+ Post new Ad
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 0
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 1
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 2
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 3
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 0
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 1
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 2
CNC MILLIN MACHINE RetroFit Read to Run, US $9,000.00 – Picture 3

Cnc Millin Machine Retrofit Read To Run

US $9,000.00

  • Olympia, Washington, United States
  • Jan 30th
Open on mobile:
QR code
 Nice Hurco /MachMotion Conversion Machine is set up to run 1 or 3 phase.  I will load at no charge and can crate for shipping for an additional fee. PLEASE note the machine is in the process of being thoroughly cleaned and detailed.  I will post a link to a running demo tomorrow This machine has a complete Mach-motion Retrofit including new AC servo and drives, I integrated inverter spindle drive. Machine must be picked up in person or I will prepare and load on Common Carrier.  Machine must be paid for in full Prior to shipping Personal Inspection is preferred but I will post a YouTube video cutting a sample part.  I can also provide part programing for a fee to help you get up and running. Payment by Cash, Check, or certified funds or by wire transfer.  No PayPal unless you are willing to pay the additional fees and release the funds before the machine is loaded. Machine Specs TABLE SIZE: 49" X 14" X-24" Y-14" Z-6" KNEE TRAVEL 15-1/2" 5 HP Inverter controlled Spindle controlled from within MachMotion Control. Machine weight 4,000 lbs Paint in Good Condition Front and rear way covers order and will be replaced. $500.00 Paypal Deposit required within 24 Hours of Purchase If shipped by Flat Bed I will wrap and tarp and mount on a pallet for shipping. This item is marked Local Pick up I will once the item is paid for put on a pallet and load onto your carrier at no charge. If crating is required I will do so at an additional fee.  Balance of payment must be paid in full before the machine will ship. 
Condition Seller refurbished :
An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes “Retro fitted Hurco mill with box ways Good Overall Condition with complete Mach Motion Control retrofit.”

Directions

Similar products from Tools for Milling Machines

machine ball crank handle, 5/8 bore

machine ball crank handle, 5/8 bore

  • Urbana, Illinois, United States
  • Jan 30th
1 NEW ISCAR MULTI-MASTER BIT MM GRIT 22K-4.75-0.20 52E

1 NEW ISCAR MULTI-MASTER BIT MM GRIT 22K-4.75-0.20 52E

  • Wadley, Alabama, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #2 8P 55-134T 1"bore Brown And Sharpe

USED INVOLUTE GEAR CUTTER #2 8P 55-134T 1"bore Brown And Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI

  • Hartland, Wisconsin, United States
  • Jan 30th
1 NEW ISCAR MULTI-MASTER BIT MM EB500A37-4T08908

1 NEW ISCAR MULTI-MASTER BIT MM EB500A37-4T08908

  • Wadley, Alabama, United States
  • Jan 30th
Bridgeport Vertical Mill Head Adapter

Bridgeport Vertical Mill Head Adapter

  • Chouteau, Oklahoma, United States
  • Jan 30th
Escomatic Screw Machine Feed Roll Nuts M14x1mm Thread (#6)

Escomatic Screw Machine Feed Roll Nuts M14x1mm Thread (#6)

  • Northport, New York, United States
  • Jan 30th
SWIVEL BASE for 6" MILLING MACHINE VISE vertical mill work holder tool

SWIVEL BASE for 6" MILLING MACHINE VISE vertical mill work holder tool

  • Milroy, Indiana, United States
  • Jan 30th
6mm Shank MINI T TYPE LATHE PARTING TOOL Cut Off Blade Fits Emco Unimat lathe

6mm Shank MINI T TYPE LATHE PARTING TOOL Cut Off Blade Fits Emco Unimat lathe

  • Sheffield, United Kingdom
  • Jan 30th
VALENITE FACE MILL VHF30BD0394K10R

VALENITE FACE MILL VHF30BD0394K10R

  • Wadley, Alabama, United States
  • Jan 30th
NICE! TSUDAKOMA 4TH-AXIS 9" ROTARY TABLE W/ TSUDAKOMA TAILSTOCK

NICE! TSUDAKOMA 4TH-AXIS 9" ROTARY TABLE W/ TSUDAKOMA TAILSTOCK

  • La Puente, California, United States
  • Jan 30th
LOT OF 5 HSS STAGGERED TOOTH MILLING CUTTERS 2-3/4" TO 3" W/ 1" BORE NIAGARA

LOT OF 5 HSS STAGGERED TOOTH MILLING CUTTERS 2-3/4" TO 3" W/ 1" BORE NIAGARA

  • Ellington, New York, United States
  • Jan 30th
LOT OF TWO BACK SPOT FACERS AND ONE COUNTERBORE WITH THREE 3MT ARBORE SHANKS

LOT OF TWO BACK SPOT FACERS AND ONE COUNTERBORE WITH THREE 3MT ARBORE SHANKS

  • Ellington, New York, United States
  • Jan 30th
SWIVEL ROTATING CROSS SLIDE ATTACHMENT FOR UNIVERSAL GRINDER SHARPENER

SWIVEL ROTATING CROSS SLIDE ATTACHMENT FOR UNIVERSAL GRINDER SHARPENER

  • La Puente, California, United States
  • Jan 30th
9" South Bend Lathe CARRIAGE STOP WITH INDICATOR

9" South Bend Lathe CARRIAGE STOP WITH INDICATOR

  • New Britain, Connecticut, United States
  • Jan 30th
READY TOOL LIVE CENTER HEAVY DUTY BEARING 1/2 STRAIGHT SHANK GRINDING MACHINES

READY TOOL LIVE CENTER HEAVY DUTY BEARING 1/2 STRAIGHT SHANK GRINDING MACHINES

  • New Britain, Connecticut, United States
  • Jan 30th
16" SOUTH BEND LATHE TURRET ROYAL

16" SOUTH BEND LATHE TURRET ROYAL

  • New Britain, Connecticut, United States
  • Jan 30th
USED BRIDGEPORT MILLING MACHINE R8 SPINDLE

USED BRIDGEPORT MILLING MACHINE R8 SPINDLE

  • New Britain, Connecticut, United States
  • Jan 30th
J HEAD BRIDGEPORT MILLING MACHINE HEAD BOLT SET one set

J HEAD BRIDGEPORT MILLING MACHINE HEAD BOLT SET one set

  • New Britain, Connecticut, United States
  • Jan 30th
BRIDGEPORT j head MILLING MACHINE KNEE ELAVATEING SCREW knee

BRIDGEPORT j head MILLING MACHINE KNEE ELAVATEING SCREW knee

  • New Britain, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

ORIGINAL RARE SOUTH BEND 9" METAL LATHE TURRET TAILSTOCK ASSEMBLY 6 POSITION

ORIGINAL RARE SOUTH BEND 9" METAL LATHE TURRET TAILSTOCK ASSEMBLY 6 POSITION

  • Holmdel, New Jersey, United States
  • Mar 3rd
SEARS CRAFTSMAN LATHE COUNTERSHAFT MANDREL PULLEY BEARING SETUP

SEARS CRAFTSMAN LATHE COUNTERSHAFT MANDREL PULLEY BEARING SETUP

  • Golden, Colorado, United States
  • Mar 3rd
T Nut for Atlas Craftsman 6" Lathes. Tapped for 1/4-28 Thread

T Nut for Atlas Craftsman 6" Lathes. Tapped for 1/4-28 Thread

  • Genoa, Illinois, United States
  • Mar 3rd
GRS TOOLS GRAVERSMITH JEWELRY HAND ENGRAVING SYSTEM 2 YEAR WARRANTY NIB 004-895

GRS TOOLS GRAVERSMITH JEWELRY HAND ENGRAVING SYSTEM 2 YEAR WARRANTY NIB 004-895

  • Mission Viejo, California, United States
  • Mar 12th
GRS TOOLS GRAVERMAX G8 JEWELRY HAND ENGRAVING SYSTEM 2 YEAR WARRANTY NIB 004-995

GRS TOOLS GRAVERMAX G8 JEWELRY HAND ENGRAVING SYSTEM 2 YEAR WARRANTY NIB 004-995

  • Mission Viejo, California, United States
  • Mar 12th
GRS TOOLS GRAVERMACH AT JEWELRY HAND ENGRAVING SYSTEM 2 YR WARRANTY NIB 004-965

GRS TOOLS GRAVERMACH AT JEWELRY HAND ENGRAVING SYSTEM 2 YR WARRANTY NIB 004-965

  • Mission Viejo, California, United States
  • Mar 12th
MACHINIST LATHE MILL 5C 5 C Collet Grinding ? Fixture

