+ Post new Ad
Clausing 12" x 36" Precision Floor Model Metal Cutting Lathe, Model # 5912, US $7300 – Picture 0
Clausing 12" x 36" Precision Floor Model Metal Cutting Lathe, Model # 5912, US $7300 – Picture 0

Clausing 12" X 36" Precision Floor Model Metal Cutting Lathe, Model # 5912

US $7300

  • Plain City, Ohio, United States
  • Jun 11th
Open on mobile:
QR code
Technical Specifications: 230V/3PH/60HZ S/N: 506251 Swing over bed and saddle wings: 12-1/4" Swing over cross slide: 7-1/4" Hole through spindle: 1-3/8" Collet capacity: 1-1/16" Distance between centers: 36" Spindle speeds: 52 - 2000 RPM, infinitely variable Threading: 4 to 224 TPI (54) Longitudinal feeds:  .00065" to .0367" per rev. Cross feeds:  .00032" to .01834" per rev. Spindle nose: L-00 taper key drive Headstock and tailstock taper: #3MT Cross slide travel: 7-1/4" Compound rest travel: 2-1/2" Tailstock spindle travel: 2-7/8" Motor: 1 HP Overall dimensions: 72" x 29" x 51" high Estimated weight: 1120 lbs. Equipped With: 3-jaw chuck Thread dial Factory cabinet stand Flame hardened bed ways Motor reversing switch  Tool holder This item is in very good condition! We can palletize, cover and load this item for an additional fee.  Please inquire.  If you a freight quote for additional fees email the details and destination address/zip code.

Directions

Similar products from Tools for Other Machines

Efem Geometric TOOL HOLDER Threading die chaser Thread 3-3/4" L 5/8" Shank +more

Efem Geometric TOOL HOLDER Threading die chaser Thread 3-3/4" L 5/8" Shank +more

  • Freehold, New Jersey, United States
  • Jun 11th
tapco port-o brake, bender, slitter, saw cutting table aluminum siding lot deal

tapco port-o brake, bender, slitter, saw cutting table aluminum siding lot deal

  • Ardmore, Alabama, United States
  • Jun 11th
LM Finishing Ultrasonic Cleaner / Cleaning Machine Model EX055 8/ Ultrasound

LM Finishing Ultrasonic Cleaner / Cleaning Machine Model EX055 8/ Ultrasound

  • Pawtucket, Rhode Island, United States
  • Jun 11th
L&J 27 Ton OBI Power Press Model #27, AIR CLUTCH & BRAKE

L&J 27 Ton OBI Power Press Model #27, AIR CLUTCH & BRAKE

  • Pawtucket, Rhode Island, United States
  • Jun 11th
Laservall FDL Laser YAG Class IV 808 nm 1064 Only 72 hrs of use! 2 focal heads

Laservall FDL Laser YAG Class IV 808 nm 1064 Only 72 hrs of use! 2 focal heads

  • Gardner, Massachusetts, United States
  • Jun 11th
Harloff 684190 Replacement Vinyl Divider Strip

Harloff 684190 Replacement Vinyl Divider Strip

  • San Diego, California, United States
  • Jun 11th
(3) GREAT Moore Jig Bore Tool Holders Wahlstrom Chuck Micro Boring End Mill

(3) GREAT Moore Jig Bore Tool Holders Wahlstrom Chuck Micro Boring End Mill

  • Freehold, New Jersey, United States
  • Jun 11th
Rivet Holder Screw Holder or Bolt Holder works with Rivet Gun or Rivet Squeezer

Rivet Holder Screw Holder or Bolt Holder works with Rivet Gun or Rivet Squeezer

  • Romulus, Michigan, United States
  • Jun 11th
Please See Details Sievert Industries 3366-97 Promatic Handle

Please See Details Sievert Industries 3366-97 Promatic Handle

  • Las Vegas, Nevada, United States
  • Jun 11th
Oster 1/2 & 3/4 inch pipe dies for 300 series - 12009

Oster 1/2 & 3/4 inch pipe dies for 300 series - 12009

  • Perth Amboy, New Jersey, United States
  • Jun 11th
Hardinge Super Precision Speed Lathe, Model HSL-59 NEW 1989

Hardinge Super Precision Speed Lathe, Model HSL-59 NEW 1989

  • Pawtucket, Rhode Island, United States
  • Jun 9th
Clausing Model 2287 20" Drill Press with Heavy Duty Factory Stand

Clausing Model 2287 20" Drill Press with Heavy Duty Factory Stand

  • Pawtucket, Rhode Island, United States
  • Jun 9th
Sharp CNC Vertical Knee Milling Machine LMV/MP 3 Axis CNC Acu-Rite Control

Sharp CNC Vertical Knee Milling Machine LMV/MP 3 Axis CNC Acu-Rite Control

  • Pawtucket, Rhode Island, United States
  • Jun 9th
Southwestern Industries Trak TRL 1440P CNC Lathe Proto Trak PRO Track LX2 CNC

Southwestern Industries Trak TRL 1440P CNC Lathe Proto Trak PRO Track LX2 CNC

  • Pawtucket, Rhode Island, United States
  • Jun 9th
Standard NO 5 J.A OBI Power Punch Press Straight Side

Standard NO 5 J.A OBI Power Punch Press Straight Side

  • Pawtucket, Rhode Island, United States
  • Jun 9th
Sunnen Precision Horizonal Hone Model # MBB-1600 Serial#: 41977

Sunnen Precision Horizonal Hone Model # MBB-1600 Serial#: 41977

  • Cedarburg, Wisconsin, United States
  • Jun 9th
Malco Hole Cutter HC1 HVAC Made In USA Snappy SM-3 Adjustable Hole Cutter Tool

Malco Hole Cutter HC1 HVAC Made In USA Snappy SM-3 Adjustable Hole Cutter Tool

  • Landis, North Carolina, United States
  • Jun 9th
MA-13025 SOFT SIDED-HARD BOTTOM HVAC TOOL BAG-10 INSIDE AND 14 OUTSIDE POCKETS

MA-13025 SOFT SIDED-HARD BOTTOM HVAC TOOL BAG-10 INSIDE AND 14 OUTSIDE POCKETS

  • Osage Beach, Missouri, United States
  • Jun 9th
Malco FBSN2 Extra Sharp Dual-Barbed 2-1/2-Inch Foamboard Staple

Malco FBSN2 Extra Sharp Dual-Barbed 2-1/2-Inch Foamboard Staple

  • San Jose, United States
  • Jun 9th
3M High Productivity Pad 7300 13" Floor Care Pad 5 units, 1 case

3M High Productivity Pad 7300 13" Floor Care Pad 5 units, 1 case

  • Ormond Beach, Florida, United States
  • Jun 9th

People who viewed this item also vieved

BROWN & SHARPE #60-222 DUAL BIT TOOLING HEADS for AUTOMATIC SCREW MACHINES!!sj

BROWN & SHARPE #60-222 DUAL BIT TOOLING HEADS for AUTOMATIC SCREW MACHINES!!sj

  • Leland, Illinois, United States
  • Jan 30th
SOMMA ACCU-SET CARBIDE INSERT TURNING TOOL ACTT00 5/8" SHANK .625"

SOMMA ACCU-SET CARBIDE INSERT TURNING TOOL ACTT00 5/8" SHANK .625"

  • Ipswich, Massachusetts, United States
  • Jan 30th
SOMMA CHUCK-TYPE ADJUSTABLE DRILL HOLDER 00JC-5

SOMMA CHUCK-TYPE ADJUSTABLE DRILL HOLDER 00JC-5

  • Ipswich, Massachusetts, United States
  • Jan 30th
2 Tap Wrenches G T D #5 y3 & a 1927 Wrench (M)

2 Tap Wrenches G T D #5 y3 & a 1927 Wrench (M)

  • Roxbury, Connecticut, United States
  • Jan 30th
2 Tap Wrenches Little Giant #4 & No 0 y2 (L)

2 Tap Wrenches Little Giant #4 & No 0 y2 (L)

  • Roxbury, Connecticut, United States
  • Jan 30th
2 Tap Wrenches Green River #1 & No Name (Ce

2 Tap Wrenches Green River #1 & No Name (Ce

  • Roxbury, Connecticut, United States
  • Jan 30th
Wire EDM Large Part Fixture

Wire EDM Large Part Fixture

  • Rochester, New York, United States
  • Jan 30th
HITACHI WIRE EDM MACHINE~MODEL 254Y~NEW IN 2000~LOW HOURS~VERY NICE

HITACHI WIRE EDM MACHINE~MODEL 254Y~NEW IN 2000~LOW HOURS~VERY NICE

  • Mount Clemens, Michigan, United States
  • Jan 30th
Sodick MOLD MAKER 5 EDM Machine

Sodick MOLD MAKER 5 EDM Machine

  • Murrieta, California, United States
  • Jan 30th
Used Milwaukee Nibbler 6890 Heavy Duty Electric 16 Gauge

Used Milwaukee Nibbler 6890 Heavy Duty Electric 16 Gauge

  • Lakeland, Florida, United States
  • Jan 30th
New PanaVice Press

New PanaVice Press

  • Albuquerque, New Mexico, United States
  • Jan 30th
~DYNAMIC SEALING TECHNOLOGIES~AIR MANIFOLD for CLIMAX FF6100 #GP-330-RA

~DYNAMIC SEALING TECHNOLOGIES~AIR MANIFOLD for CLIMAX FF6100 #GP-330-RA

  • Maplewood, Ohio, United States
  • Jan 30th
LapMaster 12" Lapping Machine

LapMaster 12" Lapping Machine

  • Morton, Illinois, United States
  • Jan 30th
Magnavon Skin Burnishing Tool Sheet Metal Fabrication Aviation Auto Restore

Magnavon Skin Burnishing Tool Sheet Metal Fabrication Aviation Auto Restore

  • Auburn, Washington, United States
  • Jan 30th
HAMMOND DUAL END PEDESTAL BUFFER POLISHER

HAMMOND DUAL END PEDESTAL BUFFER POLISHER

  • Naperville, Illinois, United States
  • Jan 30th
Sam Ghiringhelli Centerless Grinder - New Old Stock

Sam Ghiringhelli Centerless Grinder - New Old Stock

  • Matawan, New Jersey, United States
  • Jan 30th
DUMORE Tool Post Grinder Model 11-011 USA with Attachments Nice

DUMORE Tool Post Grinder Model 11-011 USA with Attachments Nice

  • East Brunswick, New Jersey, United States
  • Jan 30th
Magnetic Transfer Plate Surface Grinder Machinist Tool G.C.++

Magnetic Transfer Plate Surface Grinder Machinist Tool G.C.++

  • Rome, New York, United States
  • Jan 30th
Mitsubishi RNMG 32 UTi20T Carbide Insert

Mitsubishi RNMG 32 UTi20T Carbide Insert

  • Aumsville, Oregon, United States
  • Jan 30th
Kennametal TNMP432 KC850 Carbide Inserts

Kennametal TNMP432 KC850 Carbide Inserts

  • Aumsville, Oregon, United States
  • Jan 30th
south bend shaper,south bend lathe, square wrench

south bend shaper,south bend lathe, square wrench

  • West Farmington, Ohio, United States
  • Jan 30th
Horizontal Mill Cutter checks .630" W x 3.68" O,D, x 1: I.D,

Horizontal Mill Cutter checks .630" W x 3.68" O,D, x 1: I.D,

  • Bowling Green, Kentucky, United States
  • Jan 30th
4" Kennametal Kenloc2 index-able Shell Mill Cutter KL2 SR4 SN415

4" Kennametal Kenloc2 index-able Shell Mill Cutter KL2 SR4 SN415

  • Bedford, Ohio, United States
  • Jan 30th
milling tool

milling tool

  • Ballwin, Missouri, United States
  • Jan 30th
2001 Kasuga Quantum Q-1000VS Vertical Machining Center (1108)

2001 Kasuga Quantum Q-1000VS Vertical Machining Center (1108)

  • Miami, Florida, United States
  • Jan 30th
DOALL MODEL #16ML VERTICAL BANDSAW (MANSFIELD, OH)

DOALL MODEL #16ML VERTICAL BANDSAW (MANSFIELD, OH)

  • United States
  • Jan 30th
#HBA520AU KASTO 22.7" x 22.7" Horizontal Band Saw w/ Shuttle Feed (New 1998)

#HBA520AU KASTO 22.7" x 22.7" Horizontal Band Saw w/ Shuttle Feed (New 1998)

  • Hauppauge, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies