drill collet for sale, brand-new and used.

For sale are 25 new (.1860”) PCB carbide drill bits manufactured by Kyocera Tycom. MADE IN THE USA!

4000-6/50 4000 SERIES ROTARY TOOL KIT DREMEL 4000-6/50 4000 SERIES ROTARY TOOL KIT DREMEL Features

708-479-0062 Contact Us System-4-Set Stryker System 4 Handpiece Set with Attachments

SquareTrade © AP6.0 80 Piece Rotary Tool Kit A 100% BRAND NEW ITEM IN FACTORY-SEALED BOX High Speed Cutting, Shaping, and Polishing YES

Huot Manufacturing Huot Collet Rack for ER/DR/RD 40 Series Collets

This is a used but in good condition coolant through spindle CAT40. This mounts in spindle and a adapter feeds the coolant, the adapter slides into a orifice that would have coolant pressure. The coolant goes through the body and ejects out the collets or with the solid collet through the drill tip.

Solid Carbide 6 MM Long Endmill | TiAin Coated | 4 flute Center Cutting Diameter: 6 MM Shank Diameter: 6 MM Overall Length: 100 MM Flute Length: 20 MM Carbide grade: YG8 Micrograin Coating: TiAIN 2 Piece includes case Check out my other Solid Carbide endmills & drill and save

Solid Carbide 4 MM Long Endmill | TiAin Coated | 4 flute Center Cutting Diameter: 4 MM Shank Diameter: 4 MM Overall Length: 100 MM Flute Length: 16 MM Carbide grade: YG8 Micrograin Coating: TiAIN 2 Piece includes case Check out my other Solid Carbide endmills & drill and save

Solid Carbide 3 MM Endmill | TiAin Coated | 4 flute Center Cutting 5PCS Diameter: 3 MM Shank Diameter: 3 MM Overall Length: 50 MM Flute Length: 8 MM Carbide grade: YG8 Micrograin Coating: TiAIN 5 Piece includes case Check out my other Solid Carbide endmills & drill and

Stryker RemB Electric S

Unbranded 1/4" Collet, 20000 RPM Straight Handle Rear Exhaust Air Die Grinder Collet Size (Inch) 3/8Handle Type StraightSpeed Range (RPM) 18,000 - 24,999 RPMsExhaust Location RearSpeed (RPM) 22000Air Consumption (CFM) 4.00Air Pressure (psi) 90.00Inlet Size (Inch) 1/4MSRP $60.00 item is unused overstock also includes a 1.5-10mm drill chuck attachment. Comes exactly as shown in pictures. Zach-0

For sale is a box of (50) 0.55mm (.0217”) resharpened PCB carbide drill bits manufactured by Kyocera Tycom. These drills have been resharpened by the original manufacturer to their quality requirements. These drills have a printed collet locating ring easy depth control and identification.

Made in the USA! Using the

This is for a good used Mill Drilling attachment. I put air to it and it seems to run fine. Serial Number B913610 3500 Rpm Packaged this unit will weigh about 45 lbs.

Has one heavy Ding that appears to be a grinder mark on the od as shown in picture. A drill seats good on the taper so it functions as it should. I don't have any other quick change tools like this so it needs a new home.

For sale are 2.60mm (.1024") new PCB carbide drill bits manufactured by Kyocera Tycom. These tools are designed for drilling holes in G10 and plastic. Each drill has a printed collet locating ring for easy depth control and identification.

Hard to Find Items at Great Prices