Drilling machine for the beekeeping framework "SSP-3", US $195.00 – Picture 0

Drilling machine for the beekeeping framework "SSP-3", US $195.00 – Picture 1

Drilling machine for the beekeeping framework "SSP-3", US $195.00 – Picture 2

Drilling machine for the beekeeping framework "SSP-3", US $195.00 – Picture 3

Drilling Machine For The Beekeeping Framework "ssp-3"

US $195.00

Novoaltaysk, Russian Federation
Jan 30th

Open on mobile:
QR code

Drilling machine for the beekeeping framework "SSP-3." Instruction manual Please carefully read the instruction manual. Compliance with the instructions contained therein ensure safe operation drilling machine "SSP-3." APPOINTMENT Drilling machine for the beekeeping framework "MSP-3" (hereinafter "machine") is designed for drilling holes in the side rails beekeeping framework Along with high technical performance machine has a number of design features that provide comfort and safety of its operation: A.) Does not require grounding device if the wiring there is a ground wire; B.) The design provides maximum protection from user injury; B.) is convenient for transportation, storage and operation due to optimal dimensions; G.) is designed for drilling of two bars, which contributes to high performance. Warning! Only at the absolute observance of the rules of operation can be reduced be guaranteed safety and performance art ankh. In connection with the ongoing work to improve the machine manufacturer, enhance reliability, operating conditions, the design can be made small changes are not reflected in this instruction manual. Employees of the manufacturer gratefully consider your proposals to improve the machine. SAFETY 1. All work to prepare the machine for operation and maintenance produced when disconnected from the mains plug. 2. Before starting the machine, check the plug and cord for damage. Prior to eliminate damage to the unit operation is prohibited. 3. The machine is connected to an electrical socket and bipolar ground contact at least 16 A. 4. The power cable must not touch the heated surface. 5. Do not operate the machine if there is a smell of burning insulation or a burning odor. 6. When you are finished, the machine must be disconnected from the network. Remember, the machine is a type of electrical appliances running supervision! It is forbidden! i leave the machine unattended plugged in; i operate the machine in areas with explosive and chemically active medium; i used for grounding elements such as water, heating, drainage, metal risers; i when the machine into the grid at the same time touching the machine and devices having a grounding (electricity, gas stoves, radiators heating, tap, metal pipes and sewerage so on.); i troubleshoot included in the electric machine; i admit to operating the machine with the children; i make their own modifications to the device; i include machine in the network at the damaged wiring; i when it detects a fault, disconnect the machine from mains. CAUTION During operation, the machine does not allow an small children! SPECIFICATIONS Rated Power-115 W nominal stress-220 current frequency - 50 Hz capacitor 14mkF spindle speed - 3000 r / min mode - 15 minutes, then 30 minutes break Appliance classes - 1 dimensions - 335h175h180 mm number of cartridges - 4 pcs. the diameter of the drive belt - 118mm recommended drill diameter of 1.5 to 3 mm. PACKAGE 1. Drilling machine for the beekeeping framework "MSP-3" - 1 pc. 2. Owner's Manual - 1 pc. 3. Individual package - 1 pc. 4. Drills - 4 pcs. 5. Driving belts - 2 pcs. GETTING STARTED Before switching on the machine to the power grid is necessary to: 1.) Set the machine to the surface, the height of which will correspond to the comfortable working height for the operator; 2) installation of the machine must be made convenient for operation location. The machine must be installed in a stable horizontal position and secured to the table. Warning! Wire power cable should not be in the area rotating elements of the machine! If the machine was long while at low temperatures, so that following heat it in a warm indoors at least two hours! ORDER OF BUSINESS 1) Adjust the height of the carriage by fitting its lateral screws desired position; 2) Include the "network"; 3.) Insert the "start"; 4.) into the movable carriage two side straps beekeeping frame. if trims have Hoffmann separator, the adjustment screw is adjusted Only the right of the operator's hand, if the separator is not right also screwed position adjustment screw strips; 5.) capture yk azatelnymi fingers of both hands on the handrails of the machine housing, and thumbs - handrails carriage; 6.) to make drilling; 7.) after removal of the drill bars movable carriage machine operation is repeated. MAINTENANCE AND STORAGE To ensure long and reliable operation of the machine must be strictly comply with the requirements of this manual. The supply voltage must be lower than 198 V and no higher than 242 V. The ambient temperature must be between + 10 to +35 Celsius degree. Relative humidity should not exceed 85%. The area around the machine should be free to find in the working area the operating system of a person. The machine must be installed on reliable flat surface, and mounted on the table. Use of the unit must be careful, blows to the body and the machine elements are excluded. All activities associated with the intervention into the machine must carried out by specialists. Keep the machine must be in a room with a temperature of not less than 5 and not more than Celsius degree 45 Celsius degree

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Country/Region of Manufacture

Russian Federation