+ Post new Ad

CT Tapers & Holders

The average price for current category was $305.53 last month.

There are 4191 ads in this category.

SANDVIK CAPTO C3 RUBBERFLEX COLLET TAP CHUCK W/ CAT 50 ADAPTER

Sandvik capto c3 rubberflex collet tap chuck w/ cat 50 adapter

  • Cleveland, Ohio, United States
  • Jan 30th
SANDVIK TAP CHUCK PART NO. 391.60A-01 060 A CAT 50 CAPTO C3 ADAPTER Very good used condition. Actual item pictured.
COMMAND CAT 50 BILZ #1 RIGID TAP DRIVER STOCK #G2-12

Command cat 50 bilz #1 rigid tap driver stock #g2-12

  • Cleveland, Ohio, United States
  • Jan 30th
COMMAND RIGID TAP DRIVER USES BILZ #1 TYPE TAP ADAPTERS CAT 50 SHANK Good used condition, actual item pictured. Payment due within five days of purchase. Check, m/o, credit card, and PayPal accepted.
CAT V40 Shell Mill Holder, 1” Pilot, 5/8”-11 Thread, USA, New.

Cat v40 shell mill holder, 1” pilot, 5/8”-11 thread, usa, new.

  • Tucson, Arizona, United States
  • Jan 30th
CAT V40 Shell Mill Holder, 1” Pilot, 5/8”-11 Thread, USA, New: This is a new V40SM-100 shell mill holder. The box is dirty from storage. It was made in the USA and private labeled for Kit Horton Tooling.
Lyndex BT50 Bilz Extension Compression Tap Driver

Lyndex bt50 bilz extension compression tap driver

  • Uxbridge, Massachusetts, United States
  • Jan 30th
This is a New Lyndex brand extension compression tap driver that accepts a #2 series Bilz style tap holder. Number on unit is BT50-TP3B-2-150 MC. This is new and unused.
UP TO 6 CAT 40 TAPER 45° SHORT RETENTION KNOBS

Up to 6 cat 40 taper 45° short retention knobs

  • Rochester, New York, United States
  • Jan 30th
This is a Auction for up to 6 Cat 40 45° Retention Knobs with through coolant hole. Each bid is for ONE Retention Knob. Thread = 5/8"-11 Black oxide finish for the best combination of accuracy and durability.
HAAS CAT 40 5/8" END MILL HOLDER 0.625 CT STUB

Haas cat 40 5/8" end mill holder 0.625 ct stub

  • Wadley, Alabama, United States
  • Jan 30th
HAAS CAT 40 5/8" END MILL HOLDER 0.625 CT STUB
KENNAMETAL CAT40 TG100 COLLET CHUCK CV40TG100300

Kennametal cat40 tg100 collet chuck cv40tg100300

  • Wadley, Alabama, United States
  • Jan 30th
KENNAMETAL CAT40 TG100 COLLET CHUCK CV40TG100300
BIG CAT40 TG100 COLLET CHUCK CV40-CC1.00-5.00

Big cat40 tg100 collet chuck cv40-cc1.00-5.00

  • Wadley, Alabama, United States
  • Jan 30th
BIG CAT40 TG100 COLLET CHUCK CV40-CC1.00-5.00
KENNAMETAL CAT40 TG100 COLLET CHUCK CV40TG100400

Kennametal cat40 tg100 collet chuck cv40tg100400

  • Wadley, Alabama, United States
  • Jan 30th
KENNAMETAL CAT40 TG100 COLLET CHUCK CV40TG100400
Briney CAT 40 5/8" End Mill Holder Marked V40E-062-600. Used

Briney cat 40 5/8" end mill holder marked v40e-062-600. used

  • Lake Village, Indiana, United States
  • Jan 30th
Briney CAT 40 5/8" End Mill Holder Marked V40E-062-600. Used Used condition, I don't see any damage on holder You get it just as you see in the pictures Posted with eBay Mobile
VALENITE CAT40 TG-100 COLLET CHUCK V40CT-105G-30

