORSE TAPER SHANK #L75

Buying 1 (one) Valco coolant collar mt3 collet chucks. Fits mt3 spindle bores. You will receive 1 of the 3 items pictured randomly

Used but in good condition. 1/2"-20 Threaded Spindle nose with threaded collar. Includes: 5/64"-1/2" Craftsman Drill Chuck Total Spindle length with drill chuck removed is 14" Quill: 1.812" Dia.

Swiss Made Erowa ER-007697 ITS Mechanical Screw Chuck and 5-C Collet Face Plate for the manufacturing of electrodes. "Like New Condition" guaranteed A note to potential buyer's...the retail value just for the EROWA Mechanical Screw Chuck is $ 1,462.00 The Erowa screw chuck is precisely mounted by means of alignment pins and screws on center of a 5-C Collet Face Plate custom made to be used for CNC TURNING, FORM GRINDING, DIVIDING HEADS and SPIN FIXTURES such as a Harig Grind-All.

Used with very low hours. Bought new in late 2013. Very, very clean.

BEFORE BIDDING, PLEASE CHECK MAXIMUM OPENING OF YOUR VALVE CHUCK.The actual diameter of the diamond holder is 0.56 in.Could be used on older 6300, 6305 (A, T) and newer models. INSTALLATION RULE: the tip of the diamond must be under the horizontal center line of the grinding stone. 1.

A local company is in the process of re-locating its machine shop facility. In doing so, the maintenance shop is being liquidated along with any surplus tools and accessories from the machine shop. As the pieces are released for disposition they will be listed for sale.

We are selling a Surface grinder, Thompson CNC controlled surface grinder with a electric chuck... 12 x 36 ........ pulsating D magnetizing ability the company/computer installer, that put this control together for the federal government, at Cherry Point North Carolina, this computer integrated company is still in business and has all the numerical control components spare parts the phone number is still active that's on the control.

Model: Micromaster BROWN & SHARPE, 6" x 18" Hydraulic Surface Grinder, S/N 523-6182-8105 (New 1979) Specifications: Width and length of work ground Height of work ground with 7" diameter wheel Range: longitudinal (maximum) cross vertical Feeds: longitudinal &n

Sottof Sales Very nice arbor for a Buck 3 or 6 Jaw Adjust Tru chuck, original Cincinnati part for a No. 2 Tool and cutter grinder or any machine with a Brown & Sharpe No. 12 Taper.

SquareTrade © AP6.0

Model: 612H REID FAYSCOTT 6" X 12" Hand Feed Surface Grinder, S/N: 14487 (New 1959, Rebuilt/Reconditioned Approximately 1990) Specifications: Table travel: longitudinal cross Maximum distance, bottom of 7" diameter wheel to top of table Size of grinding wheel

Up for sell is a super nice acer surface grinder has a 6x18 chuck the machine has never been painted or even cleaned up by myself looks to be in 90% or better shape the machine came out of a small shop in sc and has zero problems all it needs is a shop I will skid and load I would suggest you come local pickup because how nice it is but if you have to ship I can assist in getting it on a pallet and ready to go at no charge thanks 336 479 6847 Tripp

Model: SGS-618M SUNNY (FREEPORT) 6" X 18" Hand Feed Surface Grinder, S/N: 611024 (New 1996) Specifications: Working surface of table Maximum table travel : longitudinal cross Maximum distance from tabl