+ Post new Ad
CNC Stop, US $35.00 – Picture 0
CNC Stop, US $35.00 – Picture 0

Cnc Stop

US $35.00

  • Kailua Kona, Hawaii, United States
  • Jan 30th
Open on mobile:
QR code
This a special stop design for a CNC machine. It locks to the table in the T slots. It has cam locking mechanisms on both the base and the top pivot bar. 6 inch 3/4 shaft with an adjustable 1/4 stop .Other Multi Position stops go for well over $100.00. I'll throw in a regular vise stop too. The bolt on top stop has a turn stop for multiple positioning. This price doesn't even come close to time and material and design.Will combine shipments to save on shipping costs for a couple dollars more.

Directions

Similar products from Other Workholding Tools

Brown & Sharpe 599-673-20 Adjustable Parallel Set

Brown & Sharpe 599-673-20 Adjustable Parallel Set

  • Jamaica, New York, United States
  • Jan 30th
Clamp, Vintage JORGENSEN No. 108, (8" C'Clamp), Made in the USA

Clamp, Vintage JORGENSEN No. 108, (8" C'Clamp), Made in the USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
8 PIECE ER32 ER 32 TOOL HOLDING COLLETS 5/16" TO 3/4" APPROXIMATE RANGE (2

8 PIECE ER32 ER 32 TOOL HOLDING COLLETS 5/16" TO 3/4" APPROXIMATE RANGE (2

  • La Puente, California, United States
  • Jan 30th
Halogen Machine Light/Lamp Flex-Shaft-NEW

Halogen Machine Light/Lamp Flex-Shaft-NEW

  • Chino, California, United States
  • Jan 30th
VINTAGE STERLING FENCE WIRE AND HOLDER NEAR 10 POUNDS

VINTAGE STERLING FENCE WIRE AND HOLDER NEAR 10 POUNDS

  • Franklin, North Carolina, United States
  • Jan 30th
20' Twin torque hose set. 40,000 PSI. With T-630 Enerpac quick couplers sets

20' Twin torque hose set. 40,000 PSI. With T-630 Enerpac quick couplers sets

  • Heber City, Utah, United States
  • Jan 30th
TABLE SAW PLATFORM/ METAL/ USED

TABLE SAW PLATFORM/ METAL/ USED

  • Plymouth, Pennsylvania, United States
  • Jan 30th
MITEE BITE TSN-625 SET OF 2 USED VERY GOOD CONDITION

MITEE BITE TSN-625 SET OF 2 USED VERY GOOD CONDITION

  • Perrysburg, Ohio, United States
  • Jan 30th
Tweezers

Tweezers

  • Kailua Kona, Hawaii, United States
  • Jan 30th
Quill Stops and Vise Stops

Quill Stops and Vise Stops

  • Kailua Kona, Hawaii, United States
  • Jan 30th
AIrcraft/Aviation Tools 78 Wedgelock Clecos1/8", 5/32", 3/16" Cylindrical Cleco

AIrcraft/Aviation Tools 78 Wedgelock Clecos1/8", 5/32", 3/16" Cylindrical Cleco

  • San Antonio, Texas, United States
  • Jan 30th
IGP Baverelli FE-160-0310-1 Diamond Glass Cup Wheel BAV.VR1114 Position 1

IGP Baverelli FE-160-0310-1 Diamond Glass Cup Wheel BAV.VR1114 Position 1

  • Milpitas, California, United States
  • Jan 30th
Glaston Bavelloni 19513000025 Diamond Glass Cup Wheel 130x39xJ40 MB005 W10

Glaston Bavelloni 19513000025 Diamond Glass Cup Wheel 130x39xJ40 MB005 W10

  • Milpitas, California, United States
  • Jan 30th
Glaston Bavelloni 19415000163 Diamond Glass Cup Wheel 150x41xJ40 M1131 W8

Glaston Bavelloni 19415000163 Diamond Glass Cup Wheel 150x41xJ40 M1131 W8

  • Milpitas, California, United States
  • Jan 30th
SIMPLEX 1X6 SCREW JACK

SIMPLEX 1X6 SCREW JACK

  • Waterford, Michigan, United States
  • Jan 30th
KWM Metric Transposing Gear Set for South Bend 9A or 10K Lathe

KWM Metric Transposing Gear Set for South Bend 9A or 10K Lathe

  • Owosso, Michigan, United States
  • Jan 30th
Machinists 11/25BUY NOW USA Famous Heimann Transfer Set 1/2 -13

Machinists 11/25BUY NOW USA Famous Heimann Transfer Set 1/2 -13

  • Lutz, Florida, United States
  • Jan 30th
MAGSWITCH 90 DEGREE ANGLE (550 lbs) ***Only 2 remaining***

MAGSWITCH 90 DEGREE ANGLE (550 lbs) ***Only 2 remaining***

  • Canonsburg, Pennsylvania, United States
  • Jan 30th
HUOT CNC Tool Holder Cart Transport “ToolScoot” 40 Taper, Made In USA, Holds 48

HUOT CNC Tool Holder Cart Transport “ToolScoot” 40 Taper, Made In USA, Holds 48

  • Murfreesboro, Tennessee, United States
  • Jan 30th
Industrial Lifting Magnets

Industrial Lifting Magnets

  • Vancouver, Washington, United States
  • Jan 30th

People who viewed this item also vieved

CUSTOM PNUEMATIC WORK HOLDING FIXTURE W/ CLAMP & VALVE

CUSTOM PNUEMATIC WORK HOLDING FIXTURE W/ CLAMP & VALVE

  • Ellington, New York, United States
  • Jun 4th
WATCHMAKER ANGLE PLATE MACHINIST TOOLMAKER HARDENED GRIND FIXTURE tapped

WATCHMAKER ANGLE PLATE MACHINIST TOOLMAKER HARDENED GRIND FIXTURE tapped

  • Hadley, Pennsylvania, United States
  • Jun 4th
22" MAGNETIC BLOCK

22" MAGNETIC BLOCK

  • California, United States
  • Jun 4th
USED USA LATHE DEAD CENTER with 1.00" POINT DIAMETER (5/8" x 18 threaded mount)

USED USA LATHE DEAD CENTER with 1.00" POINT DIAMETER (5/8" x 18 threaded mount)

  • Fairfield, Iowa, United States
  • Jun 4th
Skoda #5 Morse Taper Live Center 5-CSN243324

Skoda #5 Morse Taper Live Center 5-CSN243324

  • Johnson City, New York, United States
  • Jun 4th
DESMOND Huntington Type Dresser Capacity: 16'' to 36'' Model #: 2 Face: 1-1/2''

DESMOND Huntington Type Dresser Capacity: 16'' to 36'' Model #: 2 Face: 1-1/2''

  • Duncan, South Carolina, United States
  • Jun 4th
De-Sta-Co DE-STA-CO 2002-UR Vertical Hold-Down Action Clamp

De-Sta-Co DE-STA-CO 2002-UR Vertical Hold-Down Action Clamp

  • USA, United States
  • Jun 7th
T-Slot Bolts, 7 Pcs, 5/8-11 Tpi, 5 1/2" Long, T Bolts, With Washer + Nut

T-Slot Bolts, 7 Pcs, 5/8-11 Tpi, 5 1/2" Long, T Bolts, With Washer + Nut

  • Wood Dale, Illinois, United States
  • Jun 7th
T-Slot Bolts, 5 Pcs, 5/8-11 Tpi, 6" Long, T Bolts, With Washer + Nut

T-Slot Bolts, 5 Pcs, 5/8-11 Tpi, 6" Long, T Bolts, With Washer + Nut

  • Wood Dale, Illinois, United States
  • Jun 7th
Spin index type PF70-5C

Spin index type PF70-5C

  • San Bernardino, California, United States
  • Jun 7th
HARDINGE 16C .242 ROUND COLLET STK 8364

HARDINGE 16C .242 ROUND COLLET STK 8364

  • Wadley, Alabama, United States
  • Jun 7th
HARDINGE 3J 1-1/8" ROUND COLLET NO INTERNAL THREADS STK 8359

HARDINGE 3J 1-1/8" ROUND COLLET NO INTERNAL THREADS STK 8359

  • Wadley, Alabama, United States
  • Jun 7th
PBA 1023500 10' 3 JAW PLAIN BACK SCROLL CHUCK

PBA 1023500 10' 3 JAW PLAIN BACK SCROLL CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
PBA 823500 8' 3 JAW PLAIN BACK SCROLL CHUCK

PBA 823500 8' 3 JAW PLAIN BACK SCROLL CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
PBA 614420 6' 4 JAW D-3 INDEPENDENT LATHE CHUCK

PBA 614420 6' 4 JAW D-3 INDEPENDENT LATHE CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
Central Forge 6" Economy Carpenter Vise With Clamp Model # 95203

Central Forge 6" Economy Carpenter Vise With Clamp Model # 95203

  • Littleton, Colorado, United States
  • Jun 9th
NEW 5 C Collet Stop Adjustable FITS ALL COLLET CHUCKS

NEW 5 C Collet Stop Adjustable FITS ALL COLLET CHUCKS

  • Columbus, Ohio, United States
  • Jun 9th
NEW 2 PC Quick Clamp Mill Vise 8" Jaw Width

NEW 2 PC Quick Clamp Mill Vise 8" Jaw Width

  • Columbus, Ohio, United States
  • Jun 9th
"Let's Love Beer Counted Cross Stitch Kit-7.75""X10"" 14 Count"

"Let's Love Beer Counted Cross Stitch Kit-7.75""X10"" 14 Count"

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Fons & Porter Fussy Cut Templates-Squares

Fons & Porter Fussy Cut Templates-Squares

  • Hickory Hills, Illinois, United States
  • Jun 23rd
"Nova Platina Straight Needles Set 10""-"

"Nova Platina Straight Needles Set 10""-"

  • Hickory Hills, Illinois, United States
  • Jun 23rd
SPI 20-682-1 - .130-.230 .001GRAD HOLE GAGE

SPI 20-682-1 - .130-.230 .001GRAD HOLE GAGE

  • Glenview, Illinois, United States
  • Oct 21st
Machinist Work Holding Set Up V Block 2 1/2" x 2" x 2"

Machinist Work Holding Set Up V Block 2 1/2" x 2" x 2"

  • Youngstown, Ohio, United States
  • Oct 21st
STARRETT NO. 567 TOOLMAKERS V-BLOCK COMPLETE W/CLAMP

STARRETT NO. 567 TOOLMAKERS V-BLOCK COMPLETE W/CLAMP

  • Tulsa, Oklahoma, United States
  • Oct 22nd
rotary table for endmill - used

rotary table for endmill - used

  • Baltimore, Maryland, United States
  • Nov 2nd
4" Inches(100 mm) 4 Jaw Independent Chuck for Lathe Machine

4" Inches(100 mm) 4 Jaw Independent Chuck for Lathe Machine

  • New Delhi, Delhi, India
  • Nov 2nd
5" Inches(125 mm) 4 Jaw Independent Chuck for Lathe Machine & HV6 Rotary Table

5" Inches(125 mm) 4 Jaw Independent Chuck for Lathe Machine & HV6 Rotary Table

  • New Delhi, Delhi, India
  • Nov 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies