This is a used HEWLETT PACKARD 4262A LCR METER for sale. It was recently purchased from a working laboratory. This machine powers up when plugged in and turned on, but beyond that there has been no further testing.
1-1/2-horsepower, one-phase, 115/230-volt motor is permanently lubricated, totally enclosed, and fan-cooled Features 4-inch and 6-inch diameter dust ports 7.36-cubic-foot bags collect particles 30 microns and larger
You are viewing a military surplus dc-dc power supply nsn 5895-01-422-0562. It appears unused in the original box but has been handled. Priority insured shipping included free in the US.
This is a near new Fluke 787 high performance Process Meter with original manual in plastic and test leads! This process meter gives you the measurement capabilities of a Fluke reliable Digital Multimeter plus the ability to source, simulate, or measure DC current with 1 microamp resolution and accuracy of 0.05%. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications.
This item is a used Fluke 787 ProcessMeter that been Calibrated to NIST standards on Feb 07, 2015 with data. Includes Fluke leads with clips, certificate of calibration with data, and 90 day warranty. All pictures are of the actual unit.
Fluke 376 True RMS AC/DC Clamp Meter iFlex® Flexible Current Probe expands the measurement range to 2500 A AC CAT IV 600 V, CAT III 1000 V True RMS AC voltage and current for accurate measurements on non-linear signals Min, max, average and Inrush recording to capture variations automatically Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings You can measure around awkward
I-14-1FLUKE The item you are bidding on is a Fluke 376 True RMS 1000A AC/DC Clamp Meter with iFlex The item is new in an opened package. The package does have some slight damage. - 1000 A ac/dc current - iFlex flexible curremt probe measures to 2500 A ac- Intergrated low pass filter
JFW Rotary Attenuator Pair 0- 50 dB in 10 dB steps & 0 -10 dB in 1 dB Steps (Total attenuation: 60 dB) 0-10 dB Attenuator: Part Number :JFW 50R-310 SMA VSWR: 1.2:1 dc - 1000 MHz / 1.5:1 1000 -2700 MHz Rotation: Attenuator increases in clockwise direction Impedance: 50 Ohms Operating Temperature: -20 degrees C to + 85 degrees C Indexing: 30 degrees with stops at minimum & maximum Power Rating: 2 watts
This is a fully functional Valhalla 2555A AC/DC Current Calibrator. The Valhalla 2555A AC-DC Current Calibrator is a transconductance amplifier that converts an ac or dc voltage to a proportional ac or dc current. A two volt input produces a full range output.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.