dayton blower motor for sale, brand-new and used.

DAYTON 4M176 DIRECT DRIVE BLOWER MOTOR 1/8HP 1050 RPM 115V 1PH 60HZ END OPEN CW SHAFT END SHADED POLE 1 PH SELF ALIGNED BEARINGS 1/2" X 5" SHAFT NEW IN BOX

This blower is new but the end was modified as shown on the pictures. Basically the "lip" was cut down. We ended up not using it after the modification.

Sale is for (1) NEW DAYTON 4C659B TUBEAXIAL FAN BLOWER 12" 4C659 FITS PAINT BOOTH EXHAUST FAN This is new out of box This is missing the mount where the motor goes you can make on or get one from Dayton but it comes as shown It does come with the belt guard kit shown

DAYTON 1/70HP FAN/BLOWER MOTOR TYPE:SHADED POLE RPM:1550 115V PH:1 NIB

This is a new Blower with motor included. The Blower specs are listed in the Item Specifics. The motor is a Dayton 3HP, open drip proof, three phase.

Auction is for one new Dayton 3M714J as pictured.

Brand new, never used at all. specs: Mfr. Model # 3M778A UNSPSC # 26101602 ItemHVAC Motor Motor ApplicationHVAC/R Motor Sub ApplicationDirect Dr Fan/Blower Motor TypeShaded Pole EnclosureOpen Air-Over DutyContinuous HP1/20 Nameplate RPM1550 Voltage115 Frame3.3 Service Factor1.0 Full Load Amps1.8 Hz60 RotationCWSE Insulation ClassB Max.

Dayton Split Phase 1/3 HP Motor – Model 5K917BA 1/3 HP motor for fans, blowers, pumps, and other uses.

For auction is a used Dayton fan motor Model 3M582A This looks similar to a Century model 4UU94 but with a longer shaft and the mounting studs to the front like the 4UU91. this motor runs fine and does not overheat. specs are 1/15 HP 2 1/4" x 3 7/8" mounting 5" in diameter.

BRAND NEW IN MANUFACTURER BOX AS ALWAYS...FAST, FREE AND SAFE SHIPPING TO THE LOWER 48 STATES

Dayton 4C131A Blower with a Lesson motor in it High Pressure Belt Drive Radial Blade Blower, Wheel Diameter 13 1/2 Inches, Wheel Width 4 3/8 Inches, Shaft Diameter 1 Inch, Inlet Diameter 8 Inches, Outlet Height 7 1/8 Inches, Outlet Width 5 3/4 Inches, Overall Height 26 Inches, Overall Width 25 Inches, Overall Depth 23 Inches, MOTOR IS BLOWN Sold as is, where is, without warranty. Pickup hour are from 7-3:30

Like new motor. Doesn't have mounting hardware. Direct Drive Blower Motor.

UP FOR SALE BLOWER WITHOUT MOTOR , HERE ARE THE SPECS : Type Wall Mounted Venturi Propeller Dia. (In.) 18 CFM @ 0.000-In. SP 3231 CFM @ 0.125-In.

UP FOR SALE BLOWER WITHOUT MOTOR , HERE ARE THE SPECS : Type Less Motor Wheel Dia. (In.) 9 Max. Inlet Temp.

Technical Specs

This MADE IN USA motor is fully functional. It has been cleaned and re-oiled. It has low hours as a fan motor.

Technical Specifications click to collapse contents Item # 4M205 Mfr. Model # 4M205 UNSPSC # 26101602 Cat

Dayton 1/2 HP motor works and runs excellent. Please see pictures and feel free to ask questions prior to bidding. Good luck

Product Details This motor is for OEM and replacement use in air-over fan and blower applications such as bathroom fans and range hoods. Technical Specs ItemHVAC MotorMotor ApplicationHVAC/RMotor Sub ApplicationDirect Dr Fan/BlowerMotor DesignShaded PoleMotor Enclosure DesignOpen Air-OverDutyContinuousHP1/100Nameplate RPM3000Voltage115Frame3.3Motor Service Factor1.00Full Load Amps0.60Hz60Motor Shaft RotationCWSEIns. ClassBMax.