drill collet for sale, brand-new and used.

Carbide Endmill 5 MM for Aluminum | 3 flute Center Cutting Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 5 MM Overall Length: 50 MM Flute Length: 13 MM Carbide grade: YG8

Carbide Endmill 1/4 .250 | TiAin Coated | 4 flute Center Cutting 50 PCS Diameter: 1/4 .250" Overall Length: 2" Flute Length: 5/8" Carbide grade: YG8 Coating: TiAIN 50 Piece includes case Check out my other Solid Carbide endmills & drill and save on shipping with combined purchases. Click here

Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 6 MM .236" Overall Length: 50 MM Flute Length: 16 MM Carbide grade: YG8 Coating: None 25 Piece includes ca

Carbide Ball Endmill 4 MM | TiAin Coated | 5 PCS This Carbide Ball endmill is great for 3D profiling or where a round surface is required. Radius: 2 MM Shank Diameter: 4 MM Flute Length: 8 MM Overall Length: 50 MM Carbide grade:&n

Carbide Endmill 3/16" for Aluminum| 3 flute Center Cutting Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 3/16" .1875" Overall Length: 2" Flute Length: 5/8" Carbide grade: K30 Micrograin Coating:

Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 6 MM .236" Overall Length: 50 MM Flute Length: 16 MM Carbide grade: YG8 Coating: None 100 Piece include

Solid Carbide 1/8 .125 Endmill | TiAin Coated | 4 flute Center Cutting Diameter: 1/8 .125" Overall Length: 1.5" Flute Length: 1/2" Carbide grade: YG8 Micrograin Coating: TiAIN 25 Piece includes case 3.60$ Each Check out my other Soli

Carbide Endmill 1/4" Long Series for Aluminum | 3 flute Center Cutting 5 PCS Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 1/4" .250" Overall Length: 3" Flute Length: 1 1/8" 1.125" Carbide grade: YG8 C

Carbide Endmill 1/4" Long Series for Aluminum | 3 flute Center Cutting 5 PCS Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 1/4" .250" Overall Length: 3" Flute Length: 1 1/8" 1.125" Carbide grade: YG8

see pix for details End Mills--Read!!!!!!!! I am listing several hundred USA end mills straight from the shop's tool room. I am called them "used" in an abundance of caution because they haven't (or at least as I can tell--and I'm supposed to know about such things) No clamp marks anywhere especially in the Weldon flats, no scratches from collet removal and installation and no swarf.

see pix for details End Mills--Read!!!!!!!! I am listing several hundred USA end mills straight from the shop's tool room. I am called them "used" in an abundance of caution because the haven't (or at least as I can tell--and I'm supposed to know about such things) No clamp marks anywhere especially in the Weldon flats, no scratches from collet removal and installation and no swarf.

see pix for details End Mills--Read!!!!!!!! I am listing several hundred USA end mills straight from the shop's tool room. I am called them "used" in an abundance of caution because the haven't (or at least as I can tell--and I'm supposed to know about such things) No clamp marks anywhere especially in the Weldon flats, no scratches from collet removal and installation and no swarf.

see pix for details End Mills--Read!!!!!!!! I am listing several hundred USA end mills straight from the shop's tool room. I am called them "used" in an abundance of caution because the haven't (or at least as I can tell--and I'm supposed to know about such things) No clamp marks anywhere especially in the Weldon flats, no scratches from collet removal and installation and no swarf.

!!!!! USA Cleveland 1/4 4fl cc end mills 4 available End Mills--Read!!!!!!!! I am listing several hundred USA end mills straight from the shop's tool room.

Solid Carbide 1/8 .125 Endmill Long Series | TiAin Coated | 4 flute Center Cutting Diameter: 1/8 .125" Overall Length: 2" Flute Length: 3/4" Carbide grade: YG8 Coating: TiAIN 2 Piece includes case Check out my other Solid Carbide endmills & drill and save on shipping with combined purchases. Click here Quantity Discounts @ 5 & 25 pcs . See Store for listings.&nbs

Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 6 MM .236" Overall Length: 50 MM Flute Length: 16 MM Carbide grade: YG8 Coating: None 10 Piece includes case 5.20$ Each

Carbide Endmill 6 MM for Aluminum | 3 flute Center Cutting Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 6 MM .236" Overall Length: 50 MM Flute Length: 16 MM Carbide grade: YG8 Coating: None 5 Piece includes case Check out my othe

Solid Carbide 1/8 .125 Endmill Long Series | TiAin Coated | 4 flute Center Cutting Diameter: 1/8 .125" Overall Length: 2" Flute Length: 3/4" Carbide grade: YG8 Coating: TiAIN 1 Piece includes case Check out my other Solid Carbide endmills & drill and save on shipping with combined purchases. Click here Quantity Discounts @ 5 & 25 pcs . See Store for listings.&nbs

Carbide Endmill 1/2 Long for Aluminum | 3 flute Center Cutting Excellent for machining Aluminum. This series is designed with 3 flutes to provide the best chip evacuation + high surface finish to provide the best performance with soft metals. Diameter: 1/2" Overall Length: 4" Flute Length: 2" Carbide grade:

Carbide Ball Endmill R1 | TiAin Coated | 5 PCS This Carbide Ball endmill is great for 3D profiling or where a round surface is required. Radius: 1 MM Shank Diameter: 4 MM Flute Length: 4 MM Overall Length: 50 MM Carbide grade: YG8 Coating: TiAIN 5 Piece includes case Check out