Screen Printing DIY Hobby kit This is a new CHEAP silk screen printing kit for your DIY printing business. It is minimal investment but you can do a complete hobby printing, at the same time, the kit is also profitable, you can earn pennies when you are having fun. You will NOT find a cheaper and better kit than this one on Ebay! So why do you still hesitate? Just have a try! Note: If you are International customer out of Canada or USA, please contact with us for consulting the detailed shipping information. Instructions You need some simple household tools like a light to expose (the effects are good may need a longer time). • 1 T-shirt print board-----no need to find a table, anywhere to print. • 1 pre-stretched sturdy aluminum frame-----longevity and high quality. • 1 13" squeegee-----applying the ink and emulsion film easily. • White paste and transparent base-----mix with the color pigment to be the printing ink. • 10 sheets of transparency films-----to print your design on. • 2 sheets of emulsion sheet-----to make the plate, please see the following detailed instruction. • Screen printing degreaser and autoprep-----applying the emulsion film (stick to the screen firmly). • Print board adhesive-----hold the garments in the right position (apply hundreds of printing). • Screen frame hinge clamp-----connect the print board and the frame with 2 bolts. • 5 colors of the pigment-----applying different designs. • 2 stainless steel spatulas with plastic handle-----applying printing ink easily. If you want to make the plate with solvent resistant emulsion instead of the emulsion sheet, please contact us. Emulsion Sheet Application Method 1. PREPARE SCREEN: Make sure the screen is clean and free of dust and oil, if you want better effect, you can use asc365 special liquids to get mesh dull for easier attaching. Spray the screen with water. It should be completely soaked, but not dripping. Asoyou can use a spray bottle to wet screen. 2. APPLY EMULSION TO SCREEN: Apply the dull/sticky side to the back of the wet screen. You can roll the emulsion sheet, apply front part, then roll down the whole sheet. There are two sides to the sheet, one shiny and one dull. If you can’t tell which is which, wet your fingers and touch the corner. The sticky side is the dull side. Run squeegee over the shiny surface of the emulsion, then another size, the last time is back to shiny surface. TIP: Inspect front of the screen for any bubbles or dry areas. Dry areas will have a spiderweb pattern. Use spray bottle with water to lightly mist any dry areas. If three times is not good, you can keep squeegeeing both sides of screen to eliminate excess water prior to drying. As to drying, you can use hair dryer, because of mesh humidity, environment, and dryer power, distance to screen, here we suggest 10-20 minutes, and for better result, you can choose our special drying cabinet, setting time is 20-30mins,temperature is 50°C(122°F).After emulsion has dried, remove plastic film. Package included: 1)1 17"*21"(45cm*55cm) screen printing board (009001) 2)2 screen frame butterfly hinge clamp (009022) 3)1 10.5"x15" Pre-stretched Screen Frame with 120# Fabric (007246) 4)1 13"(33cm) squeegee (007307) 5)1 bottle of White Paste (500g) (008243) 6)1 bottle of Transparent base (500g) (008253) 7)10 sheets of A4 transparency film (007003) 8)1 bottle of screen printing degreaser (008512) 9)1 bottle of screen printing autoprep gel (008522) 10)2 sheets of 17.7"*19.7" emulsion sheet (008502) 11)1 bottle of print board adhesive (008450) 12)2 stainless steel spatulas with plastic handle (007018) 13)1 bottle of Scarlet Pigment (008050) 14)1 bottle of Medium Yellow Pigment (008051) 15)1 bottle of Blue Pigment (008052) 16)1 bottle of Green Pigment (008053) 17)1 bottle of Black Pigment (008054) 01) Item# Description QTY Unit Note 009001 17"*21" Screen Printing Board 1 Pc 02) Item# Description QTY Unit Note 009022 Screen Frame Hinge Clamp 2 Pc 03) Item# Description QTY Unit Note 007246 10.5"x15" Pre-stretched Aluminum Frame with 120# Fabric 1 Set 04) Item# Description QTY Unit Note 007307 13"(33cm) Squeegee 1 Pc 05) Item# Description QTY Unit Note 008243 White Paste - 500g 1 Bottle 06) Item# Description QTY Unit Note 008253 Transparent Base - 500g 1 Bottle 07) Item# Description QTY Unit Note 007003 A4 Positive Film 10 Sheet 08) Item# Description QTY Unit Note 008512 Screen Printing Degreaser 1 Bottle 09) Item# Description QTY Unit Note 008522 Screen Printing Autoprep Gel 1 Bottle 10) Item# Description QTY Unit Note 008502 17.7"*19.7" Emulsion Sheet 2 sheet 11) Item# Description QTY Unit Note 008450 Print Board Adhesive 1 Bottle 12) Item# Description QTY Unit Note 008050 Scarlet Pigment - 200g 1 Bottle 13) Item# Description QTY Unit Note 008051 Medium Yellow Pigment - 200g 1 Bottle 14) Item# Description QTY Unit Note 008052 Blue Pigment - 200g 1 Bottle 15) Item# Description QTY Unit Note 008053 Green Pigment - 200g 1 Bottle 16) Item# Description QTY Unit Note 008054 Black Pigment - 200g 1 Bottle 17) Item# Description QTY Unit Note 007018 Stainless Steel Spatulas with Plastic Handle 2 Pc
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.