compressor unloader for sale, brand-new and used.

Quincy air compressor unloader valve and gaskets Most all parts are new there is some used

SHIPS WORLDWIDE! We bend backwards for our customers. CASHIER'S CHECK OK, NO C.O.D., For commercial compressors see my other auctions or e-mail or we can start an auction on an item you need Buyers are encouraged to ask questions before bidding.

SHIPS WORLDWIDE! For commercial compressors see my other auctions or e-mail or we can start an auction on an item you need

This is a Quincy 216 pump. It has been completely rebuilt to include new rings, valves, bearings, unloader parts, gaskets, and oil seal. It is a pressure lube compressor.

This is a Quincy Model 210 air compressor pump. It is 0.5 to 1 HP , It has been rebuilt to include new rings, valves, bearings, gaskets, and oil seal. It has a hydraulic unloader and head unloaders.

This is an Ingersoll Rand MAJOR Overhaul kit for the 71 T2 air compressor. It includes rings, valves, 2 main roller bearings, gaskets, oil seal, 2 iron connecting rods, crank pin bushing and head unloader kit. If you have any questions, call me (973)951-0804 John Note; This picture does NOT show connecting rods or main bearing but they are included.

*NEW IN BOX* QUINCY AIR COMPRESSOR Q-325, AFTERMARKET, MAJOR OVERHAUL REBUILD KIT* *Record of change is 17 and up* KIT INCLUDES: TIMKEN ROLLER BEARING #2788 PISTON RING SET #RK-8166SS-Q TIMKEN ROLLER BE

*NEW IN BOX* QUINCY AIR COMPRESSOR Q-325, AFTERMARKET, MAJOR OVERHAUL REBUILD KIT* *Record of change is 1 TO 5* KIT INCLUDES: TIMKEN ROLLER BEARING #2788 PISTON RING SET #RK-8166SS-Q TIMKEN ROLLER BEARI

*NEW IN BOX* QUINCY AIR COMPRESSOR Q-325, AFTERMARKET, MAJOR OVERHAUL REBUILD KIT* *Record of change is 9 TO 14* KIT INCLUDES: TIMKEN ROLLER BEARING #2788 PISTON RING SET #RK-8166SS-Q TIMKEN ROLLER BEAR

Rebuilt Ingersol-Rand Model 15-T , Type-30, Three cylinder, Two stage, 80-CFM, 175-PSI, [Industrial grade] Bare pump only[ No tank or motor.] Constant speed heads with unloaders, Low oil level safety switch, Two belt drive,[Requires C-Wide belts ] Castings have been sand blasted and washed. Valve plates have been resurfaced. Cylinders are tight.

This pressure switch was installed but not used, because I discovered the motor on the air compressor was bad. No reserve, happy bidding! It's got 4 1/4 pipe ports, on/off switch, unloader valve, on at 95 psi, off at 125 psi. 

Phoenix™ 69MB7Y 95/1