MACHINIST LATHE MILL 5C 5 C Collet Grinding ? Fixture

  • Morris Plains, New Jersey, United States
  • Mar 24th
Pair Vintage MACHINIST SETUP BEAMS BLOCKS PARALLELS GRINDING MILL INSPECTION

Pair Vintage MACHINIST SETUP BEAMS BLOCKS PARALLELS GRINDING MILL INSPECTION

  • Saint Regis Falls, New York, United States
  • Mar 24th
4 Vintage MACHINIST SETUP I BEAMS BLOCKS PARALLELS GRINDING MILL INSPECTION

4 Vintage MACHINIST SETUP I BEAMS BLOCKS PARALLELS GRINDING MILL INSPECTION

  • Saint Regis Falls, New York, United States
  • Mar 24th
Scully Jones 1-1/4" Hand Tap Driver #4 MT

Scully Jones 1-1/4" Hand Tap Driver #4 MT

  • Flint, Michigan, United States
  • Mar 29th
7/16 and 1/2 inch taps USA and Sweden NF NC

7/16 and 1/2 inch taps USA and Sweden NF NC

  • Hatley, Wisconsin, United States
  • Mar 29th
1/4, 5/16, and 3/8 inch taps USA and Sweden NF NC

1/4, 5/16, and 3/8 inch taps USA and Sweden NF NC

  • Hatley, Wisconsin, United States
  • Mar 29th
#9442: Famco 6? 14ga Mechanical Shear Fabrication Equipment Used

#9442: Famco 6? 14ga Mechanical Shear Fabrication Equipment Used

  • Orange City, Iowa, United States
  • May 28th
#GHL-0420 ADIRA 80" x 5/32" Hydraulic Power Shear (New 1995)

#GHL-0420 ADIRA 80" x 5/32" Hydraulic Power Shear (New 1995)

  • Hauppauge, New York, United States
  • May 29th
lockformer flanger

lockformer flanger

  • Cuba, New York, United States
  • May 29th
1 NOS SUNNEN T20-J15 HONING STONE SET

1 NOS SUNNEN T20-J15 HONING STONE SET

  • Canada, Canada
  • May 24th
1 NOS SUNNEN N37-A45 HONING STONE SET

1 NOS SUNNEN N37-A45 HONING STONE SET

  • Canada, Canada
  • May 24th
1 NOS SUNNEN T20-J17 HONING STONE SET

1 NOS SUNNEN T20-J17 HONING STONE SET

  • Canada, Canada
  • May 24th
Mecatool Wire EDM Tooling V-Block C596950 75x75mm Max Stainless Holder C 596 950

Mecatool Wire EDM Tooling V-Block C596950 75x75mm Max Stainless Holder C 596 950

  • Oconomowoc, Wisconsin, United States
  • May 25th
NEW OEM A087 MITSUBISHI .013" WIRE EDM .335mm DIAMOND GUIDE

NEW OEM A087 MITSUBISHI .013" WIRE EDM .335mm DIAMOND GUIDE

  • Oconomowoc, Wisconsin, United States
  • May 25th
Mitsubishi Wire EDM Ceramic Pinch & Capstan Roller FA, MED Part # M2040 M2041

Mitsubishi Wire EDM Ceramic Pinch & Capstan Roller FA, MED Part # M2040 M2041

  • Oconomowoc, Wisconsin, United States
  • May 25th
Cold Saw Pedrazzoli Super Brown 350 60MP Variable Speed

Cold Saw Pedrazzoli Super Brown 350 60MP Variable Speed

  • Temecula, California, United States
  • May 25th
Large 36"x96" Steel Welding Fabricating Layout Table Frame 4000lbs

Large 36"x96" Steel Welding Fabricating Layout Table Frame 4000lbs

  • Millstadt, Illinois, United States
  • May 25th
Master Cut band saw

Master Cut band saw

  • Fort Lauderdale, Florida, United States
  • May 25th
HARDINGE #23 FEED FINGER 1-3/4" ROUND STK 4300

HARDINGE #23 FEED FINGER 1-3/4" ROUND STK 4300

  • Wadley, Alabama, United States
  • May 27th
Hardinge 3/8 collet

Hardinge 3/8 collet

  • Waukegan, Illinois, United States
  • May 27th
Lot of 4 Acme-Gridley Screw Machine spindle change gear shaft

Lot of 4 Acme-Gridley Screw Machine spindle change gear shaft

  • Oxnard, California, United States
  • May 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies