copper hammer for sale, brand-new and used.

Here we have a new Eaton/Cutler-Hammer/Westinghouse 3TA603LDK lug kit for use on L frame breakers. This kit consists of three individual lugs, mounting hardware, and a plastic barrier frame that is needed on some breakers. Each lug will accommodate one or two 400 or 500 MCM cables.

CUTLER HAMMER BREAKERS, #BAB1015, NEW!

Product Details • Handles are trip-free with on-tripped-off positions, reset past off is required to latch breaker contacts after tripping •

Berylco Ball Pien H56 hammer head, measures 4 1/2" long, 1 3/4" by 1 1/4" diameter with a 5/8" by 7/8" handle hole, weighs almost 1 1/2 pounds. Excellent condition, do'es not appear to be used. From my research Berylco hammers are made from Beryllium Copper that makes for high strength, I have had conflict in the past of the metal these hammers are made from.

Wholesale Lot of 18 ea. Irwin 326023 Masonry Hammer Bit - 3/4" x 8 x 12 1/2" Shank With 3 Non-Slip Flats Actual Packaging May Vary Rotary Percussion - Straight Shank • Fits all hammer drills with 3-jaw or Jacobs chuck • Chrome vanadium shaft through-hardened to 50-53HrC • Patented flute geometry removes dust from the hole quicker for fast drilling and long life • Up to 150% faster than other competitive bits • Shot-peened, doub

Champion CM97-1-1/2-x17x22 Proline Spline Shank Carbide 2-Cutter Hammer Bit 1-1/2"x17"x22" Made in Germany The fastest growing hammer bit on the market, Champion CM97 spline bits feature undercut helical fluting for excellent dust removal. The 12-groove spline shank is precision machined to strict tolerances for maximum hammer performance. For use in concrete and hard masonry materials Features: Diameter: 1-1/2 inch Usable Length: 17 inches Overall Length: 22 inches Single Point

Irwin 326022 Masonry Hammer Bit - 3/4" x 3 x 6 With 1/2" Shank 1/2" Shank With 3 Non-Slip Flats Actual Packaging May Vary Rotary Percussion - Straight Shank • Fits all hammer drills with 3-jaw or Jacobs chuck • Chrome vanadium shaft through-hardened to 50-53HrC • Patented flute geometry removes dust from the hole quicker for fast drilling and long life • Up to 150% faster than other competitive bits • Shot-peened, double-tempered finish reduces breakage • Hot isostatically pressed to ext

3 ea. Irwin 326009 Masonry Hammer Bits- 5/16 x 4 x 6 With Plastic Case Rotary Percussion - Straight Shank • Fits all hammer drills with 3-jaw or Jacobs chuck • Chrome vanadium shaft through-hardened to 50-53HrC • Patented flute geometry removes dust from the hole quicker for fast drilling and long life

4 ea. Irwin 326009 Masonry Hammer Bits- 5/16 x 4 x 6 From a Bulk Pack Rotary Percussion - Straight Shank • Fits all hammer drills with 3-jaw or Jacobs chuck • Chrome vanadium shaft through-hardened to 50-53HrC • Patented flute geometry removes dust from the hole quicker for f

3 ea. Irwin 326009 Masonry Hammer Bits- 5/16 x 4 x 6 From a Bulk Pack Rotary Percussion - Straight Shank • Fits all hammer drills with 3-jaw or Jacobs chuck • Chrome vanadium shaft through-hardened to 50-53HrC • Patented flute geometry removes dust from the hole quicker for fast drilling and long life • Up to 150%

Champion CM95-3/8- x 10 x12 SDS-Plus 2-Cutter Hammer Bit 3/8 x 10 x 12" Made in Germany Champion CM95 SDS Plus Hammer Bits - Versatile slot drive system hammer bits fit most rotary hammers. Vacuum brazed with pure copper at 1900 deg F. Vacuum heat treated tool body to 50RC.

The hammer is used and shows some wear but still in good working condition. Shipping international will be additional cost.

Cast and recast a two pound lead hammer. Includes mold, handle, and a five pound lead bar. An excellent choice for a machinist or gunsmith.

This item is a Dixon ground joint air hammer coupling female spud 3/4" female National Pipe Thread x Male Course Nut 1-31/64" O.D. with Copper Seat

Cast and recast a FIVE pound lead hammer. Includes mold, handle, and a five pound lead bar. An excellent choice for a general purpose non-marring hammer work.

Cast and recast a SIX pound lead hammer. Includes mold, handle, and a ten pounds of lead. An excellent choice for a general purpose non-marring hammer work.