d shaft for sale, brand-new and used.

?????

?????

?????

?????

175 RPM Large Gearhead Motor - 12V DC - High Torque - 6mm D Shaft New gearhead motor Operates on 4 – 12 VDC 175 RPM at 12V No load current at 12V: 80mA Stall current: 1,100 mA Speed is proportional with voltage (Speed range is 55 RPM @ 4V to 175 RPM @ 12V) Very high torque output, shaft is very difficult to stop by fingers even at just 6V D-Type Shaft dimensions: 27 mm Long x 6 mm Diameter Motor dimensions (not including shaft): 84 mm Long x 4

10 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 10 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

5 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 5 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

100 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 100 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

?????

Powerful little 12v motor for many hobby applications. Motor comes with a V-Groove pulley for use with O-Ring belt or can be removed for straight shaft connection. Rubber grommet on output end was apparently a motor mount and can also be removed.

This is a brand new, in the crate 25HP, 900 RPM, 326T, 230/460V, 3 phase electric motor with full factory warranty. It is a premium motor with a nice array of bells and whistles that you wont find on lower cost motors. We also offer VFDs, pumping unit design D motors, softstarts and more.

Electric Motors : Explosion Proof : Three-Phase : Explosion Proof - NEMA Premium

Inventory #: MOT3314 Manufacturer: Baldor HP: .75 Frame: 184 Enclosure: XPFC Voltage: 208/220/440 AC/DC: AC Phase: 3 RPM: 850 Model/Catalog #: M7012 Amps: 3.8-3.6/1.8 Description: Hazardous Location Motor Hz: 60 Shaft Size (in.): .85 No box, old stock, Suitable for use Class I Group D, Non standard shaf

This listing is for a brand new LEESON 1/2HP Agricultural Fan Duty Resilient Base motor #111321 . This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.

Here is a good Scott Electric Motor, 90 volt D C Permant Magnet Motor with 5/8" shaft. This 1800 rpm motor is continuous duty, 1/2 hp. Many used including back gauges on paper cutter, exercise equipment and many more.

Baldor electric servo motor, catalog #BSM100B-2250AAX, BSM100B-2250AA, S4P004W031G1, spec #S4P004W031G1, new spec #S4P100W031G1, rated speed 1200rpm, with resolver, with thermostats, servo motor, 230/460volts, 1200 rpm, 3 phase, 60 hz, TENV, 3ph, 230/460vac, Baldor, BSM100B-2250AA, continuous stall torque 12nm, torque cont. stall 12nm, current cont, stall 6.08 amps, rated buss voltage 300vac, rated speed 1200rpm, peak current 16 amps, Cont.

Dayton Fan Motor, 1/3 HP, 1100, 115 V, 48YZ, TEAO - 4ETE5 Air Circulator Motor Air Circulator Motor, Permanent Split Capacitor, Totally Enclosed Air-Over, 1/3 HP, Nameplate RPM 1100, Voltage 115, Full Load Amps 4.2, 60 Hz, 1 Phase, NEMA/IEC Frame 48YZ, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number of Speeds 2, Yoke/Stud Mounting, Sleeve Bearings, Auto Thermal Protection, Rotation CCWLE, Body Dia 5 5/8 In, Length Less Shaft 6 5/8 In, Shaft Dia 5/8