+ Post new Ad
Collet Holder Cutter Equipment TIR0.005mm Toolholding Accessory BT40 CNC, US $72.24 – Picture 0
Collet Holder Cutter Equipment TIR0.005mm Toolholding Accessory BT40 CNC, US $72.24 – Picture 0

Collet Holder Cutter Equipment Tir0.005mm Toolholding Accessory Bt40 Cnc

US $72.24

  • suzhou, China
  • Jul 15th
Open on mobile:
QR code
Product Description Collet Holder Cutter Equipment TIR0.005mm Toolholding Accessory BT40 CNC Item Details:    *100% brand new and high quality *Made of high quality material, durable and practical to use *New precision BT40 ER40 70 chuck clamp for CNC equipment *Hardened and precise ground. *Maximum 25,000 rpm, no further balance required *Metric Length: 70MM *Tie Rod (T): M16 X 2P *Material: Alloy Steel *DIN6499B & Accuracy: 0.01 (0.0004") Runout Tolerance. *Applicable to all ER40 Package Contents:   1*Spring Collet   Note:    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data. Payment We accept payment via Paypal only. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. Delivery details   We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.   Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.    It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.   Contact us   We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded
Metric Length: 70MM
MPN Does Not Apply
Tie Rod (T): M16 X 2P
Package Contents 1*Spring Collet
Material: Alloy Steel
Country/Region of Manufacture China
UPC Does not apply

Directions

Similar products from Other Workholding Tools

Revolving Centre MT3 Shank with 4 Jaw 65 mm Chuck Mounting for Lathe's Tailstock

Revolving Centre MT3 Shank with 4 Jaw 65 mm Chuck Mounting for Lathe's Tailstock

  • DELHI, DELHI, India
  • Jul 16th
LYNDEX-NIKKEN E32-511 Collet,ER32,13mmin

LYNDEX-NIKKEN E32-511 Collet,ER32,13mmin

  • Buffalo Grove, Illinois, United States
  • Jul 15th
LYNDEX-NIKKEN E20-032 Collet,ER20,1/2in

LYNDEX-NIKKEN E20-032 Collet,ER20,1/2in

  • Buffalo Grove, Illinois, United States
  • Jul 15th
LYNDEX-NIKKEN 300-096 Collet,3J,1-1/2in

LYNDEX-NIKKEN 300-096 Collet,3J,1-1/2in

  • Buffalo Grove, Illinois, United States
  • Jul 15th
LYNDEX-NIKKEN 100-006 Collet,100TG,3/32in

LYNDEX-NIKKEN 100-006 Collet,100TG,3/32in

  • Buffalo Grove, Illinois, United States
  • Jul 15th
TE-CO 53506X Plunger,Spring W/Out Lock,1/2-13,3/4,PK5

TE-CO 53506X Plunger,Spring W/Out Lock,1/2-13,3/4,PK5

  • Buffalo Grove, Illinois, United States
  • Jul 15th
Irwin 1964720 Clamp/Spreader (24")

Irwin 1964720 Clamp/Spreader (24")

  • Edmond, Oklahoma, United States
  • Jul 15th
ECLIPSE EMV3 Traditional Angle Vice Plates 4"

ECLIPSE EMV3 Traditional Angle Vice Plates 4"

  • Buffalo Grove, Illinois, United States
  • Jul 15th
Westward 19T327 Clamping Kit,7/16,3/8-16 Stud,54 Pcs

Westward 19T327 Clamping Kit,7/16,3/8-16 Stud,54 Pcs

  • United States, United States
  • Jul 15th
Te-Co 20415 Clamping Kit,11/16,5/8-11 Stud,52 Pcs

Te-Co 20415 Clamping Kit,11/16,5/8-11 Stud,52 Pcs

  • United States, United States
  • Jul 15th
Abbott Workholding Products Ktt10s Soft Top Jaw Set,Steel,12Mm,Pk3

Abbott Workholding Products Ktt10s Soft Top Jaw Set,Steel,12Mm,Pk3

  • United States, United States
  • Jul 15th
De-Sta-Co 82L2g-203B800 Pneumatic Clamp,82L2g W/Sensor,660 In-Lb

De-Sta-Co 82L2g-203B800 Pneumatic Clamp,82L2g W/Sensor,660 In-Lb

  • United States, United States
  • Jul 15th
Mitee-Bite Products Inc 31300 Fixture Clamp,Id Xpansn#5,5/8-11,1-3/4In

Mitee-Bite Products Inc 31300 Fixture Clamp,Id Xpansn#5,5/8-11,1-3/4In

  • United States, United States
  • Jul 15th
Clamps. 1-3/4-inch X 2-3/8-inch 4-pack 19686 Big Horn Miter

Clamps. 1-3/4-inch X 2-3/8-inch 4-pack 19686 Big Horn Miter

  • Vero Beach, Florida, United States
  • Jul 15th
OSBORNE WOOD PRODUCTS, INC. 1429W 34 1/2 x 5 Roped Island Leg in Black Walnut

OSBORNE WOOD PRODUCTS, INC. 1429W 34 1/2 x 5 Roped Island Leg in Black Walnut

  • Buffalo Grove, Illinois, United States
  • Jul 14th
OSBORNE WOOD PRODUCTS, INC. 1509A 40 1/2 x 5 Wilmington Bar Top Island Leg in

OSBORNE WOOD PRODUCTS, INC. 1509A 40 1/2 x 5 Wilmington Bar Top Island Leg in

  • Buffalo Grove, Illinois, United States
  • Jul 14th
OSBORNE WOOD PRODUCTS, INC. 2711P-CHR 35 1/2 x 3 1/2 Electra Fusion Leg in Pine

OSBORNE WOOD PRODUCTS, INC. 2711P-CHR 35 1/2 x 3 1/2 Electra Fusion Leg in Pine

  • Buffalo Grove, Illinois, United States
  • Jul 14th
OSBORNE WOOD PRODUCTS, INC. 2706MH-GMG 35 1/2 x 3 1/2 Conway Fusion Leg in

OSBORNE WOOD PRODUCTS, INC. 2706MH-GMG 35 1/2 x 3 1/2 Conway Fusion Leg in

  • Buffalo Grove, Illinois, United States
  • Jul 14th
OSBORNE WOOD PRODUCTS, INC. 2702H-CHR 35 1/2 x 3 1/2 Walton Vanity Leg in

OSBORNE WOOD PRODUCTS, INC. 2702H-CHR 35 1/2 x 3 1/2 Walton Vanity Leg in

  • Buffalo Grove, Illinois, United States
  • Jul 14th
OSBORNE WOOD PRODUCTS, INC. 7600O 6 1/4 x 4 1/4 x 1/2 Ribbon Applique Left in

OSBORNE WOOD PRODUCTS, INC. 7600O 6 1/4 x 4 1/4 x 1/2 Ribbon Applique Left in

  • Buffalo Grove, Illinois, United States
  • Jul 14th

People who viewed this item also vieved

Brown and Sharpe 750 B V Block, with clamp. VGC.

Brown and Sharpe 750 B V Block, with clamp. VGC.

  • Bryan, Ohio, United States
  • Jan 30th
Starrett 568C V Blocks

Starrett 568C V Blocks

  • Pittsburgh, Pennsylvania, United States
  • Jan 30th
Brown & Sharpe magnetic V-block 750-D

Brown & Sharpe magnetic V-block 750-D

  • Addison, Illinois, United States
  • Jan 30th
35 Mill Taper Interchangable Tip Dead Center Set Fits Cinturn Cin-Turn

35 Mill Taper Interchangable Tip Dead Center Set Fits Cinturn Cin-Turn

  • Flint, Michigan, United States
  • Jan 30th
35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646479

35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646479

  • Flint, Michigan, United States
  • Jan 30th
35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646473

35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646473

  • Flint, Michigan, United States
  • Jan 30th
Vintage Almond Co Machinist Drill Chuck 40-62

Vintage Almond Co Machinist Drill Chuck 40-62

  • Elmhurst, Illinois, United States
  • Jan 30th
PHASE II 3 Jaw Direct Mounting Series Chuck - CHUCK SIZE: 6"

PHASE II 3 Jaw Direct Mounting Series Chuck - CHUCK SIZE: 6"

  • Tucson, Arizona, United States
  • Jan 30th
Chicago Pneumatic 3/8" Square Drive Ratchet Wrench RP9429

Chicago Pneumatic 3/8" Square Drive Ratchet Wrench RP9429

  • Detroit, Michigan, United States
  • Jan 30th
Ultraweld thermoldweld Mold Handle Clamp set of two

Ultraweld thermoldweld Mold Handle Clamp set of two

  • Yulee, Florida, United States
  • Jan 30th
Camlok CH4/L Heavy Duty Horizontal Plate Clamp NEW

Camlok CH4/L Heavy Duty Horizontal Plate Clamp NEW

  • Wainfleet, Ontario, Canada
  • Jan 30th
Oz Gedney Conduit 4- C Clamp CBC-2 (4 pcs)

Oz Gedney Conduit 4- C Clamp CBC-2 (4 pcs)

  • Saint Augustine, Florida, United States
  • Jan 30th
PF70-5C Collet Rotary Indexer Fixture SPIN INDEX NEW

PF70-5C Collet Rotary Indexer Fixture SPIN INDEX NEW

  • Santa Clarita, California, United States
  • Jan 30th
USED NMTB-50 TAPER TG200 COLLET CHUCK NMTB50 x TG-200 x 4.00"Gage

USED NMTB-50 TAPER TG200 COLLET CHUCK NMTB50 x TG-200 x 4.00"Gage

  • Fairfield, Iowa, United States
  • Jan 30th
CAT40 ER16 - 70 / 2-3/4" COLLET CHUCK SET W/ CHUCK, 8 PC COLLETS, WRENCH, ER NUT

CAT40 ER16 - 70 / 2-3/4" COLLET CHUCK SET W/ CHUCK, 8 PC COLLETS, WRENCH, ER NUT

  • Murfreesboro, Tennessee, United States
  • Jan 30th
Hardinge 3J 5/16" Collet

Hardinge 3J 5/16" Collet

  • Garden City, Idaho, United States
  • Jan 30th
SYIC LOT OF COLLETS

SYIC LOT OF COLLETS

  • Fremont, Ohio, United States
  • Jan 30th
Compact Air Products SC111C Collet Closer, .25".

Compact Air Products SC111C Collet Closer, .25".

  • Dana Point, California, United States
  • Jan 30th
LATHE FACEPLATE 11 INCH. 1 5/8" - 8 THREADS 1 1/8" thick

LATHE FACEPLATE 11 INCH. 1 5/8" - 8 THREADS 1 1/8" thick

  • Barrington, Illinois, United States
  • Jan 30th
South Bend Atlas Clausing Face Plate T-Slot 8"

South Bend Atlas Clausing Face Plate T-Slot 8"

  • Chicago, Illinois, United States
  • Jan 30th
30" x 20" Aluminum Milled Custom Vacuum Table Plenum (from Clampusystems)

30" x 20" Aluminum Milled Custom Vacuum Table Plenum (from Clampusystems)

  • Berkeley, California, United States
  • Jan 30th
A.G. Davis/AA Gage 12" Autodex with 180 deg Reciprocating Index Rotary Table

A.G. Davis/AA Gage 12" Autodex with 180 deg Reciprocating Index Rotary Table

  • Shippensburg, Pennsylvania, United States
  • Jan 30th
Haas 6" Rotary Table (no controller) - FE35

Haas 6" Rotary Table (no controller) - FE35

  • Bloomfield, Connecticut, United States
  • Jan 30th
ACER VSK-8A Precision 3-Jaw 8" Scroll Chuck

ACER VSK-8A Precision 3-Jaw 8" Scroll Chuck

  • Anaheim, California, United States
  • Jan 30th
High Quality Vintage Machinist Vise. Jaws (2 1/2" x 1 1/2") Opens to 2 5/8"

High Quality Vintage Machinist Vise. Jaws (2 1/2" x 1 1/2") Opens to 2 5/8"

  • Coventry, Rhode Island, United States
  • Jan 30th
IRWIN RECORD 3" JAW CLAMP ON VICE, 2-1/2" CAPACITY, 1-1/2" DEPTH

IRWIN RECORD 3" JAW CLAMP ON VICE, 2-1/2" CAPACITY, 1-1/2" DEPTH

  • Amherst, Ohio, United States
  • Jan 30th
Enco Sine Vise Vintage Made in USA Brand new old stock

Enco Sine Vise Vintage Made in USA Brand new old stock

  • Lawton, Oklahoma, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies