CNC 200KHz 6 Axis USB Mach3 Card Controller Breakout Interface Board Aluminum, US $165.90 – Picture 0

CNC 200KHz 6 Axis USB Mach3 Card Controller Breakout Interface Board Aluminum, US $165.90 – Picture 1

CNC 200KHz 6 Axis USB Mach3 Card Controller Breakout Interface Board Aluminum, US $165.90 – Picture 2

CNC 200KHz 6 Axis USB Mach3 Card Controller Breakout Interface Board Aluminum, US $165.90 – Picture 3

CNC 200KHz 6 Axis USB Mach3 Card Controller Breakout Interface Board Aluminum, US $165.90 – Picture 4

CNC 200KHz 6 Axis USB Mach3 Card Controller Breakout Interface Board Aluminum, US $165.90 – Picture 5

Cnc 200khz 6 Axis Usb Mach3 Card Controller Breakout Interface Board Aluminum

US $165.90

???, ??? , China
Jan 29th

Open on mobile:
QR code

Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge CNC 200KHz 6 Axis USB Mach3 Card Controller Breakout Interface Board Aluminum Introduction DDSMXV5.0 is designed by our Studio, it is a CNC system based mach3.It’s version is 5.0 now.You do not need to add other Hardware,and you can complete the signal conversion from the G-code to the movement of the stepper motor drive control. This card is compatible with most stepper drives and servo drives. And it is perfect weapon to replace mach3 parallel interface board. DDSMXV5.0 include DDSM3V5.0 ? DDSM4V5.0 ? DDSM5V5.0 ? DDSM6V5.0,they are 3?4?5?6 axes mach3CNC card. These 4 cards use the same Hardware platformDDSMXV5.0.They are limited to 3,4,5,6 axes for different voice of customer .They use the same manual. 1. Simultaneously control 6 stepper motors. 2. With 24 programmable input interface , can be configured to be "limit", "E-stop" and other functions. 3. With 14 programmable output interface, can work with water-cooling or mist-cooling spindle and other devices. 4.. PWM/VSO(0-10V) spindle control mode . 5. USB interface, support MACH3 software. 6. DCDC electrical isolation 7.With maximum 200KHZ stepper motor pulse control output , suitable for most machine system. 8.Dimensions:120*72*20mm 9.Weight:180g Requirements of Computer Basic Configuration: 1)CPU:1GHz; 2)Memory:512MB 3)500MB Available disk space 4)USB 2.0 Recommended configuration: 1)CPU:2GHz Dual Core; 2)Memory:2GB; 3)1G Available disk space 4)USB 2.0 Product feature 1)USB communication interface, and power supply for the board; 2)10 IO input, opto-isolated, It Can be configured to limit the emergency stop and other functions, all of them are 2edg port. 3)14 IO input with no opto-isolated but with iso-IC. This port is set to IDC 2.54mm port. 4)14 IO output with no opto-isolated but with iso-IC. This port is set to IDC 2.54mm port. 5)2IO output with opto-isolated for spindle. 6)up to 6 axes stepper-motor control port. Each port has up to 200KHz plus output; 7)COTEX-M3 of NXP-LPC is main control chip; New feature 8?New design Aluminum shell make the system more stable; 9?This system is equipped with RS2332 manual control box. You can use manual control box with this port. 10?Spindle control port has PWM Mod(0%-100% dutycycle with 12Vpp)and voltage Mod(0-10V). 11?Spindle speed feed back port-INDEX. 12?There is a power autostability system. When USB port overvoltage or undervoltage or within other EMI, this system can make power of system stable. 13?There are High speed interface chips,which make stepper driver signal more stable. 14?There is a USB protection chip,which can protect system within high voltage EMI. Electrical parameters A. System input voltage5V; B. Operating voltage of input interface with no opto-isolated:5V C. Operating voltage of input interface with opto-isolated:12V; D. Operating voltage of output interface:5V; E. stepper motor control signal output voltage:5V; Spindle Signal:10V. Package included: 1 X 200KHz 6 Axis USB Mach3 Card 1 x USB Cable 1 x CD inkfrog terapeak i000000