DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 0

DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 1

DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 2

DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 3

DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 4

DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 5

DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 6

DAHLKE NEW MILLENNIUM 6" GOLD DREDGE, US $8,195.00 – Picture 7

Dahlke New Millennium 6" Gold Dredge

US $8,195.00

Sealy, Texas, United States
Jan 30th

Open on mobile:
QR code

NEW MILLENIUM 6" SUCTION DREDGE Our New Millennium dredge line is a conventional-design machine with many exclusive features not offered by any other manufacturer. The New Millennium line is now available from 3" thru 10". Here are a few features that set our products apart from the others: Oversize flotation: Because some miners work in white water, we have built oversize float modules with large molded-in tool boxes, built-in rigidity, and high laminar bow. No tools needed: NM dredges assemble and disassemble without the need of hand tools. Tee lock tensioners, hitch pins & snap pins lock the units together. A complete 6" dredge can be assembled in less than TEN minutes! Fully adjustable: All New Millennium dredges feature our exclusive 3-point mount system. The recovery tray pivots on the center member and is suspended by chain on the stern allowing easy slope angle adjustments. The venturi barrel flare seals in the head of the recovery tray while the manifold suction end is suspended by a stem that can be raised or lowered, and locked instantly in the desired position with the tee lock. This boom-up feature contributes to easy relocations while dredging in very shallow or white water conditions. The power module, consisting of engine, pump, and compressor, slides on the mounting rails and locks into position at all four corners allowing easy fore to aft trim adjustment. NM 6": 9 HP ROBIN SUBARU, DP500 jetting pump, Dahlke compressor, 20’ hose kit, HD swivel suction nozzle, 75"L x 22"ID recovery tray complete - $8,195.00 ** Option for New Millennium machines: Frame-mounted divers air reserve tank, powder-coated brackets, stainless bands, whip hose to compressor W/quick disconnects, pressure relief pop-off valve and high quality adjustable 2nd stage regulator w/ 25' of breathing air hose. Complete package - $445.00 Fit & Finish: Our fabrications are finished so the miner will not receive cuts from sharp edges. All steel parts are powder-coated or zinc-plated for years of corrosion-free use. Quality is our number one goal! Warranties: All of our dredges are covered by the Dahlke Five Year Warranty. Fabricated and welded hardware and Dahlke Pumps are warranted for 5 years to be free from flaws in workmanship. Warranties shall apply only to the original purchaser and shall not under any circumstances exceed the original purchase price of the dredge. Any warranties, either implied or expressed shall not cover normal wear and tear or abuse. Note: Dahlke 3.3 Air Compressor is manufactured at our facility located just outside Houston Texas. The compressor bracket is cast from A356 Aluminum and then heat treated to a T-6 condition at a foundry located in Houston. We assemble the compressor with a 316 stainless steel main shaft, 3 sealed roller bearings, stainless steel valves and cast aluminum head. All fasteners are torqued to factory recommended specs. by our craftsmen. The Dahlke 3.3 Compressor is rated at 3.3 cubic feet per minute at 90 psi and is drilled and tapped to match a Gast 263 compressor mounting footprint. The mounting bracket footprint also includes two 3/8-16 drilled / tapped mounting holes to use a simple "squash-plate" style mounting system. High performance and simplicity when you need it most! This compact, single cylinder, oil-less divers air compressor smokes the competition! Trident Welding / Dahlke Dredge may, at its discretion substitute suction and intake / discharge hoses for the NM 6" dredge based upon availability. All hose will be of "like" quality and will function as intended. We reserve the right to modify and upgrade our products as we see fit. If you have questions please don't hesitate to contact us before you purchase! All Sales are final. Thanks very much! NOTE: We do not offer the Thomas 80 Air compressor even though it is shown in the stock picture in this listing. We no longer use the "soda can" air reserve tanks shown in the attached listing pictures. We have changed styles as described above. CAUTION: Trident Welding LLC / Dahlke Dredge accepts no responsibility or liability for the use of this product by the purchaser. Dredging for gold can be dangerous and improper use of this equipment could result in injury and / or death. SAFETY FIRST! The NM 6" dredge must ship on a freight truck or be picked up on a "will call" basis at our manufacturing facility. Trident Welding LLC/ Dahlke Dredge will crate and palletize your new dredge for a $200.00 time and material fee. Upon customer request, Trident will obtain a freight shipping quote for pick up and delivery to your location. We will provide this QUOTE-ONLY free of charge. The purchaser is responsible for all shipping charges related to transport of the dredge to your final destination!

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	DAHLKE DREDGE
Country/Region of Manufacture	United States
Model	NEW MILLENNIUM 6"