corrosion ability for sale, brand-new and used.

The AmScope ME300TA-P digital metallurgical trinocular microscope has interchangeable pairs of 10x and 16x widefield eyepieces, a forward-facing nosepiece with three DIN achromatic objectives, Brightfield episcopic halogen illumination, and a double-layer mechanical stage with a stage stop to protect slides and objectives from damage.

Phase II Ultrasonic Thickness Gauge, 5 Year Warranty, NITS Traceable, #UTG-1500 The new PHASE II UTG-1500 is a hand held microprocessor controlled ultrasonic thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. With uses in many areas of ind

sbphoto50 ~ Pi Tape 900mm-1200mm

Key Product Features: -36 inch arm lengths with a 4 inch diameter dial -Dial is graduated to the 1 degree with 1/2 degree readings possible -All parts are corrosion resistant and arms are made from Anodized Aluminum -Magnifying viewer improves ability for precision reading -Strong locking knob to fix an angle in pla

Key Product Features: -18 inch arm lengths with a 4 inch diameter dial -Dial is graduated to the 1 degree with 1/2 degree readings possible -All parts are corrosion resistant and arms are made from Anodized Aluminum -Magnifying viewer improves ability for precision reading -Strong locking knob to fix an angle in pla

Key Product Features: -Smallest version of our industrial protractors -12 inch arm lengths with a 3 inch diameter dial -Dial is graduated to the 1 degree with 1/2 degree readings possible -All parts are corrosion resistant and arms are made from Anodized Aluminum -Magnifying viewer improves ability for precision re

This sale is for one New other BUSCH Precision Inc. USA No. 1014 Cast Iron Surface Plate 12 x 24 X 5" The measurements are approximate and nominal.

This sale is for ONE previously owned COPY (original not a photocopy) of: Collins, J.A., FAILURE OF MATERIALS IN MECHANICAL DESIGN: ANALYSIS PREDICTION PREVENTION, (Toronto 1981) 629 pages bound in a hard cover with a dust cover with a little wear. Please note that a return stamp and the name of a previous owner are on the inside cover. This work was created with the mechanical designer and undergraduate/graduate student of mechanical failure as a reference.

Schaeffer's #411 Maxkool SS Metalworking Lubricant (5-Gallons)

Aluminum Angle 1.25 x 1.25 x 48 in, 1/16 in thick, NEW!, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 1.25 x 1.25 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, and sometimes from our truck.

Description – Bunch or random Flat and Angles mixed in. Nothing is wider than 1.5in. Don't ask us all the sizes because we won't know.

Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.

This is a MAGNETOOL Compound Sine Plate. Model 665. The table is 6-1/8" X 6-3/8".

Aluminum Angle 3/8 x 3/8 x 48 in, 1/16 in thick, NEW! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/8 x 3/8 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, FL, and sometimes from our truck.

Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.

Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.

Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.

Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.

Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.