US $25.30
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Unbranded |
| Cooling method | natural cooling | ||
| MPN | Does Not Apply | ||
| Use occasion | avoid dust, oil mist and corrosive gas | ||
| Output current | 1.0A to 4.2A, 8 levels adjustable, 0.5A resolution | ||
| Use temperature | 0 to +50 | ||
| Drive mode | dual-machine constant current PWM drive output | ||
| Environmental humidity | <80%RH, no condensation, no frost | ||
| Insulation resistance | > 500M under normal temperature and pressure | ||
| Product size | 115*76*34mm/4.53*2.99*1.34" | ||
| Insulation strength | 500V/min at normal temperature and pressure | ||
| UPC | Does Not Apply | ||
| EAN | Does Not Apply |
Directions
Similar products from Stepper Motor Driver Boards & Modules
High Quality ESP8285 Module Serial WiFi Transmission Module Built-in 32-bit
4 Pieces 2/5/10/15/20mm Countersink Bore Set Round Shank Chamfer Drill Bit - as
Dual Motor Driver Module Board H-bridge DC MOSFET IRF3205 3-36V 15A Peak30A
Wantai Stepper Motor Driver DQ2522MA 110-220V 7.0A,for Engraving machine
1PC NEW KEYENCE KV-N40DT PLC Module#B11D CL
25CM PCB Ruler Measuring Tool PCB Reference Ruler For Electronic Engineer
3Pcs KY-004 Tactile Switch 3 Pins Breakout Board Module Sensor for
USED Stepsyn 103H5505-70E1 Stepper Motor
Upgraded 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board and Offli
micro drive, enclosed, 120 VAC, 1/2hp with 1-phase
XD-39 PWM To Voltage Volt Converter
DIN Rail Module High Quality Pcb Carrier Terminal Blocks Module Brass For Width
Parker CPLX57-120 Compumotor Plus Indexer Stepper Servo Motor Drive Controller
Parker CPLX83-150 Compumotor Plus Indexer Stepper Servo Motor Drive Controller
Board DIN Rail Module 2 In 8 Out DIN Rail And Panel Mounting Power Distribution
DIN Rail Mount Module 2 In 8 Out DIN Rail And Panel Mounting Power Distribution
Pack Of 3 Stepperonline Nema 23 CNC 4 Wire Bipolar 2.8A Stepper Motors 269oz.in
AUTONICS MD5-HF14 Stepping Motor Driver,6 11/16"x 1 11/16"
Red L298N DC Motor Driver Module Stepper Motor Drive Dual H Bridge Max 20W SET
Vexta Stepping Motor 2-Phase 1.8deg/step PH296-02 DC 5.5V 1.25A
People who viewed this item also vieved
STEARNS FORCING CIRCUIT CLUTCH RECTIFIER #4-3-00115-12
SQUARE D ELECTRICAL INTERLOCK N.O. & N.C. 9999SX8 NEW IN BOX
8536SEO1H10 Square D, AC Magnetic Starter NEMA 3 **** NEW****
WARNER ELECTRIC PRECISION TORK CLUTCH 0.5-5.0 LB-IN MC3
Daedal MC1000 Controller Stepper Motor Indexer
Brooke Corporation Production Motors 5RK-40GK-CE- No Reserve
Allen Bradley N44 Overload Thermal Unit Heating Element Lot 7
Dremel Model 219 New In Box Solid State Variable Motor Speed Control
Ktron Gravidrive 2401-600470- Used
New Hoffman VariFlow Fan Speed Control Part# 706-FFS-TB2 12 amp
Favored CCM6D DC10-36V 15A PWM HHO RC Motor Speed Controller Module Switch
NEW ORIENTAL MOTOR SPEED CONTROL MOTOR AND CONTROLLER 100-115 VAC USM425-402W
DC Motor Speed Controller Adjuster DriverHX-PWM AC180V-260V to DC0-220V 4A 500W
BALDOR BC140 DC MOTOR SPEED CONTROLLER, 1/100 - 2 HP
USED Allen Bradley 100-A38NZ*3 Contactor 100-A38NZ3
Marray electric transfer hinges. New. Schlage. von duprin.
190-A11-11 Ser A ALLEN BRADLEY 190 A11 11
NEW SQUARE D 9998 MF-1 COPPER POWER CONTACT KIT FOR 2 SINGLE POLE NEMA SIZE 4
NEW SQUARE D COIL 51156-081-57, NEW
Square D Thermal Unit -- B1.30 -- New
SQUARE D Nema Size 0 Starter 8536-SBO2V01
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies