dayton wiring for sale, brand-new and used.

new old stock dayton AC gearmotor this older 2Z849 is obsolete and replaced by 4FDZ2, unit is electrically reversable by changing wiring taps in motor unit has 5/8" dia output shaft w/keyway data sheet below http://www.grainger.com/product/DAYTON-AC-Gearmotor-151-to-200-RPM-2Z849 shipping weight 25lbs LOCATION: 8684 130A-3 SDPP GTC TERMS: items are sold AS-IS / as described.

WE ARE SELLING A USED DAYTON AC GEARMOTOR PARALLEL SHAFT 115/230 VOLTS AC 156RPM MODEL# 6Z822A WITH AN ATTACHED GEAR, !! THIS MOTOR IS MISSING THE COVER PLATE TO THE WIRING I DO NOT HAVE THAT AVAILABLE!!! Item AC Gearmotor Type: Parallel Shaft Voltage Rating: 115/230 Phase: 1 Hz: 60/50 Shaft Orientation: Parallel Nameplate RPM: 156 Full Load Torque (In.-Lbs.): 60 Overhung Load (Lb.): 175 Input HP: 1/6 Gear Ratio: 11:1 Full Load Amps: 2.1/1.1 Enclosure: TEFC Thermal Protection: None Ambient

DAYTON ELECTRIC WALL/HANGING UNIT HEATER 102,300BTUH, MODEL 3UF95A , 30-KW, 240/480-VAC@60Hz, CONTROL:24VAC, 0.57AMPS. AIR RISE@OUTLET DEGREES FAHRENHEIT, AIR FLOW-2100/1800 CFM, HORIZONTAL AIR THROW 50 FEET, MAX CURRENT RATING:36AMPS, 3-PH. DIMENSIONS:WIDTH=13", HEIGHT:27", LENGTH:29-1/2".

A nice used DAYTON Hazardous Location motor with a cast iron pump ( Sta-Rite CI-236B) I believe is cast into the head. Dayton 1/2 HP, continuous duty, 115/230 volt. ( I am not sure which phase the wiring it is set up on currently) 3450 RMP Full disclosure: this was used in a groundwater remediation setting ( gasoline) and the pump should be fine for irrigation or other generally non-potable use.

DAYTON CONDENSER FAN MOTORMODEL: 3M997AAPPLICATION: HVAC/RHP: 1/2RPM: 1075FRAME: 48YZVOLTAGE: 208-230/460HERTZ: 60PHASE: 1FULL LOAD AMPS: 3.0 - 2.8 / 1.4

eBay Template v2.5

var itemNumber = window.ebayItemID ?

This assembled, I/O cable is a 50 pin centronics connector , that can be used on most Mitsubishi Industrial type robots. Including any CR1 thru CR2B-574 type controller. (email if not sure)?

/*

1/2hp 1750 RPM 56C Frame 90 Volt DC Electric Motor with Control Product Description Adjustable Speed Motor, Motor Type Permanent Magnet DC, 1/2 HP, Enclosure Totally Enclosed Fan-Cooled, Nameplate RPM 1750, Input Voltage 115VAC, 56C Frame, Mounting C-face with Removable Rigid Base, 1.0 Service Factor, 5.0 Full Load Amps, Insulation Class F, CW/CCW Rotation, Output Voltage 90VDC, Thermal Protection None, Ambient Temperature 40 Degrees C, Ball Bearings, Shaft Dia.

Vintage Dayton Power C380C 1HP Electric motor single phase 115/230V, 3450 RPM 10" tall. 13" long. 7" wide.

Rockwell - Delta Sander / Grinder Model 31-520 S/N EX6913. Good working order. This is a 240/480 volt 3 phase motor.