Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 0

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 1

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 2

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 3

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 4

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 5

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 6

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 7

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 8

Compuvideo SVR-1100CB Dual Channel Oscilloscope / Waveform / Vectorscope, US $100.00 – Picture 9

Compuvideo Svr-1100cb Dual Channel Oscilloscope / Waveform / Vectorscope

US $100.00

Ames, Iowa, United States
Jan 29th

Open on mobile:
QR code

A used Compuvideo SVR 1100 CB. Comes with manual. This is the higher quality Line Select model. Features: High Sensitivity: Sensitivity as high as 1mV/div Wide Bands: The frequency is DC to 5MHz(-3dB) at 1,2 mV/DIV and DC to 20MHz(40MHz for Line Select Models)(-3dB) from 5mV/div Continuous Switching Sweep: A rotary switch enables vertical axis sensitivity to be adjusted continuously from 1mV/div to 5V/div High Speed Sweep: High speed sweep is possible at a time base of 50ns/div (during x 10 MAG) (20 ns/div for LS series) High Accuracy: Accuracy within 3% for both vertical axis sensitivity and sweep time. Large Aperture: The 150 mm rectangular CRT monitor features an internal graticule easy visual recognition of waveforms. The waveforms displayed in high brightness can be monitored with no parallax. Acceleration voltage: 12kV for Line Select models 2kV for others Trace Rotation: The horizontal trace angle is easily corrected. Automatic Free Run: The trace can be checked even when there are no trigger signals to be input. Television Trigger: With a specially designed circuit, adjustment-free, stable synchronization for both frames and lines can be realized over the whole range from large to small amplitudes. One Touch X-Y: Switching to X-Y operation at the touch of a lever switch. Automatic Trigger Signal Selection: Trigger signals can be selected automatically according to the VERT MODE control setting by simply switching the SOURCE control to VERT. CH1 OUTPOUT: A channel 1 output terminal has been added for CH1 input signal monitoring. High Stability, High Reliability: Hybrid integrated circuits have been employed in all the components, realizing high standards in terms of both stability and reliability. Prevention of Trace Line Jump When Selecting Input Signal Coupling: Better operability has been achieved with an anti-trace line jump circuit that prevents sudden changes in the trace position when input signal coupling is switched from GND to AC position Specifications: SVR-1100 CB (Line Select Model) CRT Type: Rectangular with internal graitcule Acceleration Voltage: Approx. 12kV Display Area: 8 X 10 div (1 div = 10mm) VERTICAL AXIS (CH1 and CH2) Sensitivity: 1 mV, 2mV/div ± 5%, 5mV/div ~ 5V ± 3% Attenuator: 1-2-5 step, 12 range with fine adjustment Input Impedance: 1 M? ± 2%, Approx. 28 pF Frequency Response 5mV/div ~ 5V/div: DC: DC ~ 40 MHz within – 3 dB AC: 10 Hz ~ 40 MHz within – 3 dB 1mV/div, 2mV/div: DC: DC ~ 5 MHz within – 3 dB AC: 10 Hz ~ 5 MHz within – 3 dB Rise Time: 8.75 ns maximum 70 ns maximum (5 MHz) Crosstalk: - 40 dB maximum Operating Modes: CH1: CH1 single trace CH2: CH2 single trace ALT: Alternating display of two signal CHOP: Chopped display of two signal ADD: Display of combined CH1 + CH2 waveforms CHOP Frequency: Approx. 250 kHz Channel Polarity: Normal or inverted, channel 2 only inverted Non-distorted Maximum Amplitude: More than 8 div (DC to 40 MHz) Maximum Input Voltage: 500 Vp-p or 250 V (DC+ACpeak) HORIZONTAL AXIS Sensitivity: Same as vertical axis (CH2) Imput Impedance: Same as vertical axis (CH2) Frequency Response: DC: DC ~ 500 kHz within – 3 dB AC: 10 Hz ~ 500 kHz within – 3 dB X-Y Phase Difference: 3° or less at 50 kHz Operating Modes: X-Y operation is selectable with MODE switch CH1: Y-axis CH2: X-axis Maximum Input Voltage Same as vertical axis (CH2) SWEEP SYSTEM Sweep Modes: NORM: Triggered Sweep AUTO: Auto free run with no signal input Sweep Time: 0.2 µs/div ~ 0.5 s/div, ±3% 1-2-5 step, 19 range with fine adjustment Sweep Expansion: 10 X magnification, ±5% Linearity: ±3% (±5% at X 10 MAG TRIGGERING: Trigger Signal Source: VERT: Input signal selection with VERT MODE control CH1: CH1 input signal CH2: CH2 input signal LINE: Commercial-use power source EXT: Signal input through EXT.TRIG terminal External Trigger: Input impedance: 1 M?, Approx. 35 pF Maximum Input Voltage 100 Vp-p or 50 V (DC+ACpeak) Trigger Coupling Modes: AC: Trigger is capacitively coupled; dc component is blocked TV-F: Vertical sync pulses of a composite video signal are selected for triggering. TV-L: Horizontal sync pulses of a composite video signal are selected for triggering. Triggering Sensitivity MODE COUPLING SIGNAL FREQ. SOURCE VERT CH1, CH2 EXT NORM AC 10 Hz ~ 20 MHz 1.5 div 0.25 Vp-p 20 MHz ~ 40 MHz 2.0 div 0.3 Vp-p TV-F, TV-L 1.0 div 0.2 Vp-p AUTO Same as above specs at 50 Hz or above SVR-1100 CB (Line Select Model) CALIBRATED SIGNALS Waveform: Positive square wave Voltage: 1 Vp-p, ±3% Frequency: Approx. 1 kHz INSENSITY MODULATION Sensitivity: TTL level, positive voltage decreases brightness Input Impedance: Approx. 5 k? Usable Frequency Range: DC ~ 3.5 MHz Maximum Input Voltage: 100 Vp-p or 50 V (DC + ACpeak) CH1 SIGNAL OUTPUT Output Voltage: Approx. 50 mV/div (50 ? termination) Output Impedance: Approx. 50 ? Frequency Response: 10 Hz ~ 20 MHz within ± 3 dB (50 ? termination) TRACE ROTATION Adjustment: Adjustable from front panel OTHERS Dimensions (WxHxD) 290 (290) x 150 (170) x 280 (440) mm ( ) dimensions include protrusion from basic outline dimensions Weight Approx. 7kg ENVIRONMENTAL Within specifications: Full Operation: 10 to 35° C, 85% max. relative humidity 0 to 40° C, 85% max. relative humidity LINE VOLTAGE/FREQUENCY 100/120/220 VAC ±10%, 216 to 250 VAC, 50/60 Hz POWER CONSUMPTION: Approx. 30 W WAVEFORM / VECTORSCOPE Specifications Vectorscope Phase rotation: 360° Circle Subcarrier capture: ± 50 Hz Accuracy Phase: 1% Waveform DC Restorer IRE Filter Chroma Filter 1H – Time Base 2H – Time Base VAR – Time Base 1MS/DIV, 2V Mag, 2V Oscilloscope 20 MHz Dual Trace Vertical 5mV to 20V 12 ranges w/line control TV/Video Sync External Trigger X-Y Display

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Compuvideo
Bandwidth	Less than 60MHz
Model	SVR-1100 CB
Channels	2
Type	Analog
Sample Rate	Less than 200MSa/s