coolant thru drills for sale, brand-new and used.

Two new .479 carbide step drills. 135 drill point, coolant thru,.556 shank with 90 deg chamfer 1.725 deep with 5.8 inch over all. What you see is what you get and thanks for looking.

DRILLS IN VERY GOOD CONDITION. IT APPEARS TO SAY RIGIDEX 4696D10-80R06. I BELIEVE IT USES A STANDARD DRILL INSERT AND LOOKS TO MEASURE ABOUT 1.500" DIAMETER.

the flutes on 1 are fine.the other 1 has a couple of nicks.both need resharpening.will combine shipping.

NEW Kennametal Coolant Thru Indexable Drill body. *note* packaging is labeled incorrect. KSEM1250r5SS125 is whats STAMPED on the tool.

Indexable Cutting Tools - KTIP0374R3SS038 KEN-TIP INDXBL DRILL BODY, Replaceable-Tip Drills; Series: KenTIP; Minimum Drill Diameter (mm): 9.50; Minimum Drill Diameter (Decimal Inch): 0.3740; Maximum Drill Diameter (mm): 9.99; Maximum Drill Diameter (Decimal Inch): 0.3933; Drill Depth by Diameter Ratio: 3xD (NO CARBIDE INSERT)

1 is about 1.020 without insert,the other is about 1.18.will combine shipping.

1 is new in case.the other has no case.will combine shipping.

2 NEW CAMTAC MFG. COATED STEP DRILLS 15.5 x 20 MM COOLANT THRU 6-3/8" LONG H303-OP20 MADE IN USA

Ingersoll .827" DCM Style Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED

ISCAR DCM 0709-254-100A-5D .709" - .744" DCM Style Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills

Ingersoll #Y0100090 C8R01 17MM DCM Style Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATI

Ingersoll .669" - .705" DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFAC

Ingersoll .511" - .527" DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFAC

MADE BY CJT KOOLCARB (USA) .4803" DIAMETER 10" FLUTE LENGTH 13" INCHES OVERALL LENGTH THIS ITEM HAS (2) COOLANT THRU HOLES 118 DEGREE DRILL POINT DIE DRILLS HAVE A CARBIDE TIPPED POINT AND ARE USED PRIMARILY IN THE TOOL&DIE OR MOLDMAKING INDUSTRY FOR DRILLING HARDENED STEELS BETWEEN 45 THRU 65 ROCKWELL. THEY HAVE 2 STRAIGHT FLUTES AND ARE ON A HIGH SPEED STEEL BODY. USE WITH LIGHT FEED AND STEADY PRESSURE.

MADE BY UNION BUTTERFIELD (USA) 35/64" (.5469") DIAMETER 3-1/2" FLUTE LENGTH 6" OVERALL LENGTH 118 DEGREE DRILL POINT YOUR COST = $14.00 DIE DRILLS HAVE A CARBIDE TIPPED POINT AND ARE USED PRIMARILY IN THE TOOL&DIE OR MOLDMAKING INDUSTRY FOR DRILLING HARDENED STEELS BETWEEN 45 THRU 65 ROCKWELL. THEY HAVE 2 STRAIGHT FLUTES AND ARE ON A HIGH SPEED STEEL BODY. USE WITH LIGHT FEED AND STEADY PRESSURE.

MADE BY CLEVELAND TWIST DRILL (USA) CONDITION = NEW 31/64" (.4844") DIAMETER 3" FLUTE LENGTH 6" OVERALL LENGTH 118 DEGREE DRILL POINT DIE DRILLS HAVE A CARBIDE TIPPED POINT AND ARE USED PRIMARILY IN THE TOOL&DIE OR MOLDMAKING INDUSTRY FOR DRILLING HARDENED STEELS BETWEEN 45 THRU 65 ROCKWELL. THEY HAVE 2 STRAIGHT FLUTES AND ARE ON A HIGH SPEED STEEL BODY. USE WITH LIGHT FEED AND STEADY PRESSURE.

Allied Machine and Engineering 23010S-100L

3 - 7.3MM Titex coolant thru solid carbide drills. Paid 85.00 ea. but will sale all 3 for 150.00.

One new old stock Walter Titex 6mm Solid Carbide Coolant Jobber Length Drill Bit. I will be adding more Import and high quality machinist tooling in the next few days. Check out my other items or send me an email if you are looking for something specific.