+ Post new Ad

CT Tapers & Holders

The average price for current category was $305.53 last month.

There are 4191 ads in this category.

Set(4) BT40 Holders in Variety a of Diameters

Set(4) bt40 holders in variety a of diameters

  • Charlotte, North Carolina, United States
  • Jan 30th
Set of 4 Holders includes:3/4" dia Valenite BT40-E75-275 Holder1-1/2" dia Parlec B40-15EM4 J0004151"dia Valenite BT40-L100-1623/8" dia. Kingston B40-37EM225-K
Cat40 Retention Knob Pull Lengthening Stub

Cat40 retention knob pull lengthening stub

  • Byron, Georgia, United States
  • Jan 30th
iontrades Thanks For visiting IonTrades, I am on Trades New New Cat40 Retention Knob Pull Lengthening Stub Buyer will receive item as pictured Buy it Now from a trusted seller About Us Hello and thanks for looking at our listing. We would like
Cincinnati 40NSE9 No.9 B&S Taper Adapter NMTB40 Taper

Cincinnati 40nse9 no.9 b&s taper adapter nmtb40 taper

  • Chicago, Illinois, United States
  • Jan 30th
NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 #9 Brown & Sharpe taper shanks 1.768" nose diameter, 2.18" long from the bottom of the flange Overall length 5.93" Overall diameter 2.582" flange 0.375" thick with two 0.639" wide cut outs. Shipping: Winner pays actual shipping cost. There is
Putnam 7/8X40 HM406 7/8" End Mill Holder NMTB 40 Taper

Putnam 7/8x40 hm406 7/8" end mill holder nmtb 40 taper

  • Chicago, Illinois, United States
  • Jan 30th
NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 0.875" end mill holder Weldon type shanks 2.109" nose diameter, 2.75" long from the bottom of the flange Overall length 6.5" Overall diameter 2.44" no flange, two 0.639" wide cut outs. Shipping: Winner pays actual shipping cost. There is
Brown & Sharpe 40-1 1" End Mill Holder 4" Long NMTB 40 Taper

Brown & sharpe 40-1 1" end mill holder 4" long nmtb 40 taper

  • Chicago, Illinois, United States
  • Jan 30th
NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 1.00" end mill holder Weldon type shanks 2.12" nose diameter, 4" long from the bottom of the flange Overall length 7.7" Overall diameter 2.376" two 0.639" wide cut outs. Shipping: Winner pays actual shipping cost. There is
CAT40 ER40-70/2-3/4" COLLET CHUCK SET W/ WRENCH, NUT,15PC COLLETS HIGH PRECISION

Cat40 er40-70/2-3/4" collet chuck set w/ wrench, nut,15pc collets high precision

  • Murfreesboro, Tennessee, United States
  • Jan 30th
CAT40 ER40-70/2-3/4" COLLET CHUCK SET W/ WRENCH, NUT,15PC COLLETS HIGH PRECISION
CAT40 1-1/2'' Caterpillar V-Flange Shell End Mill Holder, #6780-7108

Cat40 1-1/2'' caterpillar v-flange shell end mill holder, #6780-7108

  • TORONTO, ONTARIO, Canada
  • Jan 30th
Accusize Industrial Tools Canada Quality Machine Shop Welcome to Canada Quality Machine Shop. We supply high quality cutting tools, measuring tools, machine tool accessories, etc. at very good price from Toronto, Canada.
DZ BRAND CAT40 5/8" X 3.75" SOLID END MILL HOLDER/ADAPTOR STANDARD PRECISION

Dz brand cat40 5/8" x 3.75" solid end mill holder/adaptor standard precision

  • Murfreesboro, Tennessee, United States
  • Jan 30th
DZ BRAND CAT40 5/8" X 3.75" SOLID END MILL HOLDER/ADAPTOR STANDARD PRECISION
Brown & Sharpe 40-3/16 3/16" End Mill Holder NMTB 40 Taper

Brown & sharpe 40-3/16 3/16" end mill holder nmtb 40 taper

  • Chicago, Illinois, United States
  • Jan 30th
NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 3/16" end mill holder Weldon type shanks 0.812" nose diameter, 1.32" long from the bottom of the flange Overall length 5.1" Overall diameter 2.38" two 0.633" wide cut outs. Shipping: Winner pays actual shipping cost. There is
Putnam 1/2X40 HM403 1/2" End Mill Holder NMTB 40 Taper