Valenite cat40 tg-100 collet chuck v40ct-105g-30

  • Wadley, Alabama, United States
  • Jan 30th
VALENITE CAT40 TG-100 COLLET CHUCK V40CT-105G-30
BIG CAT40 TG100 COLLET CHUCK CV40-CC1.00-3.00

Big cat40 tg100 collet chuck cv40-cc1.00-3.00

  • Wadley, Alabama, United States
  • Jan 30th
BIG CAT40 TG100 COLLET CHUCK CV40-CC1.00-3.00
Lyndex CAT40 JT2 0-1/2"Jacobs Drill chuck #34-02 CT40 (made in Japan & USA)

Lyndex cat40 jt2 0-1/2"jacobs drill chuck #34-02 ct40 (made in japan & usa)

  • Long Beach, California, United States
  • Jan 30th
Used, Lyndex CAT40 JT2 0-1/2"Jacobs Drill chuck #34-02 CT40................(2 available) both in good working condition...... please email any questions, thank you
KENNAMETAL Briney CAT40 CV40 JT2 1/2" Jacobs keyless drill chuck JKP-130-J2 CT40

Kennametal briney cat40 cv40 jt2 1/2" jacobs keyless drill chuck jkp-130-j2 ct40

  • Long Beach, California, United States
  • Jan 30th
Used, KENNAMETAL Briney CAT40 CV40 JT2 1/2" Jacobs keyless drill chuck JKP-130-J2 ...............(2 available) both in good working condition...... please email any questions, thank you
ALBERTI CAT 50 Right Angle / 90 Degree Milling Head, ER25 Collet, T90-2,5

Alberti cat 50 right angle / 90 degree milling head, er25 collet, t90-2,5

  • Lake Village, Indiana, United States
  • Jan 30th
ALBERTI CAT 50 Shank 90 Degree Milling Head, Holds ER25 Collet, Marked T90-2,5. 99260073 used working condition Looks like its been sitting for a few years. Recommend lubercating before using You get it just as you see in the pictures Posted with eBay Mobile
Briney CAT 40 For 1" End Mill Holder Marked V40E-100-600. Used

Briney cat 40 for 1" end mill holder marked v40e-100-600. used

  • Lake Village, Indiana, United States
  • Jan 30th
This holder is clearly marked with the model V40E-100-600 and is available in a used condition. The CAT 40 Briney end mill holder is an excellent choice for holding your 1" end mill. There is no damage visible on the holder, ensuring that it is still in excellent working order.
Valenite CAT 40 5/8 Diameter V40CT-E62

Valenite cat 40 5/8 diameter v40ct-e62

  • Collegeville, Pennsylvania, United States
  • Jan 30th
Valenite CAT 40 5/8 Diameter V40CT-E62
LYNDEX CAT 40 Holder For 3/8" End Mill Used

Lyndex cat 40 holder for 3/8" end mill used

  • Lake Village, Indiana, United States
  • Jan 30th
LYNDEX CAT 40 Holder For 3/8" End Mill Used Used condition, I don't see any damage on holder You get it just as you see in the pictures Posted with eBay Mobile
New Sandvik 392.41021-63 08 080B 5/16 Diameter HSK 63 CNC Tool Holder

New sandvik 392.41021-63 08 080b 5/16 diameter hsk 63 cnc tool holder

  • Collegeville, Pennsylvania, United States
  • Jan 30th
New Sandvik 392.41021-63 08 080B 5/16 Diameter HSK 63 CNC Tool Holder. listing is for 1 holder.
Valenite CAT 40 Holder V40CT-3125-400 & Grooving Mill VSC 5 .122 1.25K

Valenite cat 40 holder v40ct-3125-400 & grooving mill vsc 5 .122 1.25k

  • Lake Village, Indiana, United States
  • Jan 30th
Valenite CAT 40 Holder marked V40CT-3125-400 with grooving Mill marked VSC 5 .122 1.25K Used condition, I don't see any damage on the tools They could use a good cleaning You get it just as you see in the pictures Posted with eBay Mobile

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies