control assemblies for sale, brand-new and used.

The original intent was for controlling temperature and humidity and providing clean filtered air for a very high voltage switchroom, so the units are equipped with a lot of additional control and monitoring facilities. As-built factory drawings included with each unit.

Blodgett 1415-SINGLE - 27 Inch Electric Countertop Single Deck Oven in great conditions some scrach from normal use and 1 or 2 dents listing at a low prize reason is its missing the stones you can order those on line about $60.00 for each any questions please ask

1500 RPM Shaded Pole Blower .55 amps, 115 Volts 60/50hz. Name Plate CFM 105 Rotation CWSE

Dayton Electric Blowers not recommended for speed control Used in fireplace inserts, woodstoves and more

We have available the control coil portion of a Parker 71331 hydraulic fluid flow valve. This is only the electric coil portion and not the actual valve body. This auction is for 5 coil assemblies (4 shown) Please email with any questions.

Advanced IC Engineering UMATS universal modify and test set with connector cable (power transformer NOT included)

This Assembly is without Nozzle. In original box - DOES NOT INCLUDE NOZZLE Series 3010 Hose Rack Assemblies permit one man operation and provide immediate means of fire control. These units are capable of delivering the nationally recognized standard of 100 GPM at 65 PSI at the nozzle and are rated for Class II service under NFPE/FEMA Class of Service.

This Is The Genuine BoreMaster ZX-1000 Drilling Package 14 HP Kohler High Combustion Engine Complete With 125 Feet of 1-1/4" id Manufactured Drill Rods With Machined Joints

Lovejoy LSC-2 Shaft Collar, Zinc Plated Steel, 1/8" Bore, 3/8" OD, 1/4" Width Product Features

Used- Sano Blown Fi

MJ Research PTC-200 96 Well Gradient PCR Machine with Warranty For Sale ID#1349

Dayton Transflow Blowers not recommended for speed control Used in fireplace inserts, woodstoves and more

MG Chemicals 8330S-200ML Silver Epoxy, Extreme Conductivity, 4 hours Working Time, 24 oz., Pair of 2 Cans Product Features Excellent 0.0007 ohm·cm electrical resistivity and 1.75 W/(m·K) thermal conductivity Easy 1:1 mix ratio and long working time - may be mixed once and then used as a 1-part epoxy for a four hour production shift Optimal cure temperature of only 65 °C - lower than most 1-part epoxie

Stainless Steel Panel Screw, Plain Finish, Knurled Head, Slotted Drive, 1-3/8" Length, #10-32 Threads (Pack of 10) &nb