+ Post new Ad
Coolant Adapter, US $35.00 – Picture 0
Coolant Adapter, US $35.00 – Picture 1
Coolant Adapter, US $35.00 – Picture 2
Coolant Adapter, US $35.00 – Picture 3
Coolant Adapter, US $35.00 – Picture 0
Coolant Adapter, US $35.00 – Picture 1
Coolant Adapter, US $35.00 – Picture 2
Coolant Adapter, US $35.00 – Picture 3

Coolant Adapter

US $35.00

  • Splendora, Texas, United States
  • Jun 9th
Open on mobile:
QR code
This adapter allows for coolant to flow thru the bore of tools that may be too long for your turret adapter. Our adapter provides for a tool to stick up to 1/2 inch thru the back of the turret block and still flow coolant thru the tool. Don't mess with tubing any more. Bolt our adapter to the back of your turret block, put your tool back a little further and know you'll get good coolant flow. Turret block tools and bolts not included. This listing is just for the adapter. Fits the Haas St-20 turret adapter that is approximately 4" wide, 3.25 long and allows for a tool or a sleeve to extend an extra 1/2 inch past the back of the turret block and still flow thru coolant. 
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer DelEnergy
Country/Region of Manufacture United States

Directions

Similar products from Adapters & Arbor Tool Holders

Mill arbors

Mill arbors

  • Festus, Missouri, United States
  • Jun 9th
Scovill hand operated bench press M-370 1

Scovill hand operated bench press M-370 1

  • Springfield, Oregon, United States
  • Jun 9th
WELL USED COLLIS MORSE TAPER ADAPTER MT2-Socket x MT2-Shank MTA

WELL USED COLLIS MORSE TAPER ADAPTER MT2-Socket x MT2-Shank MTA

  • Fairfield, Iowa, United States
  • Jun 9th
USED SCULLY JONES MT2 x 7/16" SPLIT SLEEVE DRILL DRIVER .4375" 09519

USED SCULLY JONES MT2 x 7/16" SPLIT SLEEVE DRILL DRIVER .4375" 09519

  • Fairfield, Iowa, United States
  • Jun 9th
Spi 75-428 1" NMTB40-MT4 Quick Change End Mill Adapter

Spi 75-428 1" NMTB40-MT4 Quick Change End Mill Adapter

  • Venice, Florida, United States
  • Jun 9th
DAKE NO. Y 901002 ARBOR PRESS 1-1/2 TON HAND PRESS BENCH PRESS USED

DAKE NO. Y 901002 ARBOR PRESS 1-1/2 TON HAND PRESS BENCH PRESS USED

  • Wooster, Ohio, United States
  • Jun 9th
Jacobs Morse Taper #5 to #4 Adapter 654 30428 (LOC1380B) TS5

Jacobs Morse Taper #5 to #4 Adapter 654 30428 (LOC1380B) TS5

  • Laingsburg, Michigan, United States
  • Jun 9th
Collis No. 3 Drift Pin

Collis No. 3 Drift Pin

  • Peoria, Illinois, United States
  • Jun 9th
DCA2MT0JT Drill Chuck Milling Machine Precision Drill Chuck Arbor Adapter

DCA2MT0JT Drill Chuck Milling Machine Precision Drill Chuck Arbor Adapter

  • Pomona, California, United States
  • Jun 9th
FAMCO Machine Company 2 Arbor Press Used? NOS?

FAMCO Machine Company 2 Arbor Press Used? NOS?

  • Fort Collins, Colorado, United States
  • Jun 9th
Makita 194633-2 Drywall Nose Adaptor for BTD141, BTD142HW

Makita 194633-2 Drywall Nose Adaptor for BTD141, BTD142HW

  • El Monte, California, United States
  • Jun 9th
Chamberlain Mfg Corp. - Taper Shank Tool Socket – P/N: 60114 (NOS)

Chamberlain Mfg Corp. - Taper Shank Tool Socket – P/N: 60114 (NOS)

  • Hawthorne, Nevada, United States
  • Jun 9th
KENNAMETAL FTE025469 TAP EXTENSION CHUCK DRIVER FOR #14&1/4" TAPS

KENNAMETAL FTE025469 TAP EXTENSION CHUCK DRIVER FOR #14&1/4" TAPS

  • Spencer, Indiana, United States
  • Jun 9th
Jacobs Drill Chuck Arbor 2 MT to 2 JT Model No. A0202

Jacobs Drill Chuck Arbor 2 MT to 2 JT Model No. A0202

  • Jamestown, New York, United States
  • Jun 9th
Cushman Japan Drill Chuck Arbor 2 MT to 4 JT

Cushman Japan Drill Chuck Arbor 2 MT to 4 JT

  • Jamestown, New York, United States
  • Jun 9th
5C Collet Spindle adapter sleeve for south bend lathe heavy 10 13 14.5 16

5C Collet Spindle adapter sleeve for south bend lathe heavy 10 13 14.5 16

  • Harvard, Massachusetts, United States
  • Jun 9th
Morse Taper 4 Spindle adapter sleeve for south bend lathe heavy 10 13 14.5 16

Morse Taper 4 Spindle adapter sleeve for south bend lathe heavy 10 13 14.5 16

  • Harvard, Massachusetts, United States
  • Jun 9th
ETM 1-1/2" x 2.953" x 4" x 5/8"-11 NMTB40 Taper Shank End Mill Adapter

ETM 1-1/2" x 2.953" x 4" x 5/8"-11 NMTB40 Taper Shank End Mill Adapter

  • Venice, Florida, United States
  • Jun 9th
Kennametal ss100da104488 da100 collet chuck extension (LOC1423B) TS5

