BOLT BARN KIT #116 Below is what is included: 23 Hole Plastic Assortment Case Grade 8 "Extra Thick" Flat Washers - Zinc & Yellow Plated SAE Pattern (See attached photos for actual dimensional drawings)
BOLT BARN KIT #114 Below is what is included: 24 Hole Assortment Drawer 2"H x 13.25"W x 9.25"D Heavy Duty Cold Rolled Steel Shell High Impact Polystyrene Insert Durable Baked Gray Enamel Finish
Set of 5 Brand New Dual Wheel Casters 1/4 Inch Diameter Bolt Type Insert---3/4" Shank I have a couple of boxes of these - approximately 400 of these to sell. This auction is for a set of 5. As you can see they have a threaded shank.
Up for bid is an old vintage D Ring Shackle with it's bolt. It measures about 3 1/4 inches wide, and the bolt is about 2 inches long, and about 1/2 inch thick. Light surface rust, see photos.
Steel Shelving Sturdy Storage Rack With 5 Utility Shelves 4000 lbs Capacity This Edsal stockpiling rack has an edge made of steel for quality with a smooth dark completion for imperviousness to erosion, five movable molecule board racks, and a 4,000 lb. limit when the weight is equitably appropriated over all racks. It is suitable for sorting out and putting away things.
System consists of (10) uprights 12'Hx48"D and (32) beams 8'Lx4"W Uprights are Builder Square style and Beams are T-Bolt style (nut and bolt to the uprights) This system can make (2) rows of storage rack each measuring 32' linear feet, each row would have 4 storage bays, 3 storage levels (floor plus 2 shelf levels) for a total of 24 pallet positions. Or you could run in one continuous row measuring approx. 74' linear feet with 9 storage bays for total of 27 pallet positions.
SafeandVaultStore F-2014C Depository Safe The F2014C depository safe is a heavy duty front loading depository safe designed to protect your business. If you have the problem of having large deposits waiting for a bank deposit then this safe could be for you. It is made from solid steel and has locking bolts that will seal the door shut as tight as possible.
SafeandVaultStore F-2014K Depository Safe The F2014K is a B-rated security container that will help your business contain the excess money you have waiting for a bank deposit. This is a top of the line security container, and it gets its "B" rating from the thickness of the door. The door is a whopping 1/2" thick!
**PLEASE NOTE, 1 OF 4 is D-RING ONLY NO WASHER AND NUT, THE OTHER 3 HAVE WASHER AND NUT INCLUDED. ALL BRAND NEW, UN-USED** LOT of 4 Concrete D-Ring Anchors. Brand New.
**PLEASE NOTE, 1 OF 4 ARE D-RING ONLY NO WASHER AND NUT, THE OTHER 3 HAVE WASHER AND NUT INCLUDED. ALL BRAND NEW, UN-USED** LOT of 4 Concrete D-Ring Anchors. Brand New.
ELESA Threaded bolt spring plungers Brand New Code: HN.933592/HN.933591 Description: AN 615.1-5/8-11; hardened steel bolt, SS spring, with locking patch Dimencions: d = 5/8-11 L= 1.07 d1 = 0.31 L1 = 0.25 Spring pressure: 2 LBF - Preload, 10.5 LBF - Max. load Thanks for taking the time to look at our item.
4"-8 TPI BOLT THREAD TAP- NEW NEW Manufactured in Poland 6 Fluted Tap- 4"-8 Tap is GH10 Hardness Bolt Thread Tap Tap is High Speed Steel Tap Still Has Protective Casing This Listing is for the 4"-8 Six Fluted Tap
1 1/8" - NS 8 - N 8 TPI BOLT THREAD TAP - NEW NEW Manufactured by Butterfield 4 Fluted Tap 1 1/8" - NS8 Tap is GH-5 Hardness Bolt Thread Tap Tap is HSG This Listing is for a 1 1/8" NS 8 Butterfield Four Fluted Tap
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.