dayton grinder for sale, brand-new and used.

You are bidding on a Dayton 2Z491E 1/4" collet die grinder.  This tool has been used, but is still in good working order.  This tool shows cosmetic wear from normal use, but none of the wear effects normal use.

var itemNumber = window.ebayItemID ?

Dayton Heavy Duty Bench Grinder Model 1Z7061/3 Hp3450 RPM115 VAC Single PhaseExcellent Condition

THANK YOU FOR THE GREAT RESPONSES TO THE AMK-77 !!!! The AMK-77 Knife 2" X 72" Belt Grinding System, ideal for knife making and general fabrication. This grinder competes with the many machines on the market that cost much, much more.

YOU ARE BIDDING ON A USED DAYTON 1/3 HP BALL BEARING BENCH GRINDER IN VERY GOOD CONDITION. THE GRINDER HAS SOME COSMETIC BLEMISHES AND A MINOR DENT ON THE TOP, BUT IS IN VERY GOOD CONDITION. THE GRINDING WHEEL IS NEW, THE WEILER WIRE BRUSH IS ONLY SLIGHTLY WORN AND THE PLASTIC FACE SHIELD HAS BEEN REPLACED.

DAYTON 4TJ95A BENCH GRINDER BUFFER 8 INCH 3/4 HP 3450 RPM 120V 7/3.5 AMP 60HZ  IN GOOD STRONG AND SMOOTH RUNNING CONDITION --INCLUDES 2PADS  SHOWN --39.95 SHIPPING LOWER 48 STATES ONLY PAYPAL PAYMENT

var itemNumber = window.ebayItemID ?

"DAYTON" Mobile/Portable Dust Collector Single Stage (3AA28)

You are bidding on a USED DAYTON 1/3 hp, Model 5K586, electric motor. 1/3 hp cyc 60 volt 115 amps 6.6 rpm 3450 PH 1 frame 48 part no. S55BJK-1305 This was wire up to make sure it works....it runs great,quiet.

NO RESERVE THIS auction for 1-pc: TDRSRD, TDR/SRD DRILL GRINDER SHARPENER/POINTER, DG 76M, with extra grinding wheels, Drill/Cutter/Tool/End mill. The sharpening machine comes with 7 extra grinding wheels ($17 each new) and an attached corresponding v-block. The unit works great, sharpen a couple bits and you be able to set-up and sharpen a drill bit, from .060 to .750 (1/16" inch to 3/4" inch) in diameter,

This is a complete set of the wheels to build your own 2” x 48” or 2” x 72” belt knife grinder. This listing includes: One - 4” drive wheel with a bore sized for a 5/8" (.625”) drive shaft with a 3/16” keyway. It is also broached to use with keyed shaft or can be used with a smooth shaft with a flat ground on it for the set screw.