cutting tip for sale, brand-new and used.

Brand new, never used 1/4" roundover bit with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/4" rabbeting router bit for rabbeting base and trim up to 1/2 inch high by 1/4 deep, with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/4" roundover bit with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/8" corner beading bit with 1/2" shank. This type of bit is basically a round-over bit with a smaller guide bearing which allows for a ridge detail to be cut on both sides of the round. See attached image and diagram for clarification.

This is a brand new, never used 5/32" radius roman ogee detail router bit with 1/2" shank. Overall diameter is 1-1/16" (11/32" cutting depth) with a 3/8" inch bearing and 2 carbide cutting edges (blades). Roman ogee and other edge detailing profiles are commonly seen on trim edges, and in wood furniture and are produced by running this bit along an edge while the bearing guides the router leaving a detailed edge.

10 pcs 3.175mm 30 Degree Tool-Tip 0.3MM Three Face CNC Router Bits Carbide Cutters Precision Engraving Tools for CNC Machine

- PCD Diamond Tools, Precision Granite Engraving Bits

- PCD Diamond Tools, Precision Granite Engraving Bits

- PCD Diamond Tools, Precision Granite Engraving Bits

6X45 AngleX0.1mm - PCD Diamond Tools, Precision Granite Engraving Bits

10 pcs 3.175mm 20 Degree Tool-Tip 0.3MM Three Face CNC Router Bits Carbide Cutters Precision Engraving Tools for CNC Machine

Description: New 10pcs /lot 10degree 0.5mm carbide PVC PCB Engraving bits Router bit shank dia 3.175mm Specification: Sh

10 pcs 3.175MM Shank, 20Angle, 0.5MM lengthening Flat Bottom CNC Router Tools, Cutting Bits,Carving Tools,V Shape Engraving Bit,PCB Cutters Detailed description: Tool-tip(CED): 0.5mm Shank diameter(SD): 3.175mm(1/8") OVL(TL): 38mm

10 pcs 3.175MM Shank, 15Angle, 0.2MM lengthening Flat Bottom CNC Router Tools, Cutting Bits,Carving Tools,V Shape Engraving Bit,PCB Cutters Detailed description: Tool-tip(CED): 0.2mm Shank diameter(SD): 3.175mm(1/8") OVL(TL): 38mm

10 pcs 3.175MM Shank, 30Angle, 0.3MM lengthening Flat Bottom CNC Router Tools, Cutting Bits,Carving Tools,V Shape Engraving Bit,PCB Cutters Detailed description: Tool-tip(CED): 0.3mm Shank diameter(SD): 3.175mm(1/8") OVL(TL): 38mm

- PCD Diamond Tools, Precision Granite Engraving Bits

Brand new, never used 1/2" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 1/4" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 1/4" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 3/8" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.