circuit breaker lock for sale, brand-new and used.

New lock out tag out set. Come with 3 circuit breaker devices and 1 multi pad lock user lockout identifier 

The Mater Lock No. 493B Grip Tight Circuit Breaker Lockout Device fits standard height and tie-bar toggles typically found on 120 and 240 volt breakers. The innovative patented Grip Tight design effectively locks out circuit breakers with a simple thumb turn and then close clamping handle for a tight grip on the toggle.

::Index::

Accuform Signs KDD160 STOPOUT 120/240 Circuit Breaker Lockout (Single Pole) With Bar Clamp and Changeable Lockout Tag

New Product! Elimia equipment disconnect with supplemental circuit breaker. Nema 4X rated enclosure and handle, suitable for outside mounting.

Product Description Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for one, two, three or four pole circuit breaker, required no tools for installation and available as pin in, pin out and pin wide type.

TECHNICAL SPECIFICATIONS:(OSHA EM LOCKOUT TAGOUT KIT - 8) Weighs - 2.7 kgs S.No.

FEDERAL  PACIFIC ELECTRIC   FPE   20 AMP Full Size Circuit Breakers Type NA  Used circuit breakers in good condition. There were operational when removed from service due to an electrical upgrade. These breaker have been visually inspected and continuity tested, they are CLEAN, the terminal lugs are included and rated AL-CU. This is the Stab-Lock type.  The pictures in this listing show one of the actual breakers for sale.

Description for 120/277V Clamp-On Breaker Lockouts Clamp-on breaker lockouts are easy to install using patented thumbscrew design - no screwdrivers needed! Simply tighten lockou

TECHNICAL SPECIFICATIONS:(INDUSTRIAL LOCKOUT TAGOUT STATION KIT-2) Weighs - 7 kgs s.No.

TECHNICAL SPECIFICATIONS:(INDUSTRIAL LOCKOUT TAGOUT STATION KIT-1) Weighs - 6.5 kgs s.No.

TECHNICAL SPECIFICATIONS:(INDUSTRIAL LOCKOUT TAGOUT STATION KIT-3) Weighs - 8 kgs S No.

FEDERAL PACIFIC 20 amp 1-pole type NC is a stab-lock breaker. It provides one 20amp 120volt circuit and is used for 12 gauge wire. This lot is for 1 used Federal pacific Breaker.

Brady 277 Volt no hole circuit breaker lock-out 6 pack New  Catalog no. 65965 Ref. Y67874

This Masterlock 12 Piece Electrical Lockout Kit is delivered in a practical toolbox for easy transportation. The toolbox is rugged, strong with a large storage capacity. Can be locked with a padlock (takes shackles up to 6 mm in diame

Lock-out safety switch, pad driver, and free-floating handle for user comfort and better performance. Made of rotationally-molded polyethylene that won't crack, dent, rust or corrode.

MLT4200 Light Tower Mobile Lighting with 19 kW Performance

Products Descri