Draft Beer Taps & Towers (Draft Beer Distribution) for sale, page 56

Seattle, Washington, United States
Jan 31st

Pyramid Expresso Stout Tap Handle Used Overall in good condition, no blemishes or cracks Height 10" High bid pays for shipping, Paypal only.

Draft beer tower with 6 shanks and 6 faucets (no handles included)

San Diego, California, United States
Jan 31st

This has been in use at my house for over 20 years. First in my bar in the living room, then after a remodel put it directly on top of a large chest freezer and set the temp to 34F and was up and running. Very nice unit.

Krome beer tower with beer dispenser

Maplewood, New Jersey, United States
Jan 31st

This tower has never been used. 12" high, comes with Krome beer dispenser.

Perlick 8 tap draft tower

Fort Mill, South Carolina, United States
Jan 31st

Perlick Draft Tower with 8 Perlick taps. All the lines are there including the copper cooling lines. I'm including the drain with it.

Two beers brewing co tap handle

Seattle, Washington, United States
Jan 31st

Two Beers Brewing Co Tap Handle Used Overall in good condition, no blemishes or cracks Height 10 1/2" High bid pays for shipping, Paypal only. In 2007, Two Beers Brewing Head Brewer Joel VandenBrink turned his hobby into his passion. After several years of homebrewing in his kitchen – with nothing more than a five-gallon stockpot – Joel took a leap of faith.

Keg tool dornelius draft beer dispensing equipment

Buffalo, New York, United States
Jan 31st

KEG TOOL DORNELIUS DRAFT BEER DISPENSING EQUIPMENT..opener?

Carbo draught nitrogen generator & mcdantim gas blender in one system

Goodyear, Arizona, United States
Jan 31st

Draft beer nitrogen generator system that also blends Co2 and Nitrogen with McDantim blender 60% Co2 and 25% Co2 inside all in one system. The generator cycles every 2 minutes producing nitrogen that goes into the white holding tank until the pressure reaches 125. You get a back up switch with nitrogen regulator and 2 Co2 regulators on switch valve.

Vintage solid brass beer tap beer keg tap commercial industrial u.s.a.

Reading, Pennsylvania, United States
Jan 31st

UP FOR AUCTION ONE SOLID BRASS BEER TAP MADE IN CLEVELAND,CROME OR NICKEL PLATED. UNIT WEIGHT IS 2-3/4 POUNDS. SOLD AS IS.

Perlick chrome plated draft beer faucet spout tap bar kegerator 408x

Garden Grove, California, United States
Jan 31st

New Perlick Beer Tap without box. Perlick part # 408X. Standard tap with standard fitting.

Manitowoc 5 tap beer tower kit (5trbss) 3 regulators and fob detectors

Essex Junction, Vermont, United States
Jan 31st

I bought this kit off Craiglist 3 years ago from a Restaurant equipment reseller, I never ended up building my kegerator so *as far as I know* the equipment has NEVER BEEN USED. It has however been removed from its packaging and shuffled around so there may be a few minor scratches, but the tower is has a brushed look so if there are cosmetic issues they are barely noticeable. It has most of what you need to build a Kegerator minus the chest freezer/air tank and fittings.

Perlick stainless steel tap draft beer tower with glycol dispensing lines

Montague, Michigan, United States
Jan 31st

Perlick beer tower with Becker creaming faucet. 3 inch diameter, 16 inches tall. Nice used condition, glycol chilling circuit, insulated column.

Kronenbourg beer tower 3 tap bier

Savannah, Georgia, United States
Jan 31st

Large 3 tap tower in good condition. There are a few small chips. No cracks.

Draft beer single faucet tower black metal 2.5" inches in diameter

Berkley, Massachusetts, United States
Jan 31st

Looking for a stylish single faucet tower for your draft beer system? Look no further than the BLACK METAL Draft Beer Single Faucet Tower! Boasting a sleek black finish and measuring 2.5 inches in diameter, this tower is sure to impress your guests.

Draft beer faucet - chrome plated - stainless steel lever (new) (micro-matic)

Gurnee, Illinois, United States
Jan 31st

Draft beer towers and faucets or keg stands with two taps or tap handles each

Logan, Utah, United States
Jan 31st

Bar fresh! There's a pair of dual faucet beer taps. These are the real deal.

Four keg couplers or taps for home brew, kegerator, or the bar sankey parts

Logan, Utah, United States
Jan 31st

Bar fresh! This auction is for four keg couplers. Three are marked with a star only and the gray handled one is marked Sankey Perlick.

Celli custom porclien 3 tap beer tower

Conshohocken, Pennsylvania, United States
Jan 31st

if (swfobject.hasFlashPlayerVersion('9.0.18')) {var headerFn = function() {var att = { data:'http://www.billboardspm.com/viewer/ViewerApplication.swf', width:'840', height:'280' }; var par = { flashvars:'docId=-3455209892439600687&docType=header', wmode:'transparent', allowScriptAccess:'always', align:'middle', scale:'noScale' }; var id = 'billboardsHeaderContent'; var myObject =

Single tap chrome draft beer tower for keg

Gainesville, Georgia, United States
Jan 31st

Description This is a Chrome Plated Metal Single Column, Single Faucet Draft Tower. This tower comes complete with one chrome-plated faucets with a black lever and a 5' length of 3/16" clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.

Taprite low pressure replacement gauge mpn 624

North Bend, Ohio, United States
Jan 31st

This Taprite high quality gauge measures the pressure going into the keg. * Gauge reads 0-60 LBS & 0-4 BAR * Right hand thread * 1/4" MPT thread stem * Accuracy + or - 1.6% Fits regulators with 1/4" pipe thread bodies. Manufacturer Part Number 624.

3 piece plastic airlock (sold in sets of 3)

New York, New York, United States
Jan 31st

3 Piece Plastic Airlock (Sold in sets of 3)