Putnam 1/2x40 hm403 1/2" end mill holder nmtb 40 taper

  • Chicago, Illinois, United States
  • Jan 30th
NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 0.5" end mill holder Weldon type shanks 1.382" nose diameter, 2.25" long from the bottom of the flange Overall length 6.15" Overall diameter 2.38" two 0.639" wide flange cut outs. Shipping: Winner pays actual shipping cost. There is
Frizt-Rite 50 CAT x 2" End Mill Holder (CTAM# 7005)

Frizt-rite 50 cat x 2" end mill holder (ctam# 7005)

  • Sicklerville, New Jersey, United States
  • Jan 30th
Frizt-Rite 50 CAT x 2" End Mill Holder With plug ANSI B5.50, Caterpillar "V-Flange" standard, ISO 7388-1, IS 11173 (TC), DIN 69871, NFE 62540. Units built to the international standards (DIN, ISO &
DZ BRAND CAT40 1 1/4" SOLID SIDELOCK END MILL HOLDER 4 1/8" GAGE LENGTH

Dz brand cat40 1 1/4" solid sidelock end mill holder 4 1/8" gage length

  • Murfreesboro, Tennessee, United States
  • Jan 30th
DZ BRAND CAT40 1 1/4" SOLID SIDELOCK END MILL HOLDER 4 1/8" GAGE LENGTH
108 Pc HURCO CAT40 TOOLING PACKAGE~END MILL HOLDERS~COLLETS~RETENTION KNOBS

108 pc hurco cat40 tooling package~end mill holders~collets~retention knobs

  • Murfreesboro, Tennessee, United States
  • Jan 30th
108 Pc HURCO CAT40 TOOLING PACKAGE~END MILL HOLDERS~COLLETS~RETENTION KNOBS
108 Pc HAAS CAT40 TOOLING PACKAGE~END MILL HOLDERS~COLLETS~RETENTION KNOBS

108 pc haas cat40 tooling package~end mill holders~collets~retention knobs

  • Murfreesboro, Tennessee, United States
  • Jan 30th
108 Pc HAAS CAT40 TOOLING PACKAGE~END MILL HOLDERS~COLLETS~RETENTION KNOBS
DZ BRAND CAT40 1/4" X 4" GAGE LENGTH SOLID END MILL HOLDER/ADAPTOR

Dz brand cat40 1/4" x 4" gage length solid end mill holder/adaptor

  • Murfreesboro, Tennessee, United States
  • Jan 30th
DZ BRAND CAT40 1/4" X 4" GAGE LENGTH SOLID END MILL HOLDER/ADAPTOR
DZ CAT40 1/4" SOLID END MILL HOLDER/ADAPTOR HIGH PRECISION BALANCED 12000 RPM

Dz cat40 1/4" solid end mill holder/adaptor high precision balanced 12000 rpm

  • United States
  • Jan 30th
Balanced To: G6.3/12000 RPM Runout: .008mm/.0003in TIR Coolant Though: Yes Gage Length: 63.5mm/2.5in Finish: Black Oxide Material: Hardened Alloy Steel Rear Thread: 5/8-11 Taper: CAT40 Brand: DZ - Alloy Steel Hardened to 50-52 rc
DZ BRAND CAT40 1" X 1.75" SOLID END MILL HOLDER / ADAPTOR STUB LENGTH

Dz brand cat40 1" x 1.75" solid end mill holder / adaptor stub length

  • Murfreesboro, Tennessee, United States
  • Jan 30th
DZ BRAND CAT40 1" X 1.75" SOLID END MILL HOLDER / ADAPTOR STUB LENGTH
DZ BRAND CAT40 ER16-100 / 4" COLLET CHUCK INCLUDES ER16 NUT

Dz brand cat40 er16-100 / 4" collet chuck includes er16 nut

  • Murfreesboro, Tennessee, United States
  • Jan 30th
DZ BRAND CAT40 ER16-100 / 4" COLLET CHUCK INCLUDES ER16 NUT
HPI Pioneer BT40 SX16 Collet Chuck, 5.91" Coolant Thru **NEW**

Hpi pioneer bt40 sx16 collet chuck, 5.91" coolant thru **new**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
You are bidding on a brand new HPI Pioneer BT40 Collet Chuck. This collet chuck is a SX16 series, 0.630" Capacity that utilizes HPI Pioneer SX16 Collets. This tool is Coolant Thru the center.
Command CAT 50 C6E4-1000

Command cat 50 c6e4-1000

  • Rochester, Indiana, United States
  • Jan 30th
This is a Command Tooling Systems CAT 50 C6E4-1000 end mill holder. This has been used

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies