Electrical Discharge Machine Tools (Tools for Specific Machines) for sale, page 39

Edm pallets - 50mm x 50mm x 10 mm - 2 threaded holes

Bloomfield, Connecticut, United States
May 25th

EDM pallets - 50mm x 50mm x 10 mm - 2 threaded holes. There is 9 pieces in this lot. The units are in good cosmetic condition, and come as shown in the photo.

Er-017532 erowa slotted compact holder 3r, hirschman, meca, edm

Aurora, Illinois, United States
May 25th

This is an Erowa Compact slotted holder that is in great shape and works just fine. Forget new pricing, this is a FRACTION of new! Don't look at just this listing, I have a ton of other used tools that are priced just as well as this one is!

Hirschmann h2060.13 wire edm rail

Salisbury, North Carolina, United States
May 25th

I have had 2 of these for many years and only use one . The one I use, I wire EDM'd into 2 shorter rails that are very nice for putting parts out in the middle of the travel where I can put parts either parallel or perpendicular to the rails. Of course you can use it to span a larger machine table as it is.

Sodick a320d-awt cnc wire edm

Columbia, SC, United States
May 25th

SpecificationDescription X-Axis Travel 12.59" Y-Axis Travel 7.88" Z-Axis Travel 6.88" Auxiliary Axes (U&V) 1.96" x 1.96" Distance Floor To Table Top 35.83" Wire Tension .44 to 6.16 Wire Feed Speed (Max.) 9.8" Wire Diameter .0004 to .012

Hansvedt sm-150b sinker edm

Almont, Michigan, United States
May 25th

Hansvedt SM-150B Sinker EDM 30 Amp 117 Volt Single phase Bausch and Lomb Acu-Rite Quickcount II 2 axis DRO Owners manual.

Edm pallets - 70mm x 70mm x 10 mm - 4 threaded holes

Bloomfield, Connecticut, United States
May 24th

EDM pallets - 70mm x 70mm x 10 mm - 4 threaded holes. There is 16 pieces in this lot. The units are in good cosmetic condition, and come as shown in the photo.

Edm toolholding fixture yh006

Dayton, Ohio, United States
May 24th

(one) EDM tool holding fixture , 80mm diameter with D-06 tapered shaft chuck holder . $12 shipping in the continental U.S. You can send text messages to my cell phone at 9374165497@vtext.com D-13603 , 04 , 05 If you have any questions, please email me!

Sinker edm machine, chevalier

Glendale, California, United States
May 24th

Chevalier Sinker EDMsmall size table30 A12000 hrin good condition Sale as is Pickup by customer. pickup location, San Fernando, CA

System 3r 54mm pallet with clamp/vise stk 5642

Wadley, Alabama, United States
May 24th

SYSTEM 3R 54MM PALLET WITH CLAMP/VISE STK 5642 NOTE SPOTWELD ON EDGE Customer service is very important to our business. We continually strive to improve our services in order to meet our customers expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases.

2002 elox corporation agie mondo 50 edm sinker machine great condition low hours

Greer, South Carolina, United States
May 24th

2002 Elox Corporation AGIE MONDO 50 EDM SINKER Machine GREAT CONDITION - VERY LOW HOURS AS YOU CAN SEE IN THE PICTURE.

System 3r 54mm pallet with t slot block stk 5657

Wadley, Alabama, United States
May 24th

SYSTEM 3R 54MM PALLET WITH T SLOT BLOCK STK 5657 Customer service is very important to our business. We continually strive to improve our services in order to meet our customers expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases.

1-10l ex-cell-o edm machine

Rockport, Indiana, United States
May 24th

Listing: * Complete EX-CELLO-EDM Machine 1-10L* Service Manual Details: We purchased this unit used a few years ago -cleaned it up and serviced it to good working condition for our machine shop. Only used it a couple times since then. Full Spec Sheet showing in the pictures.

2 sets of ics 430.00 and ics 415.00 edm tooling

Salisbury, North Carolina, United States
May 24th

These are extras I just don't need. Believe it or not, new retail was around $5,000. Please note the thread size for for the 2 long clamps is M5 x 0.8 mm.

Colombia znc edm machine 300 amp power supply

Mentor, Ohio, United States
May 24th

For sale is a Columbia ZNC EDM machine with a powerful 300 amp power supply in excellent condition.10 step down power Z axis Great machine for moving lots of metal fast. Barely used in last 8 years.X travel 19.5"Y travel 15.5"Z travel 8"Tank 44" X 25" X 22" Deep55 gallon drum of rusllic 244 die electric oil included2 available. Buy it now.

System 3r 3r-605.2 e drawbar set of 5ea

Hudson, Florida, United States
May 24th

System 3R 3R-605.2 E Drawbar set of 5ea. New in box.. Actual pic.

System 3r 3r-658.1e-s hold macro set of 2ea

Hudson, Florida, United States
May 24th

System 3R 3R-658.1E-S Hold Macro set of 2ea New in box.. Actual pic.

Hirschmann edm system h 8.811 pallet clamper

Spring Grove, Pennsylvania, United States
May 24th

H 8.811 Pallet Clamper, ManualTool is like new. Used to machine and hold electrodes in System H pallets With frictional clamping. The four precise ground supporting faces help to seat the clamper on the machine and allow horizontal and vertical application.

System 3r pallet

Taylors, South Carolina, United States
May 24th

System 3R Pallet New with out original packaging Part number unknown Pallet Specs. Pallet is 54mm square. Pallet 6mm Bolt and 6mm holes are on a 42mm bolt circle

20x nos soviet ussr graphite, carbon rod, electrode (18mm x 255mm)! or more!

Dnepropetrovsk, default, Ukraine
May 24th

20x NOS soviet GRAPHITE, CARBON rod, electrode (18mm x 255mm)! or MORE! Weight = 110 grams for each one!

Edm power supply nihon protector ps8114

Dayton, Ohio, United States
May 24th

(one) EDM power supply , Nihon Protector , PS8114 , 200 vac input , 400 4dc output , unused . $65 shipping in the continental US to a business address. You can send text messages to my cell phone at 9374165497@vtext.com D-14044 , 45 , 46 If you have any questions, please email me!