+ Post new Ad

Drill Presses & Spare Parts

The average price for current category was $602.07 last month.

There are 1266 ads in this category.

Powermatic 15" Floor Model Drill Press, Model 1150A S/N: 7815S178

Powermatic 15" floor model drill press, model 1150a s/n: 7815s178

  • Archbold, Ohio, United States
  • Jan 30th
Alzmetall Drill Press, Model #: 21835, Type 87 AB3FS

Alzmetall drill press, model #: 21835, type 87 ab3fs

  • Tooele, Utah, United States
  • Jan 30th
Alzmetall Drill Press Model#: 21835 Type: 87 AB3FS Buyer responsible for shipping - Tooele, UT 84074
Delta Rockwell 17-600 17" Drill Press, Variable Speed, 115V, 1-Phase

Delta rockwell 17-600 17" drill press, variable speed, 115v, 1-phase

  • Stone Mountain, Georgia, United States
  • Jan 30th
DRILL PRESS LIGHT LED RING HALO WHITE 4" QUILL BRIDGEPORT MILL MAGNETIC

Drill press light led ring halo white 4" quill bridgeport mill magnetic

  • United States
  • Jan 30th
FEATURES 14 NICHIA SUPER BRIGHT 9800 LEDS INCLUDES A MAGNETIC SWITCH BOX COILED POWER CORD STRETCHES AS YOU PULL DRAW BAR
ROPER WHITNEY # 20 WITH 3/8 PUNCH HAND PUNCH PEXTO TENNSMITH DIACRO

Roper whitney # 20 with 3/8 punch hand punch pexto tennsmith diacro

  • Oceanport, New Jersey, United States
  • Jan 30th
WHITNEY NO. 20 WITH 3/8 PUNCH. GOOD CONDITION NICE AND CLEAN.
BANTAM B4812 PRESS BRAKE 12 TON X 48" FORMOST BRAKE CLEAN ATEC, DIACRO

Bantam b4812 press brake 12 ton x 48" formost brake clean atec, diacro

  • Oceanport, New Jersey, United States
  • Jan 30th
FOREMOST BANTAM PRESS BRAKE B4812 IN VERY GOOD CONDITION. VERY HANDY FOR A SMALL SHOP. RUNS OFF AIR .
POWERMATIC Model 1200 20" Drill Press On Production Table

Powermatic model 1200 20" drill press on production table

  • Archbold, Ohio, United States
  • Jan 30th
ROPER WHITNEY 7 1/2 PUNCH WITH BENCH MOUNT / TABLE PEXTO TENNSMITH DIACRO

Roper whitney 7 1/2 punch with bench mount / table pexto tennsmith diacro

  • Oceanport, New Jersey, United States
  • Jan 30th
WHITNEY 7 1/2 PUNCH WITH BENCH MOUNT AND WORK TABLE. THERE IS A 5/16 PUNCH INSTALLED. THIS IS IN EXCELLENT CONDITION!
ROPER WHITNEY 118 PUNCH W/ TABLE /STRIPPER ARMS/PLATE FENCES PEXTO DIACRO

Roper whitney 118 punch w/ table /stripper arms/plate fences pexto diacro

  • Oceanport, New Jersey, United States
  • Jan 30th
ROPER WHITNEY 118 4.5 TON BENCH PUNCH WITH FACTORY PAINT/STRIPPER ARMS/STRIPPER PLATE /FENCES AND WORK TABLE. THE DIE SHOE IS 2 3/4 .THIS IS IN EXCELLENT CONDITION!
VINTAGE DELTA 17" DRILL PRESS TABLE - FROM A 600 CASTING SERIES DRILL PRESS

Vintage delta 17" drill press table - from a 600 casting series drill press

  • Lebec, California, United States
  • Jan 30th
From an early 1940's era drill press. There are extra holes drilled across the top surface.
VINTAGE DELTA 17" DRILL PRESS STAND & BASE - 1940'S

Vintage delta 17" drill press stand & base - 1940's

  • Lebec, California, United States
  • Jan 30th
This is from an early 1940's drill press. Please contact me for an accurate shipping quote as EBay will not let it go by FedEx which will be cheaper than UPS. Also, this will ship in 2 packages so the EBay is not correct at all.
VINTAGE DELTA 17" DRILL PRESS RAISING MECHANISM - COMPLETE

Vintage delta 17" drill press raising mechanism - complete

  • Lebec, California, United States
  • Jan 30th
This is the complete set-up for raising and lowering the table on an early 1940's era drill press.
VINTAGE DELTA 17" DRILL PRESS QUILL RETURN SPRING - 1940'S ERA

Vintage delta 17" drill press quill return spring - 1940's era

  • Lebec, California, United States
  • Jan 30th
Includes the return spring and front housing. The rear housing is damaged.
3 Spindle Drill Press With (2) Clausing 20" Drill Heads and (1) Powermatic 20" D

3 spindle drill press with (2) clausing 20" drill heads and (1) powermatic 20" d

  • Archbold, Ohio, United States
  • Jan 30th
CLAUSING 15" DRILL PRESS MOTOR 3/4 HP 3 PHASE FITS 15 +16 SERIES PRESS

Clausing 15" drill press motor 3/4 hp 3 phase fits 15 +16 series press

  • Oceanport, New Jersey, United States
  • Jan 30th
CLAUSING DRILL PRESS 15 + 16 SERIES DRILL PRESS 732-642-8271 MOTOR 3/4 HP 3 PHASE 1140 RPM 5/8 SHAFT
GENUINE DIACRO MACHINE STAND FITS MANY BENDER,ROLLER,SHEAR,BRAKE DI-ACRO

Genuine diacro machine stand fits many bender,roller,shear,brake di-acro

  • Oceanport, New Jersey, United States
  • Jan 30th
DIACRO STAND 15W X 20L X 33H FACTORY BROWN PAINT. THIS IS PRE DRILLED TO FIT A VARIETY OF DIACRO MACHINES. GOOD CONDITION.
15" DELTA ROCKWELL 15-665Floor stand 6 SPEED DRILL PRESS 3PH 1175 rpm

15" delta rockwell 15-665floor stand 6 speed drill press 3ph 1175 rpm

  • Willington, Connecticut, United States
  • Jan 30th
Rockwell Delta model 15-665 Floor Standing Drill Press A used machine but still works fine. Needs cleaning and minor adjusting tune up.
REXON RDM-100 A ADJUSTABLE PRESS 115V-AC 1PH 8A AMP DRILL B447535

Rexon rdm-100 a adjustable press 115v-ac 1ph 8a amp drill b447535

  • Buffalo, New York, United States
  • Jan 30th
ROPER WHITNEY DA-2 RIVETER / SQEEZER HAND PUNCH PEXTO TENNSMITH DIACRO

Roper whitney da-2 riveter / sqeezer hand punch pexto tennsmith diacro

  • Oceanport, New Jersey, United States
  • Jan 30th
WHITNEY NO DA-2 RIVETER IN VERY GOOD CONDITION
ROPER WHITNEY PUNCH 7-A WITH 5/16 PUNCH PEXTO TENNSMITH DIACRO

Roper whitney punch 7-a with 5/16 punch pexto tennsmith diacro

  • Oceanport, New Jersey, United States
  • Jan 30th
WHITNEY NO 7-A PUNCH . NEWER STYLE IN VERY GOOD CONDITION

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies