collet holder for sale, brand-new and used.

NMTB KANTO Microbore Collet holder. Number T50U-BC8-E1 made in Japan by Kanto, this holder was never used and has been sitting 30 years but in new condition with a black ox finish. The two new C8 Sandvik .625 dia collet has the pin lock for a weldon shank end mill and two sandvik 19/32 collets.

NMTB KANTO Microbore Collet holder. Number T40U-BC8-E2 made in Japan by Kanto, this holder is used aand in good condition. You get a new C8 Sandvik .625 dia collet has the pin lock for a weldon shank end mill and a used 1 inch collet.

"EASY-SAW HOLDING FIXTURE" FOR 5C-COLLET STOP Use to hold and cut Extruded Aluminum triangular 5C-Collet bar stock. all one piece with saw slot and stock slots. Stock cuts easily with a hacksaw using the "Easy-Saw Fixture" -- a useful holder for cutting the stock.

PCM ET1-32 ? 6.20mm Floating Tap Collet #1532.06200. Without Spring!

ER 20 COLLET ONE SET 12 PCS ? 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm Collet: ER 20 Usage: for clamping cylindrical shafts, DIN 6499 Material: Alloyed case-hardened steel with a tensile strengh of 800N/mm2. Carbonized 44+4 HRC, Grinded Handling: The nut with the inserted collet is then to be screwed upon the collet chuck.

ER16 COLLET ONE SET 9 PCS ? 2, 3, 4, 5, 6, 7, 8, 9, 10mm Collet: ER16 Usage: for clamping cylindrical shafts, DIN 6499 Material: Alloyed case-hardened steel with a tensile strengh of 800N/mm2. Carbonized 44+4 HRC, Grinded Handling: The nut with the inserted collet is then to be screwed upon the collet chuck.

ER 11 COLLET ONE SET 13 PCS ? 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm Collet: ER 11 Usage: for clamping cylindrical shafts, DIN 6499 Material: Alloyed case-hardened steel with a tensile strengh of 800N/mm2. Carbonized 44+4 HRC, Grinded Handling: The nut with the inserted collet is then to be screwed upon

ER16 COLLET CHUCK 3.50" PROJECTION- LYNDEX G6.3 Balanced To 18,000 RPM Features Collet Chucks TIR: <.0001" at collet face Made from nickel chrome molybdenum alloy, hardened to 55 - 58 Rc. Ground surface for perpendicular contact between retention knob and holder. AT3 or better taper contact: .0028° tolerance variation 80 to 126 millionths Drive keys milled to same depth for symmetrical body design.

ER25 COLLET CHUCK 2.50" PROJECTION- LYNDEX G6.3 Balanced To 18,000 RPM Features Collet Chucks TIR: <.0001" at collet face Made from nickel chrome molybdenum alloy, hardened to 55 - 58 Rc. Ground surface for perpendicular contact between retention knob and holder. AT3 or better taper contact: .0028° tolerance variation 80 to 126 millionths Drive keys milled to same depth for symmetrical body design.

ER16 COLLET CHUCK 2.25" PROJECTION- LYNDEX G6.3 Balanced To 18,000 RPM Features Collet Chucks TIR: <.0001" at collet face Made from nickel chrome molybdenum alloy, hardened to 55 - 58 Rc. Ground surface for perpendicular contact between retention knob and holder. AT3 or better taper contact: .0028° tolerance variation 80 to 126 millionths Drive keys milled to same depth for symmetrical body design.

ETM ER-40 Spring Collet Chuck Set - Taper: R8 COLLET SIZE: ER-40 For Erickson Flange Tooling Systems Applications Real double angle 8° collet for extreme concentricity, powerful gripping and parallel clamping. Features A must when you need to hold tools accurately and rigidly. Wide holding range of .0394" on each collet.

Full Metric ER40 Collet Storage Unit. This collet rack set is engraved for Metric collets and with Fractional Inch sizes.

Lyndex line of high-quality CAT TG Collet Chuck offers have ground surface for perpendicular contact between retention knob and holder. AT3 or better taper. Equipped with a left-hand-threaded stop screw and chuck nut.

Individual Precision ER32 Collet Accuracy: 0.0003" or 5um

Full Inch ER16 Collet Storage Unit This collet rack has a pocket for every fractional inch size ER16 collet.

ERICKSON COLLET HOLDER1" Shank diameter7" OALComes as shown with 1\2" collet Terms and condition: Please read all the information before bidding or Buying, Thank you Payment Method: -

Aluminium Material Mini Quick change tool post and holder 5PCS/SET 1. Fits 7x10, 7x12 and 7x14 mini lathes 2. Made from 6061 T6 Aluminum 3.

ISO 30 ER32 Collet Chuck Tool Holder Balanced to 20,000 RPM This is a brand new unused collet that I purchased here on eBay that ended up being the wrong size. Product features: Dynamically balanced to 20,000RPM at G2.5 by Haimer balancing machine at all location for consistent balance Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange a flat is cut to compe