+ Post new Ad

Drill Presses & Spare Parts

The average price for current category was $602.07 last month.

There are 1266 ads in this category.

drill press pulley large multi groove, delta rockwell

Drill press pulley large multi groove, delta rockwell

  • Hopatcong, New Jersey, United States
  • Jan 30th
largest dia is 8 in made from aluminium not zinc balanced , with internal spline, .72 dia 10 tooth spline, with feed pulley attached , could also be used as a speed reducer pulley ball bearing od is 2..42 approx or 50 mm
Drill-press, Jet420F3P

Drill-press, jet420f3p

  • Collbran, Colorado, United States
  • Jan 30th
JET420F3P drill press. Adjust belts for differing drill press speeds. 1/2-inch chuck.
Good Drill Press Walker Quill Spider Pull Down Turn Spin Handle

Good drill press walker quill spider pull down turn spin handle

  • Clare, Michigan, United States
  • Jan 30th
var itemNumber = window.ebayItemID ?
ECCO 1/2" sh. 1/2" 2 flute steel spiral, NOS

Ecco 1/2" sh. 1/2" 2 flute steel spiral, nos

  • Belleville, Wisconsin, United States
  • Jan 30th
This is an ECCO brand HSS two flute down shear spiral bit. The cutting diameter is 1/2" and the cutting length is 1/2". ECCO was in Rockford years ago when Ekstrom was there with their overarm routers.
ECCO 1/2" sh. 3/8" 2 flute steel spiral, NOS

Ecco 1/2" sh. 3/8" 2 flute steel spiral, nos

  • Belleville, Wisconsin, United States
  • Jan 30th
This is an ECCO brand HSS two flute down shear spiral bit. The diameter is 3/8" and the cutting length is 1/2". ECCO was in Rockford years ago when Ekstrom was there with their overarm routers.
CLAUSING 3 SPINDLE DRILL PRESS, MODEL #1635, SERIAL #118950, #118951, #118952

Clausing 3 spindle drill press, model #1635, serial #118950, #118951, #118952

  • Coffeyville, Kansas, United States
  • Jan 30th
CLAUSING DRILL PRESS MODEL #1635 SERIAL #S: 118950, 118951, 118952 3 SPINDLE 3 LEGS ONE PIECE TABLE APPROX DIMENSIONS: TABLE OVERALL LENGTH: 82 1/2" TABLE OVERALL WIDTH: 24 1/2" HEIGHT FROM GROUND TO TABLE: 37" FROM INSIDE TO INSIDE COOLANT DRAIN LENGTH: 78" INCLUDES ALL 3 MOTORS: 1 UKNOWN BRAND & 2 DAYTON JACOBS
12 SPEED 10" DRILL PRESS BENCH TOP 5/8" CHUCK 250-3100 RPM 1/2HP MT2 TAPER 3.5 A

12 speed 10" drill press bench top 5/8" chuck 250-3100 rpm 1/2hp mt2 taper 3.5 a

  • Tampa, Florida, United States
  • Jan 30th
10 in. Bench Mount Drill Press, 12 Speed
Clausing .75HP 15" Drill Press 1759 Table:18" x 12"

Clausing .75hp 15" drill press 1759 table:18" x 12"

  • Spartanburg, South Carolina, United States
  • Jan 30th
Clausing .75HP 15" Drill Press 1759 Table:18" x 12" Specifications Model: 1759
Clausing .75HP 15" Drill Press 1647 Table: 25" x 20.5"

Clausing .75hp 15" drill press 1647 table: 25" x 20.5"

  • Spartanburg, South Carolina, United States
  • Jan 30th
Clausing .75HP 15" Drill Press 1647 Table: 25" x 20.5" Specifications
5 Speed Drill Press Wood Working Drill Wood Zinc Aluminum Steel Iron Drilling

5 speed drill press wood working drill wood zinc aluminum steel iron drilling

  • Columbia, Maryland, United States
  • Jan 30th
5 Speed Drill Press Brand New
Powermatic 1150 / 1150A Drill Press Part - MOTOR MOUNT VARIABLE SPEED

Powermatic 1150 / 1150a drill press part - motor mount variable speed

  • Oceanport, New Jersey, United States
  • Jan 30th
Powermatic Model 1150 / 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape!! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!!!!
Powermatic 1150 / 1150A Drill Press Part - COLUMN / TABLE BASE

Powermatic 1150 / 1150a drill press part - column / table base

  • Oceanport, New Jersey, United States
  • Jan 30th
There are abundant pieces available due to multiple drills being parted out. The bolt spacing is 4 3/4" x 3 1/2". The parts are in excellent mechanical condition and maintain an exceptional appearance.
Powermatic 1150 / 1150A Drill Press Part - LINKAGE VARIABLE SPEED

Powermatic 1150 / 1150a drill press part - linkage variable speed

  • Oceanport, New Jersey, United States
  • Jan 30th
Powermatic Model 1150 / 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape!! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!!!!
Powermatic 1150 / 1150A Drill Press Part - COLUMN LOCK

Powermatic 1150 / 1150a drill press part - column lock

  • Oceanport, New Jersey, United States
  • Jan 30th
Powermatic Model 1150 / 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape!! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!!!!
Powermatic 1150 / 1150A Drill Press Part - HANDLES

Powermatic 1150 / 1150a drill press part - handles

  • Oceanport, New Jersey, United States
  • Jan 30th
Powermatic Model 1150 / 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape!! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!!!!
Powermatic 1150 / 1150A Drill Press Part - COLUMN 3" X 42"

Powermatic 1150 / 1150a drill press part - column 3" x 42"

  • Oceanport, New Jersey, United States
  • Jan 30th
Powermatic Model 1150 / 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape!! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!!!!
Powermatic 1150 / 1150A Drill Press Part - HEAD BELT COVER VARIABLE SPEED

Powermatic 1150 / 1150a drill press part - head belt cover variable speed

  • Oceanport, New Jersey, United States
  • Jan 30th
Powermatic Model 1150 / 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape!! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!!!!
Powermatic 1150 / 1150A Drill Press Part - BODY CAST / HEAD - Rockwell Delta

Powermatic 1150 / 1150a drill press part - body cast / head - rockwell delta

  • Oceanport, New Jersey, United States
  • Jan 30th
Powermatic Model 1150 / 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape!! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part!!!!
INDIANAPOLIS MACHINERY 3 HEAD DRILL PRESS, 1/2HP, 1725RPM, 440V, 56" X 50" X 21"

Indianapolis machinery 3 head drill press, 1/2hp, 1725rpm, 440v, 56" x 50" x 21"

  • Coffeyville, Kansas, United States
  • Jan 30th
INDIANAPOLIS MACHINERY & SUPPLY CO. MACHINE TOOLS 3 HEAD DRILL PRESS NUMBER ON THE HEADS: 18-Z-3296-A APPROXIMATE DIMENSIONS: OVERALL - 56" HEIGHT X 50 1/4" WIDE X 21 1/4" DEPTH TABLE HEIGHT - 35" CENTER OF HEAD TO CENTER OF HEAD - 13" HEAD TO CENTER OF CIRCLE - 4 3/4" WITH (3) WAGNER COPORATION AC MOTORS
IMS 16 Speed Floor Drill Press 110 Volts 12.5 Amps 60 Hz 1 Phase 1720 RPM CG1570

Ims 16 speed floor drill press 110 volts 12.5 amps 60 hz 1 phase 1720 rpm cg1570

  • Friendship, Wisconsin, United States
  • Jan 30th
IMS 16 Speed Floor Drill Press 110 Volts 12.5 Amps 60 Hz 1 Phase 1720 RPM Class A 60 Heat Serial # 524959 MFG Date 1992 58 Capacity 16 mm Model DP16F 62 x 15 x 23 260 lbs W/ Pallet Untested By Us C

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies