LIGHT SOCKET WITH BULB FOR 115V CLARKE EDGERS Fits Super E, Super 7, Super 7R, Super 5, and others PART # 46902A, 40920A A replacement socket... and a bulb! NOTE: Socket works for either 115V or 230V models; however, the bulb works only for 115V.
PAPER CLAMPING BOLT AND WASHER FOR CLARKE SUPER 7, SUPER 7R EDGERS PART # 960140, 980132, and cotter pin I also carry these items for Clarke B2 and Silverline SL7 edgers (part # 85715A, 62411A) Features: Stainless steel bolt for cor
LIGHT BULB SOCKET FOR CLARKE B2 EDGERS INCLUDES B2+, B2 DC, B2+DC Original Clarke part. Includes one bulb and the mounting screw. These parts are for 115V models only.
COMPLETE CASTER/WHEEL ASSEMBLY FOR CLARKE B2 EDGERS REPLACES CLARKE PART # 12203A NOTE: Clarke includes the bearing (part # 51128A) with the 12203A assembly. We do not. However, you can purchase the bearing separately for only $19.50, for a total of $47.50.
CASTER SWIVEL BEARING FOR CLARKE B2 EDGER PART # 51128A NOTE: This edger takes ONE bearing per shaft (two bearings total for each sander). This is not the same bearing as is used in the wheels. Each wheel takes two bearings, part # 50740A, which we also carry.
PAPER CLAMPING BOLT AND WASHER FOR CLARKE B2, SILVERLINE SL-7 EDGERS PART # 85715A, 62411A, and cotter pin I also carry these items for the Super 7 and Super 7R edger (part # 960140, 980132) Features: Stainless steel bolt for corrosion resistance
PAPER CLAMP WASHER AND BOLT FOR CLARKE SE7/CE7 EDGERS These edgers can be used two ways: with hook and loop discs, or with plain paper discs using this clamp. Perhaps you've been using the hook and loop, and you'd rather use the cheaper plain discs, but you've lost track of the clamp that came with your edger. We also carry the self-adhesive hook and loop replacement disc
SANDING DISC FOR CLARKE CE7, SE7 EDGERS The metal disc with hook material attached. Also included are the 6 mounting screws (a Clarke retail value of $38.40 by themselves!) Related part: The hook and loop pad 39864A is also available separately.
HOOK-AND-LOOP SANDING PAD FOR CLARKE CE7, SE7 EDGERS Self-adhesive; easy to mount to the metal disc. TIP: Removing the entire assembly and immersing in boiling water will likely make the removal of the old pad much easier.
MOTOR BRUSH SET OF 4 FOR CLARKE C-5 EDGERS REPLACES CLARKE PART # 330902 These brushes are no longer supplied by Clarke. They are very hard to find anywhere. As far as we know, these brushes fit only the C-5.
PAPER CLAMP WASHER AND BOLT FOR CLARKE C-5 EDGERS The C-5 is the only edger we know of that uses this left-hand paper clamp bolt. We also carry C-5 brushes and brush springs, part # 330902 and 168324 (find them
RUBBER BASE PLATE BUMPER FOR OBS-18 or -18 DC PART # 31224B (replaces 31224A) The bumper prevents damage to walls, trim, etc; if you are using a dust skirt, it provides a better dust seal and makes things much quieter!
REBUILD KIT FOR CLARKE OBS-18 AND OBS-18 DC PAD DRIVER GRIP FACE, RUBBER SPRING KIT (4), AND BEARING CLARKE PART # 39730A (previously 32519A), 50736A and 10666A Brand new pad driver grip face, set of 4 rubber springs, and a high quality double-sealed bearing.
6" BACKER PADS FOR CHERRYHILL FLOOR SANDERS: U-SAND, PRO, SUPERBEE CHERRYHILL PART # BP6 Authentic Cherryhill backer pads. This listing is for FOUR pads, enough to equip one machine. (Also available individually.) Tip: You'll need a 3/4" open end wrench (or adjustable wrench or pliers) to hold the s
SET OF 4 6" BACKER PADS + 4 BACKER PAD SAVERS FOR CHERRYHILL FLOOR SANDERS: U-SAND, PRO, SUPERBEE CHERRYHILL PART # BP6 Authentic Cherryhill parts. This listing is for FOUR pads and pad savers, enough to equip one machine. (Pads are also available individually.)
Pad Driver Plate Bearing Retaining Ring with Screws FOR CLARKE OBS-18 and OBS-18 DC Part # 66981A Includes the retaining ring and three screws as pictured. A 5/32 allen wrench is required for installation.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.