Here are five new old stock Sprague Monolithic Ceramic capacitors .068uf at 50V 3/8" wide x 3/16" tall with 2 1/8" radial leads Monolithic - A capacitor that consists of thin dielectric layers interleaved with staggered metal-film electrodes; after leads are connected to alternate projecting ends of the electrodes, the assembly is compressed and sintered to form a solid monolithic block.
Here are five new old stock Sprague Monolithic Ceramic capacitors .0068uf 50V 3/8" wide x 3/16" tall with 2 1/8" radial leads Monolithic - A capacitor that consists of thin dielectric layers interleaved with staggered metal-film electrodes; after leads are connected to alternate projecting ends of the electrodes, the assembly is compressed and sintered to form a solid monolithic block.
Here are five new old stock Sprague Monolithic Ceramic capacitors .1uf 50VDC 20% 3/8" wide x 3/16" tall with 2 3/16" radial leads Monolithic - A capacitor that consists of thin dielectric layers interleaved with staggered metal-film electrodes; after leads are connected to alternate projecting ends of the electrodes, the assembly is compressed and sintered to form a solid monolithic block.
Here are five (only two pictured) new old stock ITW (Illinois Tool Works) PP Polypropylene guitar tone capacitors .01uf at 100V 5/8" long with 1 7/8" axial leads These are great for humbucker or single coil equipped guitars, or for any audio application like crossovers or amplifiers. These are replacement upgrade mods for humbucker equipped guitars Sounds great on the neck pickup
Here are four (only two pictured) new old stock United Chemi-Con Aluminum Axial-Lead Electrolytic capacitors 47uf 35V 5/8" long by 5/16" diameter with 1.25" axial leads No leakage at all and are within spec Great for crossovers, amps, the cathode bypass capacitor on preamp tubes, anywhere Free USPS shipping in the USA Worldwide
Here are five (only three pictured) new old stock ITW (Illinois Tool Works) Poly Film capacitors .01uf at 100V 1/2" long with 2" axial leads These are great for humbucker or single coil equipped guitars, or for any electronic application like crossovers or amplifiers. These are replacement upgrade mods for humbucker equipped guitars Sounds great on the neck pickup
Here are five (only three pictured) new old stock ITW (Illinois Tool Works) PP Polypropylene guitar tone capacitors .01uf at 100V +/-10% 1/2" long with 1 7/8" axial leads These are great for humbucker or single coil equipped guitars, or for any audio application like crossovers or amplifiers. These are replacement upgrade mods for humbucker equipped guitars Sounds great on the neck pickup
Here are five (only three pictured) new old stock ITW (Illinois Tool Works) PP Polypropylene guitar tone capacitors .01uf at 200V +/-20% 7/16" long with 1 7/8" axial leads These are great for humbucker or single coil equipped guitars, or for any audio application like crossovers or amplifiers. These are replacement upgrade mods for humbucker equipped guitars Sounds great on the neck pickup
NEW OLD STOCK DAYTON 1/3 HP ELECTRIC MOTOR MODEL 3M834 (GRAINGER NUMBER) MOTOR TYPE: PERMANMENT SPLIT CAPACITOR ENCLOSURE: TOTALLY ENCLOSED SPEED: SINGLE RPM: 1075 VOLTAGE: 115 HERTZ: 60 PHASE: SINGLE FULL LOAD AMPS: 4.2 FRAME: 48Y MOUNTING: MOUNTING STUDS THERMAL PROTECTION: AUTO RESET INSULATION CLASS: B
AVAILABLE FOR SALE GENERAL PURPOSE MOTOR HERE ARE THE SPECS : Motor Design Capacitor-Start Motor Enclosure Design Open Dripproof HP 1/3 Nameplate RPM 1140 Frame 56 Voltage 115/208-230 Hz 60 Phase 1 Full Load Amps
AVAILABLE FOR SALE MOTOR HERE ARE THE SPECS : Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Type PSC Enclosure Open Air-Over HP1/4 Nameplate RPM 1075 Voltage208-230 Full Load Amps 1.7-1.6 Hz
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.