Custom Kegerator/keezer/aquarium Temperature Controller

US $510

  • South Lebanon, Ohio, United States
  • Jun 17th
This is a custom built temperature controller that was built to be used with my Keezer (chest freezer temperature regulated to hold kegs).  This temperature controller can be used on any refrigerator/freezer/aquarium/terrarium where temperature regulation is needed. No need to fuss with wiring, just plug in the unit - set your temperature and forget it! The unit was built with one "switched" outlet (located on the bottom) - used for the keezer plug as well as a "constant" power (located at the top) - used for fans in the keezer for airflow. For example, I can set the temperature to 3.3°C with a deviation of 0.5°C.  Meaning once the temperature reaches 3.8°C the cooling switch will turn on - thus powering the outlet the chest freezer is plugged into - cooling the keg(s).  Once the temperature reaches 2.8°C the power is switch off from the outlet - thus turning off the chest freezer.  The deviation of temperature can be changed to whatever suits your needs.  There is also a compressor delay time built into the controller to ensure the motor does not turn off and on rapidly, which can damage the motor.   Temperature Unit Technical Parameters: 1. Temperature measuring range: -50°~99°C;  2. Resolution: 0.1°C; 3. Accuracy: ±1°C (-50~70°C);  4. Sensor error delay: 1 minute 5. Power supply: 110VAC±10%, 50/60Hz; 6. Power consumption: less than 3W; 7. Sensor: NTC sensor (1PC); 8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC; 9. Ambient temperature: 0~60°C;  10. Storage temperature: -30~75°C;  11. Relative humidity: 20%~85% (No condensate).

Directions

Similar products from Temperature and Humidity Controller Thermostats

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies