dual shaft motor for sale, brand-new and used.

UP FOR AUCTION: FASCO BLOWER MOTOR 7187-0132 3-SPEED, DUAL-SHAFT, 60/50HZ, 1.7 AMP NEW - NEVER USED A BIT DUSTY FROM SITTING AROUND AS THEY OPENED EVERY BOX.

UP FOR AUCTION: A.O. SMITH UNIVERSAL MOTOR F48V56A01, 3-SPEED, 1550 RPM, DUAL-SHAFT USED, BUT READY TO GO. TESTED & GUARANTEED!

DESCRIPTION: For sale in good used condition is a Charlynn Hydraulic Motor, item weights 16 pounds in a box. SPECIFICATIONS: Part # 103-1001-007 S Series 3.6 Cube, 15 GPM, 864 RPM Max PSI: 2000 Mount: 4 Bolt Shaft: 1" Keyed Dual Rotation Ports: 1/2" NPT 14 day warranty

New IMP 1100 Ice Machine Pump Rebuild Kit - Whirlpool, Frigidaire, York, Carrier, Scotsman, McQuay, Manitowoc.Whirlpool, Frigidaire, York, Carrier Dual Voltage 115/230V Ball Bearing Motor o1) 50/60Hz Stainless Steel Shaft o1) Auto. Thermal Reset Box was bumped/damaged so the white plastic cup was cracked. All other parts are new and ready for your next pump rebuild.

Universal Strong High Power 8 Meter Drainage Pump for Air Conditioner & Drain Hose 10 Meter Excellent performanced, Convenient to install and operation! *220V / 150W* The dual structure of the water tank: prevent moisture condensation

include("http://t.pushauction.com/e

This is a nice strong running used Dual Voltage AC Vintage Powr-Kraft 1/2 Horsepower Electric Motor.Made by Oak Electric Motors Inc. Burr Oak Michigan USA It is model 15YOB...1/2 Horsepower 1725 RPM 60 HZ single phase 115/230 Volt wired 115 6.0/3.0 amp. Clockwise (Right handed) rotation at shaft end Wear and tear rust dust and dirt but in good working good condition.

This is a used Dual Shaft 1/3 Horsepower Delco Electric Motor from a Wood Lathe It is SOLD AS IS----it runs strong but makes some noise when starting and stopping--brushes worn??? This is not perfect but PRICED ACCORDINGLY!!! Both shafts are 1/2" diameter --round.

Used in working condition12/24V DC Motor2.3 Amps3600 RPM @ 12VPrimary Shaft dim. 4.75mm x 18mmSecondary Shaft dim. 4.75mm x 13mmMotor dim.

Vintage Powr Kraft Wood Lathe Motor 1/2 HP 1725 RPM Montgomery Ward YWL 4658-B In good working condition, but show signs of use, scuffs, paint loss and other surface marks. Dual shaft 1/2" and 5/8". Please view all the pictures carefully before bidding.

12 volt DC gear motor, 75 RPM, 1.5 " OD, 4.8" length, Shaft 3/8" w/ dual flat, .9" long. New condition, out of box. 4 bolt flat face mount on .75" centers.

New in working condition12V DC Motor(very powerful)4 BrushDual Shafts: Smooth with brake1900RPM @ 12VUnit Diameter: 2.5" (62.68mm)Unit Over All Length: 5.17" (131.15mm)Primary Shaft: 10mm x 23mmComes with Stearns 12V Failsafe Brake(brake releases upon energizing)Missing one small cap screw on brake housing(does not effect performance)

Used in good working condition24V DC Motor(4 brush-very powerful)Dual Shafts: Smooth3000 RPM @ 24V Amps: 10Unit Diameter: 2.75Unit Over All Length: 3.7"Primary Shaft: 1/2" (12.7mm) x 1" (25mm) w/flatSecondary Shaft: .375 ( 9.5mm) x 1/2" (12.75mm)

Electric Induction Motor 1/3HP 120/220Volts Dual Voltage 60hz 7/3.5 amps 5/8" shaft Brand New!

I've got 3 Nema 23 stepper motors of 425 oz-in with dual shaft and 8-wires. Taken from a running CNC router machine. 1/4in shaft on both sides8-wire motors425 oz-in1/4in flat, both sides I believe it's currently wired in Bipolar Parallel.A+ Blue & RedA- Yellow & BlackB+ Brown & WhiteB- Orange & Green Each motor weighs ~4 pounds Contact me if you have any questions