controller assembly for sale, brand-new and used.

Zilla 1k 1000 amp High Voltage (HV) controller with -pa options for controlling multiple contactors for polarity reversing. (Reverse at the flip of a switch.) Setup for use with

MKS Baratron valves, transducers, and MKS 600 Series controller- This assembly has the following parts along with the clamps and stainless steel fitting. The valves and transducers are all believed working, and the controller needs repair(see below) MKS Baratron type 626 pressure transducer MKS flow control valve Model 253B-2-50-1 MKS Pneumatic shut off valve model LPV1-50-AK-CLVS MKS 600 Series Controller- The controller is not working.

Provide precise control of mixing speed within ±0.2% despite changes in viscosity, temperature, or line voltage. Monitor torque, set torque limits, or measure and control differential torque with mixer head in use and sets the appropriate rpm and torque limits for that motor. Controller measures 6½''W x 3½''H x 7¾''D (165 mm W x 89 mm H x 197 mm D).

National Instruments (NI) PXI-8187 embedded real-time controller, with 30GB hard drive and 1GB memory. The controller is running Win XP Pro SP3, with NI DAQmx and device drivers installed. The controller has assembly part # 189792C-023, SN 117883F, same controller shown.

Fully tested, used, National Instruments (NI) PXI-8183 embedded real-time controller, with 40GB hard drive and 256MB memory, baseline standard configuration for this model controller. The controller is running Win XP Pro SP2, with NI DAQmx device drivers installed. The controller has assembly part # 187317K-612, same controller shown.

Model SDL-5 Attritor Grinding tank: 9 Gallon gross tank volume, 304 SS, jacketed for cooling.Jacket: Carbon Steel, water cooled, 10 psigTank Cover: 1 pc. vented for cryogenic grinding with LN2Product discharge: 304 SS ball valve and tool steel bar grid.Tank tilt assembly: Gear tilting assembly faci

Fully tested, used, National Instruments (NI) PXI-8184 embedded real-time controller, in original NI shield bag as shown, with 30GB hard drive and 512MB memory. The controller is running Win XP Pro SP3, with NI DAQmx device drivers installed. The controller has assembly part # 189792E-710, same controller shown.

National Instruments (NI) PXI-8108 high-performance embedded real-time controller (Intel Core 2 Duo, T9400-based, 2.53 GHz dual-core processor), with 230GB hard drive, and 4GB memory (max supported in PXI-8108). The controller is running Win XP Pro SP3, with NI DAQmx and device drivers installed. All controller peripheral device drivers, including GPIB are working properly (see hardware devices screen shot).

Tested, used, National Instruments (NI) PXI-8174 embedded real-time controller, same as shown, with 20GB hard drive and 128MB memory. The controller is running Windows 2000 Professional SP2, with NI software installed. The controller has assembly part # 187317F-610.

Fully tested, used, National Instruments (NI) PXI-8183 embedded real-time controller, with 40GB hard drive and 256MB memory, baseline standard configuration for this model controller. The controller is running Win XP Pro SP3, with NI DAQmx device drivers installed. The controller has assembly part # 187317K-612, same controller shown.

Fully tested, used, National Instruments (NI) PXI-8186 embedded real-time controller, in original NI shield bag as shown, with 60GB hard drive and 1GB memory. The controller is running Win XP Pro SP3, with NI DAQmx device drivers installed. The controller has assembly part # 189792C-712, same controller shown.

Q - U - E - S - T - I - O - N - S ? call 503-377-8247 OR SEND US YOUR QUESTION THRU EBAYS MESSAGING SYSTEM

HP/Agilent 6890 EPC controller card in good working condition.

Generac 0J8371BSRV controller revision J new in box 

leeson_108052_00_motor_w_actuator_and_controller Policies