Kennametal ss100da104488 da100 collet chuck extension (LOC1423B) TS5

  • Laingsburg, Michigan, United States
  • Jun 9th
Kennametal morse taper1 da100 collet chuck (LOC1423B) TS5

Kennametal morse taper1 da100 collet chuck (LOC1423B) TS5

  • Laingsburg, Michigan, United States
  • Jun 9th

People who viewed this item also vieved

5 BORING BARS SNAP TAP, KENNAMETAL, VALENITE,

5 BORING BARS SNAP TAP, KENNAMETAL, VALENITE,

  • Naperville, Illinois, United States
  • Jan 30th
HAAS 1.500" ID BOLT - ON BORING BAR HOLDER SL20, ST-20, ST30

HAAS 1.500" ID BOLT - ON BORING BAR HOLDER SL20, ST-20, ST30

  • Tacoma, Washington, United States
  • Jan 30th
Command Tooling Systems B4E4-0312, BT40 5/16 EMH 2.5GL & RB4M-0001 Ret. Knob

Command Tooling Systems B4E4-0312, BT40 5/16 EMH 2.5GL & RB4M-0001 Ret. Knob

  • Watsonville, California, United States
  • Jan 30th
Command Tooling Systems B4E5-0375AB End Mill Tool Holder & RS4M-0217-H Ret. Knob

Command Tooling Systems B4E5-0375AB End Mill Tool Holder & RS4M-0217-H Ret. Knob

  • Watsonville, California, United States
  • Jan 30th
NEW ACCUPAK 41C1011 1 IN BUSHING 1-1/4X1X1/2IN D237963

NEW ACCUPAK 41C1011 1 IN BUSHING 1-1/4X1X1/2IN D237963

  • Delta, Ohio, United States
  • Jan 30th
(11) DRILL BUSHINGS TYPE H 15/32"

(11) DRILL BUSHINGS TYPE H 15/32"

  • Galax, Virginia, United States
  • Jan 30th
CAT50 1/2" DIA. HYDRAULIC HOLDER HYDRA-LOCK CAT 50 GREAT CONDITION LOT C8304

CAT50 1/2" DIA. HYDRAULIC HOLDER HYDRA-LOCK CAT 50 GREAT CONDITION LOT C8304

  • Dayton, Ohio, United States
  • Jan 30th
2 PC SET CAT45 TG100 COLLET CHUCK CAT 45 TG 100 LOT C8057

2 PC SET CAT45 TG100 COLLET CHUCK CAT 45 TG 100 LOT C8057

  • Dayton, Ohio, United States
  • Jan 30th
ALMOND No. 34 Chuck Key in good used condition. Appears to be 3/4" chuck.

ALMOND No. 34 Chuck Key in good used condition. Appears to be 3/4" chuck.

  • San Diego, California, United States
  • Jan 30th
Shockwave Magnetic Nutdriver Bit-5/16X2-9/16 NUT DRIVER

Shockwave Magnetic Nutdriver Bit-5/16X2-9/16 NUT DRIVER

  • Brooklyn, New York, United States
  • Jan 30th
Kennametal Indexable Tool Holder NSL-162C (#2)

Kennametal Indexable Tool Holder NSL-162C (#2)

  • Woodstock, Illinois, United States
  • Jan 30th
Kennametal Indexable Tool Holder DDJNL-164D

Kennametal Indexable Tool Holder DDJNL-164D

  • Woodstock, Illinois, United States
  • Jan 30th
SPLIT MANDREL SLOTTED FOR ABRASIVE SANDING USE WITH FOREDOM - DREMEL 1/8" SHANK

SPLIT MANDREL SLOTTED FOR ABRASIVE SANDING USE WITH FOREDOM - DREMEL 1/8" SHANK

  • North Hollywood, California, United States
  • Jan 30th
4 - 424 Mandrels 3/32" shank Polishing Points Clasp Polisher Dremel Rotary tool

4 - 424 Mandrels 3/32" shank Polishing Points Clasp Polisher Dremel Rotary tool

  • Brentwood, Tennessee, United States
  • Jan 30th
NL1500-CW-DF60-32-90 AXIAL TWIN-HEAD FOR MORI SEIKI NL1500/2500SY/

NL1500-CW-DF60-32-90 AXIAL TWIN-HEAD FOR MORI SEIKI NL1500/2500SY/

  • Irvine, California, United States
  • Jan 30th
NL1500-DF60-20-2-105 RADIAL TWIN-HEAD/ONE SIDE FOR MORI SEIKI NL1500/2500SY ER

NL1500-DF60-20-2-105 RADIAL TWIN-HEAD/ONE SIDE FOR MORI SEIKI NL1500/2500SY ER

  • Irvine, California, United States
  • Jan 30th
Parlec Numertap 770 Tap Adapter 6" Extension for 5/8" Hand Tap 7716CG-6-062

Parlec Numertap 770 Tap Adapter 6" Extension for 5/8" Hand Tap 7716CG-6-062

  • Flint, Michigan, United States
  • Jan 30th
Parlec Numertap 770 Tap Adapter 6" Extension for 3/8" Hand Tap 7716CG-6-037

Parlec Numertap 770 Tap Adapter 6" Extension for 3/8" Hand Tap 7716CG-6-037

  • Flint, Michigan, United States
  • Jan 30th
SPINDLES MANDREL ARBOR ADAPTER HOLDER 5/8” ARBOR HOLE TOOLHOLDER FOR 1/4” SHANKS

SPINDLES MANDREL ARBOR ADAPTER HOLDER 5/8” ARBOR HOLE TOOLHOLDER FOR 1/4” SHANKS

  • North Hollywood, California, United States
  • Jan 30th
Model PNY-69659 Toolholder

Model PNY-69659 Toolholder

  • Peoria, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies