conveyor bearings for sale, brand-new and used.

Up for sale is a conveyor/feed belt for a Performax or Jet 16-32 drum sander. This is the same as Jet item # 60-0316-P except it is P-80 grit instead of P-100 grit... we've gone through several of these over the past few years and find the slightly lower grit grips better and lasts a lot longer.

Located in Marietta, Georgia Good working condition. Well maintained. Taken offline due to a company mailroom consolidation Icon – 3 operating system with spare memory boards 15 rebuilt MS Hoppers NP – 100 Gripper conveyor with all new chain bearings Sheridan operating cabinet A QGB 30 hp Quincy compressor with dryer and QUB 20hp Quincy vacuum pump Numerous spare parts including: Spare main drive motor

Flex Link Solder Wave Exit Conveyor complete and operational with spare belts and bearings. L to R Board Flow, Speed Control and Cooling Fans. 18" Max board width, 24" incline track, 76" Decline track.

MFG Date: 2002 Voltage: 110 Comes with 3 die rolls: 3.5in Ginger Bread Man, 3.5in round scalloped cookie,

Ramco 36" Wide Dual head belt sander Stock Number: 3183 Ramco 37T/2 series 72 Serial No. 1250 Condition: Very Good

A RBS shrink tunnel in very good condition. This tunnel can shrink all types of films. Specifications: Dual zone shrink tunnel with a 360 degree air delivery system for greater performance.

Pharmaceutical size buckle folder. Heidelberg Stahl Model T-36 4/4 Pile feed with quick sets, PS-100 batch counter, small work conveyor, hang-on delivery table. Machine has been stripped to the frame, painted and totally reconditioned.

Up for sale is a conveyor/feed belt for a Performax or Jet 16-32 drum sander. This is the same as Jet item # 60-0316-P except it is P-80 grit instead of P-100 grit... we've gone through several of these over the past few years and find the slightly lower grit grips better and lasts a lot longer.

Grip-and-release drawer stop safety system High-strength 3/16" steel plate bearing tractors Removable 250 lb. heavy-duty conveyor roller bearings Rugged 14-Ga. steel handles

Climax Metal H2C-225 Recessed Screw Clamping Collar, Two Piece, Black Oxide Plating, Steel, 2-1/4" Bore Size, 3-1/2" OD, With 5/16-24 x 1 Set Screw

Climax Metal H2C-200 Recessed Screw Clamping Collar, Two Piece, Black Oxide Plating, Steel, 2" Bore Size, 3-1/4" OD, With 5/16-24 x 1 Set Screw

Climax Metal H2C-187 Recessed Screw Clamping Collar, Two Piece, Black Oxide Plating, Steel, 1-7/8" Bore Size, 3-1/4" OD, With 5/16-24 x 1 Set Screw

Climax Metal H2C-175 Recessed Screw Clamping Collar, Two Piece, Black Oxide Plating, Steel, 1-3/4" Bore Size, 3" OD, With 5/16-24 x 1 Set Screw

Electrovert Omniflo Slotted Pin Chain Sprocket Shaft2 End BearingsCame from 1999 OmnifloSee Pics for Details

60" Tail Roller 66" Long26" Diameter Tail roller is used but in good working condition. Bearings turn smooth. If you have any questions or concerns please feel free to message.

36" Head Roller 40" Long20" Diameter Head roller is used but in good working condition. Bearingsturn smooth. Rubber lagging is worn a bit.

60" Head Roller 66" Long31" DiameterRubber LaggedComes with formsprag backstop Head roller is in good working condition. Bearings turn smooth. Rubber lagging has some wear but still have some life left on it.

36" Tail Roller 40" Long19" Diameter Roller is used but in good working condition. Bearings turn smooth. Rubber lagging has a bit of wear on it.