Dc 10-55v 50a Lcd Pwm Dc Motor Speed Controller Timing Reversible Remote Control

US $28.59

ShenZhen, China
Jul 25th

Open on mobile:
QR code

Features Intelligent LCD screen with backlight can display working time, speed percentage, current mode, forward rotation, reverse state, etc. Equipped with wireless remote control Multiple limit modes are available Slow start and slow stop time can be set The upper limit and lower limit of the speed can be set The total working time can be set Support two-speed control of forward rotation speed and reverse rotation speed separately Two modes of manual and automatic are optional. Automatic mode is fully automatic forward and reverse within the set time Touch switch to switch forward and reverse rotation, jog acceleration and deceleration, solve the problem of traditional potentiometers easily broken Product parameter Input voltage: DC10-55V (the specific voltage is equal to the rated voltage of the motor) Output voltage: linear under load Instantaneous current: 50A Continuous current: within 30A Forward and reverse: support Wirelessremote control: Yes Timing timing: Yes Limit function: Yes Slow start and slow stop: Can be set Digital speed display: 0-100 percentage meter Speed regulation type: current regulation speed regulation method: jog +- Speed adjustment range: 0-100% control frequency: 15KHZ Wiring type: Barrier terminal block Support motor: brushed motor Module size: length * height * depth 105mm*70mm*95mm product net weight: 275 grams Panel opening: length * width 98mm*63mm installation method: embedded Long press the MENU button to turn off the backlight If you need reverse start, press FWD/REV reverse start Note: The input must be divided into positive and negative. The input voltage must be equal to the rated voltage of the motor (within 10-55V) For example, the rated voltage of the motor is 12V and the voltage of the governor is 12V. The rated voltage of the motor is 36V and the voltage of the governor is 36V. It will burn if you enter 220V The wiring of the two-wire three-wire limit switch is as shown in the figure below. Supports normally open mechanical switch NPN type photoelectric switch Metal proximity switch Hall magnetic control switch 0-1-2-3-4-5-6-7-8-9-E functions are set as follows Manual automatic mode selection function 0: 1 is manual mode 2 is automatic mode The default is 1 manual mode. Slow start time setting Function 1: 000-100 The slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second. Slow stop time setting Function 2: 000-100 The slow stop time is adjustable between 0-10 seconds. The default is 1 second. Speed lower limit setting function 3: 000-080 The minimum speed is adjustable between 0-80% and less than the maximum speed setting value. The default is 0. Speed limit setting function 4: 000-100 The maximum speed is adjustable between 0-100% and is greater than the minimum speed setting value. The default is 100%. Acceleration and deceleration value setting Function 5: 001 002 005 010 015 020 025 Each time you press the plus and minus key, the speed changes accordingly by 1%, 2%, 5%, 10%, 15%, 20%, 25%. Motor running time setting Function 6: 0 seconds minimum -999 hours 59 minutes 59 seconds maximum The default is 0 hours, 0 minutes, 0 seconds, no timing function. The following function 7.8.9. is the time setting in the fully automatic mode Forward rotation time setting Function 7: 0 seconds minimum -999 hours 59 minutes 59 seconds maximum The default is 10 seconds Stop time setting Function 8: 0 seconds minimum -999 hours 59 minutes 59 seconds maximum The default is 10 seconds Reversal time setting function 9: 0 seconds minimum -999 hours 59 minutes 59 seconds maximum The default is 10 seconds Limit mode selection Function E: E1 Infinite position Default infinite position E2 Press to start the motor forward rotation, forward rotation to the positive limit, the motor stops, press the forward and reverse keys to reverse the start E3 Press to start the motor forward rotation, forward rotation to positive limit motor reverse rotation, reverse rotation to negative limit motor stop E4 Press to start the motor forward rotation, forward rotation to positive limit, the motor reverse rotation, and cyclical work Manual and automatic mode selection Press the MENU button 1 to display 0 to enter the manual and automatic mode selection 1 is manual mode 2 is automatic mode Press the plus and minus keys to switch, press RUN/STOP to save and exit Slow start time setting Press the MENU key 2 times to enter the function 1 setting key surface Press the plus and minus keys to set the time Press RUN/STOP to save and exit (10 is 1 second 100 is 10 seconds) Slow stop time setting Press the MENU key 3 times to enter the function 2 setting key surface Press the plus and minus keys to set the time Press RUN/STOP to save and exit (10 is 1 second 100 is 10 seconds) Speed lower limit setting Press the MENU key 4 times to enter the function 3 key surface, press the plus and minus keys to set, press RUN/STOP to save and exit Speed limit setting Press the MENU key 5 times to enter the function 4 key surface Press the plus and minus keys to set the size value Press RUN/STOP to save and exit Acceleration and deceleration value setting Press the MENU key 6 times to enter the function 5 key surface Press the plus and minus keys to switch Press RUN/STOP to save and exit Motor running time setting Press the MENU key 7 times to enter the function 6 key surface The default is the maximum time 0 hour 0 minute 0 second FWD/REV key switch hour minute second Press plus or minus to adjust hour, minute, second, press RUN/STOP to save and exit Function 7 Forward rotation time setting in fully automatic mode Press the MENU key 8 times to enter the function 7 key surface, the default is the maximum time 0 hour 0 minute 10 seconds FWD/REV key switch hour, minute, second Press plus or minus to adjust hour, minute, second, press RUN/STOP to save and exit Function 8 Stop rotation time setting in fully automatic mode Press the MENU key 9 times to enter the function 8 key surface, the default is the maximum time 0 hour 0 minute 0 second FWD/REV key switch hour, minute, second Press plus or minus to adjust hour, minute, second, press RUN/STOP to save and exit Function 9: Reverse time setting in fully automatic mode Press the MENU key 10 times to enter the function 9 key surface, the default is the maximum time 0 hour 0 minute 10 seconds FWD/REV key switch hour, minute, second Press plus or minus to adjust hour, minute, second, press RUN/STOP to save and exit Function E limit mode selection E1 E2 E3 E4 Press the MENU key 11 times to enter the function E key surface, the default is E1 unlimited digits Press plus and minus to switch E1 E2 E3 E4 Press RUN/STOP to save and exit E2 function: Press to start the motor and rotate forward, and rotate to the positive limit, and the motor stops. Press the positive and negative keys to reverse and start E3 function: Press to start the motor forward rotation, forward rotation to positive limit motor reverse rotation, reverse rotation to negative limit motor stop E4 function: Press to start the motor forward rotation, forward rotation to positive limit, the motor reverse rotation, cyclical work PaymentDelivery detailsReturnsAbout usContact usPayment Payment must be received within 5 Days from the date of purchase. Bidding is a contract, Please only purchase if you are intending. All no pay bidders will result in a non-paying buyer alert from eBay. Please leave note in orders when making the payment if you have any special request (colors/address). Orders will be processed instantly and dispatched in same day normally, so we do not accept any Email/Message note before or after you place orders. Delivery details Item will be shipped within 5 business day ( Excluding Weekends and Public Holidays) after your payment clears. We ship the items to your address provided on ebay. All the items will be checked before shipped out.Please rest assured that quality is ensured. We send to USA , 8-25 working days. UK / Auatralia / Canada ,15-35 working days. Europe , 15-35 working days. Other Countries, 20-45 working days. We can also provide express post by EMS (4-15 days) or DHL (4-8 days) . The cost is higher than standard postage, about 25USD or higher. If you want post by EMS or DHL, please contact us.Very reasonable shipping fee will be charged. Returns Products may be returned for refund or replacement within 30 days of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Prior to any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise. We will employ every resource to ensure that your return is processed promptly and without hassle. Please contact us for any product or service issues before escalating to eBay for solution. Notice: Please keep it in good condition, and buyer should pay for return shipping! About us We can supply a wide range of products to meet the ever-changing market demands. Customized orders are welcomed.Our products sell well in North America, West Europe and Australia. Our company insists on the principle of "Good service, the best quality and competitive price". We are increasingly expanding international markets based on quality products, excellent service, reasonable prices and timely delivery. Please contact us at any time for more information. Contact us Welcome to wholesale and purchase,If you have any question ,Please contact us first. We will reply you within 24 hours.(except weekends and holidays). Our normal business hour is Monday to Saturday 9AM to 9PM Beijing Time. All emails and orders will NOT be processed during weekends and holidays. We will leave positive feedback to buyer as soon as buyer pays for the item.We hightly appreciate that you can contact with us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible. a href="https://www.ebay.com/itm/234044827126" target="_blank">

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded
Voltage	DC10-55V
MPN	Does Not Apply
Country/Region of Manufacture	China
Power Source	DC
UPC	Does not apply