92 Miscellaneous Zurn Fittings for PEX Tubing These fittings are new and in the original packaging. 1" Fittings (11 Pieces) 1 QickClamp Crimp Ring 1" (5 pack) 1 QickSert CR Coupling 1" x 1" 1 QickSert CR Tee 1" x 1" x 1" 1 QickSert CR Tee 1" x 3/4 " x 1" 1 QickSert CR Tee 1" x 1/2 " x 1" 1 QickSert CR Elbow 1" x 1" 1 QickSert CR Male Adapter 1" x 1" 1 QickSert CR Swivel Adapter 1" FPT x 3/4 " 1 QickPort Cap 1" 1 Copper Female Sweat Adapter 1" x 1" 1 Test Plug 1"
(1) 1/2" x 3/4" PEX Coupling Brass Crimp Fittings PEX x Male Thread Adapter is used when it is necessary to connect PEX tubing to a threaded fitting. Compatible with all types and brands of PEX Tubing
(25) 3/4" PEX Coupling Brass Crimp Fittings PEX x Male Thread Adapter is used when it is necessary to connect PEX tubing to a threaded fitting. Compatible with all types and brands of PEX Tubing
Overview This current sensor is a carrier board or breakout board for Allegro’s ACS709LLFTR-35BB-T Hall effect-based linear current sensor with overcurrent fault output; we therefore recommend careful reading of the ACS709 datasheet (1MB pdf) before using this product. The sensor has an operating voltage of 3 V to 5.5 V and an output sensitivity of 18.5 mV/A when Vcc is 3.3 V (or 28 mV/A when Vcc is 5 V). The following list details some of the sensor’s key features:
Sale is for 2 couplings like the 1 in the picture. The actual diameters are 4-3/8" and 6-1/2" at 75 degrees. For cast iron, plastic, copper, or steel Stainless steel clamps.
CT-300AL Refrigeration Hydraulic Expanding Tool Kit with Tube Cutter Six Easy steps: 1.Deburr inside of tube. 2.Anneal the tube if necessary(for hard or thickwall tube). 3.Screw the expander head on expander.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.