vise 4 inch for sale, brand-new and used.

Maxtech 16014MX Vise-Mate EXTENDER Tool Items included in this auction are: Made of Hardened Steel and very tough Glass Filled Nylon

5" Drill Press Vise Features: eliminates need for special and expensive jigs and fixtures provides maximum clamping and holding power steel jaw faces cold rolled steel screws swivel crank handles drops out of way jaw with 5", jaw depth 1", jaw opening 4" jaws are replaceable and interchangeable

UP for sale is a handle for a Bridgeport vise handle, the square is 3/4 , the handle is about 9 inch long, please notice the handle has a bend to it, works fine. Shipping is set at 5.95 , i will cover the extra cost above that USA sales only

This is a Vintage Ridge ( predecessor to Ridgid ) 4" utility bench vise. Opens 5 inches with screw still fully engaged, can go more. Very minor wear, sat on a shelf for many years.

QUALITY USED  PRENTISS 254 1/2 264 1/2 WITH OLD NO.515 4 1/2 INCH JAW HEAVY DUTY BENCH VISE.ALL ORIGINAL WORKS PERFECTLY.PREVIOUS OWNER SOLDERD IS NAME ON JAW.THERE IS SURFACE WARE FROM AGE.THIS ViSE WEIGHS FIFTY LBS AND IS AS PICTURED.THE

***NEW, NEVER USED*** 3" CROSS SLIDE DRILL PRESS VISE BGBV7875 Product Description

Nice unused pair/set of solid brass, 4 inch vise jaws. If you have any questions regarding this listing please message me. For your shipping assurances, all shipped packages have Delivery Confirmation.

var itemNumber = window.ebayItemID ?

This is a old vintage Wilton bullet vise with 3 and 1/2 inch jaws , think its a 1976 , 6 1/2 inch wide opening , 14 1/2 inches long closed and 5 and 3/4 inches tall , approx. 36 lbs. , will ship in a crate , shipping cost may be cheaper if possible , will refund some money if possible , ask any questions and thanks for looking.

This is a old vintage Wilton bullet vise with 4 and 1/2 inch jaws , think its a 1945 , 6 inch wide opening , 14 1/2 inches long closed and 5 and 3/4 inches tall , approx. 36 lbs. , there is NO casting numbers on the outside , all it says is chicago ill wilton , the only stamp is in the key way which is " 4 - 945 " , will ship in a crate , shipping cost may be cheaper if possible , will refund some money if possible , ask any questions and thanks for looking.

Reed 204 Vise, 4 Inch Jaws, Swivel Base, Smooth Jaws Up for sale is a Reed 204 vise with 4 inch jaws and a swivel base. I think it dates to before WWII. When I got this vise it was covered in a bad sage green paint job that covered both the handles and the slide.

4 Inch Cast Iron Drill Press Vise Hand Tools Clamp Holder Machine Work Bench Product Description: When you need your work piece gripped tightly to your table top, WEN Products offers you a 4-inch Cast Iron Drill Press Vise that seals woods, metals, plastics and other materials, holding work pieces firmly in place for safe and accurate drilling. The heavy cast iron base along with the 4 onboard mounting slots provide

An excellent, used, Jacob No.100 4 inch machinist cross slide vise. Looks well cared for & guaranteed to be working properly. Combined shipping available.

This is a nice, used Wilton 4 inch vise in good condition. It has a stationary base and vise tilts up to probably 160 degrees. Vise works good but is missing one of the pair of teeth that attach to the jaws ( these can be ordered).

Iron Parrot Vise 360 Degree Swivel Mechanism Lay Vise Flat Jaw Holes Woodwoker Iron Parrot Vise Product Description: This unique Iron Parrot Vise swivels a full 360-degrees and then locks in place when the jaw is tightened. This handy Iron Parrot Vise can be used in nearly any position for a range of applications. Capable of clamping in the upright position, side-to-side or at any angle.

Parker 954 Vise, 4 Inch Jaws, Fixed Base Up for sale is a Parker 954 vise with 4 inch jaws. When I got this vise I thoroughly cleaned, stripped, and inspected the vise and found no cracks. I then gave it a though wire brushing to remove all the surface rust.